Cuticle chirality and body handedness in Caenorhabditis elegans

BACKGROUND AND PURPOSE: Norway has the highest reported incidence of hip fractures in western Europe. Little is known about the epidemiology of falls in Norway where the winter season is long and dark. The objective of this work was to study reported falls and their consequences among elderly Norwegians living at home. METHODS: A cross-sectional design was used for the study. Interviews were performed in the homes of 431 subjects, aged 67-97 years, living at home. Information on falling was gathered through six questions: whether the subject had fallen during the last six months, and if so, how many falls they had, where the last fall occurred, its perceived reason, the activity the subject had been engaged in when the fall occurred, and the resulting injury. RESULTS: In all, 24.1% of subjects reported falling during the last six months, and 9.5% had suffered more than one fall. Falls were most frequently linked to external events (63.1%). Outdoor falls were more frequent (59.0%; 95% CI = 51.2-82.0) than indoor falls. Older subjects were associated with more frequent indoor falls (p < 0.05), but gender was not significant. Fifty-one per cent of subjects had fallen while walking and 53% had suffered an injury from the last fall. In 13.4% of the women and 16.2% of the men, the last fall had resulted in a fracture. CONCLUSIONS: Compared to the results of other studies from industrialized Western countries, a similar crude fall rate, similar frequency and similar type of injury were found. However, in contrast to other studies, no gender difference was observed with regard to falling, place of falling and fracture rate.     

Equivalent oxygen percentage as a function of hydration in hydrogel lenses: an in vivo study

Although many investigations have examined the parameters of hydrogel lens hydration loss, the in vivo effect (in humans) on lens oxygen behavior has not been characterized previously. Human subjects wore 2 different lenses (a thin, 38% water polymacon lens and a thin, 55% water bufilcon lens) for 5-min periods under either fully hydrated (i.e., with saline regularly applied to the lens) or partially hydrated (i.e., with "normal" wear of 1 blink every 5 s) conditions. An equivalent oxygen percentage (EOP) technique and a gravimetric method were used to determine lens oxygen behavior and hydration, respectively. The hydration results demonstrate that significant lens dehydration occurs during the partially hydrated (normal blink rate) condition compared to the in situ, fully hydrated situation. A corresponding, statistically significant diminution in oxygen equivalency was also observed.     

Thermal Decomposition of Europium Hydroxide

The thermal decomposition of europium hydroxide in an air atmosphere was investigated by means of weight-loss measurements, infrared spectroscopy, X-ray diffraction analysis, and electron microscopy. These studies showed that EU(OH)° decomposed at temperatures between 225° and 300°C into EuOOH, which was stable up to about 425°C. Between 435° and 465°C this compound decomposed into cubic Eu₂O₃, which was stable until its inversion to the high-temperature monoclinic form. X-ray diffraction data were collected for Eu(OH)₃ and EuOOH and showed that the trihydroxide has a hexagonal crystal structure and the oxyhydroxide is possibly orthorhombic. The Eu(OH)₂, EuOOH, and cubic EunOa powders contained particles up to several microns in size consisting of agglomerates of crystallites in the size range 200 to 400 A. The single monoclinic Eu₂O₃ sample studied contained crystallites whose average size was greater than 2000 A.     

X-Ray, Micro-Raman, Optical Absorption/Emission Studies of ErNbO4 Grown by Vapor Transport Equilibration

