低压电、汽两用节能加热锅炉的结构特点

通过对电、汽两用节能加热锅炉的描述,指出该设备具有投资少,无污染,能源转化率高,起停速度快,负荷调节范围大,结构简单,安全性能好并可充分利用电能等特点.     

多年鼎足,今朝一统--国家信息安全产品认证管理委员会成立

我国信息安全产品认证管理委员会的成立,标志着建立统一的信息安全认证认可体系的工作进入了实质性的实施阶段。有关高层主管纵论统一认证认可的意义、目标和希望,并勾勒出五年发展的大体框架。     

JOINING MECHANISMS OF β''''-Al2O3 CERAMIC AND PYREX GLASS TO Al MATRIX COMPOSITE

The bonding of β'-Al2O3 and pyrex glass to Al matrix composites by anodic bonding process is achieved. The microstructure of the bonded interface and the joining mechanisms are analyzed with scanning electron microscope (SEM), energy dispersive X-ray fluorescence spectrometer (EDX). It is observed that the bonding region across the interface consists of the metal layer, oxide transitional layer and the ceramic layer, with the transitional layer composed of surface region and sub-surface region. The bonding process can mainly be categorized into anodic bonding process and solid state diffusing process. The pile-up of the ions and its drift in the interface area are the main reasons for anode oxidation and joining of the interface. The temperature, voltage and the drift ions in the ceramic or glass during the bonding process are the essential conditions to solid state diffusing and oxide bonding at the interface. The voltages, temperature, pressure as well as the surface state are the main factors that influence the anodic bonding.     

兰州重离子加速器大型真空室

已建成的兰州重离子加速器的真空室是一个大型整体结构的超高真空容器,直径约10m,高4.5m,重65000kg,内表面积211m~2,容积100m~3,工作真空度为5×10~(-5)Pa。采用有限单元法在计算机上用SAP-5C程序对真空室受力分析进行了计算。真空室结构材料选用瑞典Uddeholm钢厂生产的316 L 超低碳不锈钢。承制此大型容器的是航天工业部风华机器厂。由于结构庞大,首先将真空室分成八大块和几小块在工厂制造,然后运至现场焊制成一整体容器并进行机械加工。所有密封焊缝均用着色渗透液,X-射线探伤和氦质谱探漏仪进行检查和探漏。     

以天下之利供天下之需

长期以来,国外信息安全公司在中国的发展,交织着两种矛盾的现象: 一方面,国外安全公司在国内信息安全市场上坐拥半壁河山的份额,早些时候在高端市场 上更是占据着统治地位,其技术水平也被认为具有领先的优势。 另一方面,国外安全公司在国内的业务又时常被国内一些企业或机构所责难,认为它有碍 国家安全而要求加以限制或者规避。     

阿拉丁重构在华业务

重新认识中国市场时隔1个月以后,阿拉丁知识系统有限公司创始人、总裁、首席执行官Yanki Margalit携带几位高级助手再次踏上了中国的土地,Yanki Margalit一行2005年6月初在北京嘉里中心举办酒会,面对到会的国内诸位嘉宾和媒体记者,Yanki Margalit 筹躇满志地宣称,阿拉丁将总结以往的经验,以新的姿态重构在华业务。     

试论QC小组活动与企业文化建设相结合

本文分析了QC小组活动与企业文化的特点与共同点,提出开展QC小组活动与企业文化建设是互相促进,互相补充的,两者可以互相结合。     

Realization of Tapered Waveguide by Stretching the Rod Waveguide

By stretching the rod waveguide with different velocities in opposite directions, the tapered waveguide can be fabricated. In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors, that is the ratio of two velocity and the heated region length, is presented for the shape of the taper transition through mathematic deduction. Based on this model, a desired tapered waveguide can be fabricated. The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors. In addition, the conclusion can be used for fabricating fused fiber coupler.     

改进异步电机直接转矩控制系统的仿真研究

本文介绍了直接转矩控制系统的控制原理,并针对基于直接转矩控制的异步电动机运行时存在较大的电流及转矩脉动问题,提出一种新的控制方案,并基于Matlab 6.5对这种新方法进行仿真,仿真结果表明该方案能有效的解决电流及转矩脉动的问题.     

金属基复合材料的热残余应力力学模型研究进展

金属基复合材料在高温制备的冷却过程中或热处理过程中由于组分间热膨胀系数（CTEs）的差异会产生较大的热残余应力，热残余应力对复合材料的宏观性能有着重要的影响。本文综述了分析金属基复合材料热残余应力的有限元模型和解析模型等理论模型，并指出有待深入研究的问题。