高温下煤焦气化反应特性(Ⅰ)灰分熔融对煤焦气化反应的影响

在900～1500℃灰分的熔融温度范围内和常压下,研究了煤焦与二氧化碳的气化反应。实验研究发现,活化能随气化过程而变化,除反应初期外,气化反应严重受内扩散过程的影响。高温下的煤焦气化存在一个特性温度,在该温度下,反应中、后期气化速率显著降低,其影响范围在特性温度上下约200～300℃。特性温度与煤种及灰分性质等因素有关,一般低于其相应灰分的软化点温度。     

两种高压直流电源的比较及在铜冶炼烟气制酸装置电除雾器中的应用

论述恒压源与恒流源两种高压直流电源的工作原理和技术特点.对两种电源常见故障的原因进行分析，提出相应的解决方法。介绍两种电源在230kt／a诺兰达炉冶炼烟气和270kt／a转炉冶炼烟气制酸装置的电除雾器中的使用情况.     

PVC用ACR加工助剂的作用

简要介绍了ACR加工助剂发展历史及其改进PVC加工性能的作用，包括对PVC的离模膨胀、熔体破裂、熔体粘度和融化的影响。并讨论了不同生产商的ACR加工助剂及其在PVC中的不同用途。     

正交法在PTA生产中粒径控制上的应用

介绍了正交试验法在PTA生产中粒径控制上的应用。对第一、二结晶器采用L9( 34)正交表进行试验 ,选出最优操作方案为第一结晶器液位为 2 6 %、压力为 3 6 0 0kPa ,第二结晶器液位为 45 .5 % ,压力为 2 40 0kPa ,结果是 :平均粒径从原来的 ( 118± 10 ) μm控制到 ( 118± 8) μm左右 ,粒径小于 45 μm的从原来的 2 0 %下降到 15 %左右 ,粒径 2 5 0 μm以下的由 93 %上升到95 %左右     

Interactions between Cytochrome c and DNA Strands Self-Assembled at Gold Electrode

In this work, we reported the investigation on the interaction between DNA strands self-assembled at gold electrodes and an electron transfer protein, cytochrome c. We observed that cytochrome c exhibited well-defined electrochemistry in both double-stranded and single-stranded DNA films. This suggested that the electron transfer reaction of cytochrome c arose possibly due to the electron hopping along DNA strands rather than wiring along the double helix. We also compared the heterogeneous electron transfer rate of cytochrome c with that of a ruthenium complex, which further confirmed this mechanism.     

重组铜绿假单胞菌外毒素A工程菌发酵及表达产物的纯化

目的建立稳定、高效表达重组铜绿假单胞菌外毒素A(rEPA)的工程菌发酵及表达产物纯化工艺。方法规模化发酵表达rEPA的重组大肠杆菌rPE553D,离心收集菌体,渗透压调解使菌体周质间隙蛋白释放后,高速离心收集蛋白溶液。经DEAESepharoseFF、PhenylSepharose6FF疏水层析和SOURCE30Q强离子交换层析,超滤浓缩纯化rEPA。用HPLC、SDS-PAGE和Westernblot等方法检定生化和免疫学特性,并用小鼠和Vero细胞检定毒性。结果每55L培养基中rEPA产量超过4g,纯度在95%以上,细胞毒性降低了至少32000倍。其余各项指标均符合《中国生物制品规程》要求。结论已建立了收率高、纯度好、稳定、适合规模化生产rEPA的工艺。     

Phase Behavior and Mechanical Properties of Siloxane-Urethane Copolymer

Two series of siloxane-urethane copolymers were prepared from polydimethylsiloxane (PDMS) with a molecular weight of 1000 or 1800 which was used as a soft segment, 4,4′-diphenylmethane diisocyanate (MDI) and 1,4-butanediol (1,4-BD). Differential scanning calorimetry (DSC) demonstrated that the position (T_gs) and breadth (ΔB) of soft-segment glass transition of copolymers remained constant as the hard-segment content increased. Heat capacities at soft-segment glass transition of the copolymer (ΔCp) were 0.195∼0.411 J/g^○C and heat capacities of pure PDMS (ΔCp₀) were 0.571∼0.647 J/g^○C, leading to the various ΔCp/ΔCp₀ ratios. The ΔCp/ΔCp₀ ratios decreased as the increasing of hard-segment content, showing poor phase separation. The FTIR spectrum confirmed the occurrence of hydrogen bonding in ether end-group of pure PDMS. The ether group of the soft segment led to interfacial mixing between soft and hard segments. The tan δ of the soft segment determined by dynamic mechanical testing (DMA) also identified the mixing of soft and hard segments. The mechanical properties of the copolymer were directly related to either the soft and hard segment contents or the chain lengths of soft and hard segments. The hard segment that reinforced the soft segment and interfacial thickness between soft and hard segment dominated the mechanical properties.     

Preparation and characterization of high-surface-area titanium dioxide by sol-gel process

One of the important ways to improve photocatalytic efficiency is to prepare catalyst with enhanced surface area. In this work, titanium dioxide (TiO₂) nanoparticles having enhanced surface area were synthesized under the interference of SiO₂. The mixed oxide, SiO₂-TiO₂ (10% mol% Si), was prepared by a sol-gel procedure using titanium tetra-n-butoxide as Ti-precursor. The commercial SiO₂ nanoparticles were added into the TiO₂ sols after hydrolysis. After condensation and calcination heat treatment, the SiO₂-TiO₂ nanoparticles were obtained. To achieve the purpose of obtaining the high-surface-area TiO₂, the SiO₂ was removed subsequently by aqueous NaOH solution. The TiO₂ products were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), electron spectroscopy for chemical analysis (ESCA), and by N₂ adsorption-desorption isotherm. A fine mesoporous structure was formed for as-prepared TiO₂ after calcination at 400^∘C and the average pore diameter was about 7 nm. The porous TiO₂ products possess mixing phases of anatase and rutile. Phase transformation from anatase to rutile occurred when the samples were calcined. The phase transition temperature is sensitive to the silicon content. The particle size of ∼43 nm remained constant upon calcinations from 500 to 700^∘C. The specific surface area was increased up to 66% compared to regular TiO₂ samples that were prepared by the similar sol-gel procedure. The porous TiO₂ nanostructures exhibited enhanced photocatalytic performance to decompose methylene blue under UV irradiation.     

基于包围盒和空间分解的碰撞检测算法

文中提出一种基于包围盒和空间分解的碰撞检测算法,用以解决软体的碰撞检测。算法使用AABB包围盒做初步检测,确定可能发生碰撞的物体。再根据包围盒的重叠情况缩小可能发生碰撞的区域,利用哈希表作为数据储存结构进行空间分解,将物体包围盒重叠区域的基本几何元素的空间网格映射到哈希表中,将碰撞区域缩小到基本几何元素,最后用基元碰撞检测找出具体碰撞点。由于前期AABB包围盒的处理减少了空间分解阶段需要映射的基本几何元素数量,该算法具有较高的运算速度。     

面向语义网的中文本体应用研究

自从Protege出现以来,它成为唯一一款支持中文本体构建的工具,而且能够进行可视化操作。目前在部分领域已经构建了中文本体,但是对所构建本体在语义网中的应用缺乏研究。因为本体的应用主要依赖于推理工具,而国内尚无一款专业的基于中文本体的推理机或者推理工具,这阻碍了基于中文本体信息检索的发展。针对中文本体的应用,深入研究了本体在信息检索领域应用的现有技术、方法、工具。文中通过使用Jena开发包对中文本体的应用进行实验,实验表明,利用现有的推理工具等可以实现中文本体在语义网中的应用。