Vapor transport equilibration (VTE) treatments were performed on a Y-cut bulk Er (1.6 mol%)-doped congruent LiNbO₃ crystal and an X-cut pure congruent crystal, on one surface of which a 40 nm-thick film of erbium metal was coated before the VTE treatment. Scanning electron microscope, powder or single-crystal X-ray diffraction (XRD), polarized infrared absorption/emission of Er³⁺ as well as micro-Raman spectroscopy were used to study the two VTE crystals. The results are discussed in comparison with a corresponding as-grown bulk Er-doped crystal, calcined ErNbO₄ powder, and a locally Er-doped congruent LiNbO₃ crystal prepared by using the standard Er-diffusion technique. The experimental results show that the VTE treatment induces the formation of micrometer-sized ErNbO₄ precipitates with the crystallographic morphology of a flat polyhedron not only on the surfaces of both crystals but also in the bulk of the homogeneously Er-doped one. The optical absorption and emission studies show that the formation of the precipitates results in substantial spectral changes in both the 0.98 and 1.5 μm regions. The micro-Raman studies allow to resolve four additional Raman peaks around 800 cm⁻¹ in the E(TO) spectra of the two VTE crystals. These additional Raman peaks are associated with the characteristic vibrations with respect to the NbO₄³⁻ group. Characteristic XRD, optical absorption, and emission and Raman peaks for identifying the ErNbO₄ phase are proposed. Finally, the formation mechanism and light-scattering effect of the precipitates are discussed.     

Critical evaluation of coupling particle size distribution with the shrinking core model

The shrinking core model (SCM) is widely used to model fluid-solid reactions such as the leaching of metals from minerals. In most cases, however, the particle size distribution (PSD) of the solid material was disregarded. In this paper the erroneous shift in the control regime when neglecting PSD was quantified and the dependence of the shift on the coefficients of variation (CV) and the type of PSD was analysed. By coupling the SCM with a Gamma PSD, it was found that neglecting the PSD would shift the control regime from chemical reaction to inert/ash layer diffusion, when the CV was between 0.7 and 1.2. For a system controlled by liquid film diffusion, neglect of the PSD, would shift the control regime to chemical reaction when CV is between 0.3 and 0.7 or to inert/ash layer diffusion when CV is greater (0.9-1.5). It was therefore postulated that some researchers had unknowingly made invalid conclusions about the control regime due to the neglect of PSD. However, an inert/ash layer diffusion-controlled process was insensitive to the neglect of PSD. When CV<0.3, neglect of the PSD would not cause any erroneous shifts, irrespective of the control regime. Experimental data confirmed the observation. For a given CV, the deviation in the fraction reacted from the mono-PSD increases with CV and decreases with time. The maximum deviation, which occurs at the beginning, is about 10% with a gamma PSD of CV=0.3. The percent deviation is dependent of the type of PSDs. Gamma PSD gives the lowest deviation while Gaudin-Schuhmann results in the largest deviation (maxi. ∼19%, with CV=0.3) in the first half of dissolution process. Log-normal distribution gives a larger deviation than gamma but quickly approaches the latter with time. The deviation for Rosin-Rammler is between log-normal and Gaudin-Schuhmann. For systems with CV less than 0.3, the SCM can be fairly used without considering PSD. When CV is greater than 0.3, particularly in the early stage of a dissolution process with a PSD other than gamma, PSD should be included to avoid substantial errors.     

Microstructure of high modulus solid state extruded polyethylene: 2. X-ray scattering studies of 12, 24 and 36 extrusion draw ratio

The microstructure of a series of solid state extruded polyethylene fibres was examined by wide- and small-angle X-ray scattering. By measuring absolute intensities using a two dimensional position sensitive detector, accurate values of the small-angle invariant for anisotropic samples were obtained. This measurement coupled with wide-angle X-ray scattering and d.s.c. permitted determination of the density of the noncrystalline component. The use of a two phase model for solid state extruded polyethylene is justified if consideration is given to the effective densities of the crystalline and noncrystalline phases, which change with deformation. The effective density of the crystalline phase decreases by 1% (0.999–0.990 g cm^?3) from the unextruded billet compared to a 36 draw ratio extrudate, while the noncrystalline phase density increases by 6% (0.84–0.89 g cm^?3). These changes lead to an overall decrease in the mean squared electron density fluctuation of 63%. The average axial crystallite length measured by wide-angle X-ray scattering increases with extrusion draw ratio while the SAXS long period decreases and weakens considerably. These observations and the electron microscopy results from the previous paper, (Polymer, 1982, 23, 1069), are fully consistent with the key features of the Peterlin model of fibre microstructure.