KCNQ1 Haplotypes Associate with Type 2 Diabetes in Malaysian Chinese Subjects

The aim of this study was to investigate the association of single nucleotide polymorphisms (SNPs) and haplotypes of potassium voltage-gated channel, KQT-like subfamily, member 1 (KCNQ1) with type 2 diabetes (T2D) in Malaysian Chinese subjects. The KCNQ1 SNPs rs2237892, rs2283228 and rs2237895 were genotyped in 300 T2D patients and 230 control subjects without diabetes and metabolic syndrome. Two logistic regression models of analysis were applied, the first adjusted for age and gender while the second adjusted for age, gender and body mass index. The additive genetic analysis showed that adjusting for body mass index (BMI) even strengthened association of rs2237892, rs2283228 and rs2237895 with T2D (OR = 2.0, P = 5.1 × 10(-5); OR = 1.9, P = 5.2 × 10(-5); OR = 1.9, P = 7.8 × 10(-5), respectively). The haplotype TCA containing the allele of rs2237892 (T), rs2283228 (C) and rs2237895 (A) was highly protective against T2D (Second model; OR = 0.17, P = 3.7 × 10(-11)). The KCNQ1 rs2237892 (TT), and the protective haplotype (TCA) were associated with higher beta-cell function (HOMA-B) in normal subjects (P = 0.0002; 0.014, respectively). This study found that KCNQ1 SNPs was associated with T2D susceptibility in Malaysian Chinese subjects. In addition, certain KCNQ1 haplotypes were strongly associated with T2D.     

Effect of atomic layer deposition temperature on the performance of top-down ZnO nanowire transistors

This paper studies the effect of atomic layer deposition (ALD) temperature on the performance of top-down ZnO nanowire transistors. Electrical characteristics are presented for 10-μm ZnO nanowire field-effect transistors (FETs) and for deposition temperatures in the range 120°C to 210°C. Well-behaved transistor output characteristics are obtained for all deposition temperatures. It is shown that the maximum field-effect mobility occurs for an ALD temperature of 190°C. This maximum field-effect mobility corresponds with a maximum Hall effect bulk mobility and with a ZnO film that is stoichiometric. The optimized transistors have a field-effect mobility of 10 cm²/V.s, which is approximately ten times higher than can typically be achieved in thin-film amorphous silicon transistors. Furthermore, simulations indicate that the drain current and field-effect mobility extraction are limited by the contact resistance. When the effects of contact resistance are de-embedded, a field-effect mobility of 129 cm²/V.s is obtained. This excellent result demonstrates the promise of top-down ZnO nanowire technology for a wide variety of applications such as high-performance thin-film electronics, flexible electronics, and biosensing.     

Phase Transformations of α-Alumina Made from Waste Aluminum via a Precipitation Technique

We report on a recycling project in which α-Al₂O₃ was produced from aluminum cans because no such work has been reported in literature. Heated aluminum cans were mixed with 8.0 M of H₂SO₄ solution to form an Al₂(SO₄)₃ solution. The Al₂(SO₄)₃ salt was contained in a white semi-liquid solution with excess H₂SO₄; some unreacted aluminum pieces were also present. The solution was filtered and mixed with ethanol in a ratio of 2:3, to form a white solid of Al₂(SO₄)₃·18H₂O. The Al₂(SO₄)₃·18H₂O was calcined in an electrical furnace for 3 h at temperatures of 400–1400 °C. The heating and cooling rates were 10 °C/min. XRD was used to investigate the phase changes at different temperatures and XRF was used to determine the elemental composition in the alumina produced. A series of different alumina compositions, made by repeated dehydration and desulfonation of the Al₂(SO₄)₃·18H₂O, is reported. All transitional alumina phases produced at low temperatures were converted to α-Al₂O₃ at high temperatures. The X-ray diffraction results indicated that the α-Al₂O₃ phase was realized when the calcination temperature was at 1200 °C or higher.     

Yield stress distribution in injection‐moulded glassy polymers

A methodology for structural analysis simulations is presented that incorporates the distribution of mechanical properties along the geometrical dimensions of injection‐moulded amorphous polymer products. It is based on a previously developed modelling approach, where the thermomechanical history experienced during processing was used to determine the yield stress at the end of an injection‐moulding cycle. Comparison between experimental data and simulation results showed an excellent quantitative agreement, both for short‐term tensile tests as well as long‐term creep experiments over a range of strain rates, applied stresses, and testing temperatures. Changes in mould temperature and component wall thickness, which directly affect the cooling profiles and, hence, the mechanical properties, were well captured by the methodology presented. Furthermore, it turns out that the distribution of the yield stress along a tensile bar is one of the triggers for the onset of the (strong) localization generally observed in experiments. © 2015 Society of Chemical Industry     

Cover Image,Volume 92, Issue 9

The cover image, by José Antonio Díaz et al., is based on the Research Article Kinetic modelling of the glycerol oxidation in the liquid phase: comparison of Pt, Au and Ag AS active phases, DOI: 10.1002/jctb.5296 . Photo Credit: CNRS Photothèque / Cyril FRESILLON.

     

Synthesis and characterization of novel organotin monomers and copolymers and their antibacterial activity

Two novel organotin monomers, (N‐tri‐n‐butyltin) maleimide and m‐acryloylamino‐(tri‐n‐butyltin benzoate), were synthesized. Copolymerization of these two monomers with styrene was carried out in the bulk at 65°C using asobisisobutyronitrile as the free radical initiator. The monomers and copolymers were characterized by elemental analysis; the molecular weights of the copolymers were determined by GPC, solubility, IR, and ¹H‐NMR spectral studies. The antibacterial activities of the synthesized organotin monomers and copolymers toward various types of bacteria were also reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 740–745, 2000     

Advances in Applying Computer-Aided Drug Design for Neurodegenerative Diseases

Neurodegenerative diseases (NDs) including Alzheimer’s disease, Parkinson’s disease, amyotrophic lateral sclerosis, and Huntington’s disease are incurable and affect millions of people worldwide. The development of treatments for this unmet clinical need is a major global research challenge. Computer-aided drug design (CADD) methods minimize the huge number of ligands that could be screened in biological assays, reducing the cost, time, and effort required to develop new drugs. In this review, we provide an introduction to CADD and examine the progress in applying CADD and other molecular docking studies to NDs. We provide an updated overview of potential therapeutic targets for various NDs and discuss some of the advantages and disadvantages of these tools.     

DEHYDRATION BY DESORPTION AND BY SPRAY DRYING OF DAIRY PROTEINS: INFLUENCE OF THE MINERAL ENVIRONMENT

A drying method by desorption in a water activity meter was used to simulate the conditions of spray drying and to determine the water transfer inside dairy concentrates towards the surface and from the surface to the drying air. The concentrates were also spray dried and solubility index of powders were determined during reconstitution. Whey protein concentrates (WPC) and native phosphocaseinate suspensions (NPCS) were used to study the effect of NaCl (420 mM), CaCl₂ (222 raM), sodium phosphate (173 mM) and sodium citrate (238 mM) on the water transfers. The decrease in water transfer during drying was explained by the high hygroscopicity of added mineral salts to WPC. NaCl addition to NPCS decreased the water transfer during drying, but increased the solubility index. Citrate and phosphate addition to NPCS increased the water transfer during drying and reconstitution. CaCl₂ increased the water transfer during drying but the solubility index was always low. Results are discussed as a function of the aqueous environment, of the nature of mineral salts, of the structure of dairy proteins and of protein solvation.