A fast algorithm and practical considerations for passive macromodeling of measured/simulated data

Passive macromodeling of high-speed package and interconnect modules characterized by measured/simulated data has generated immense interest during the recent years. This paper presents an efficient algorithm for transient simulation of interconnect networks characterized by measured/simulated data in the presence of other linear and nonlinear devices. A new set of linear constraints are proposed, which help in preserving the passivity of resulting macromodels. Examples are presented to demonstrate the validity and efficiency of the proposed algorithm.     

A biomorphic digital image sensor

An arbitrated address-event imager has been designed and fabricated in a 0.6-/spl mu/m CMOS process. The imager is composed of 80 /spl times/ 60 pixels of 32 /spl times/ 30 /spl mu/m. The value of the light intensity collected by each photosensitive element is inversely proportional to the pixel's interspike time interval. The readout of each spike is initiated by the individual pixel; therefore, the available output bandwidth is allocated according to pixel output demand. This encoding of light intensities favors brighter pixels, equalizes the number of integrated photons across light intensity, and minimizes power consumption. Tests conducted on the imager showed a large output dynamic range of 180 dB (under bright local illumination) for an individual pixel. The array, on the other hand, produced a dynamic range of 120 dB (under uniform bright illumination and when no lower bound was placed on the update rate per pixel). The dynamic range is 48.9 dB value at 30-pixel updates/s. Power consumption is 3.4 mW in uniform indoor light and a mean event rate of 200 kHz, which updates each pixel 41.6 times per second. The imager is capable of updating each pixel 8.3K times per second (under bright local illumination).     

A statistical model for estimating the trend of electrical quantities in power systems

A statistical approach to estimate the trend, over a long time interval, of electrical parameters is proposed in this paper. The trend is determined by processing a limited number of parameter values measured at instants randomly chosen. Experimental results are reported, which show the good performance of the method proposed when it is applied to estimate customers' loads profiles and the trend of some parameters providing information on power quality.     

The stress-whitened damage zone of PVC blends

The stress-whitened damage zone that formed ahead of a semicircular notch during slow tensile loading has been measured from optical micrographs of translucent blends of poly(vinyl chloride) (PVC) with experimental chlorinated polyethylene (CPE) resins. When the zone was small, the plane strain condition applied and from the elastic stress distribution a constant mean stress condition was found at the boundary of the crescent-shaped zone. The critical mean stress did not depend on the chlorine content or the chlorine distribution of the experimental CPE resin used in the blend. While the critical mean stress decreased as the amount of CPE in the blend was increased, the critical volume strain, calculated from the bulk modulus, was independent of composition and was thought to be the controlling parameter for stress-whitening. When the zone was larger, the shape was qualitatively described by concepts of stress redistribution in the presence of a plastic zone ahead of the notch. Macroscopic flow and necking were only detected near the maximum in the stress-displacement curve.     

Corrosion behaviour of copper-reinforced carbon electrodes in dilute hydrochloric acid solutions

The corrosion behaviour of experimentally prepared copper-reinforced carbon electrodes in dilute hydrochloric acid is investigated. The electrodes are not only directly attacked by the acid, but they are also subjected to galvanic corrosion. The baking temperature and time are the most crucial processing variables. A minimum in the corrosion rate is always achieved when the electrodes are baked at 400 °C for 1.5 h, the level depending on the copper content. The corrosion resistance increases progressively with the baking temperature as long as the baking time is less than 1.5 h. Baking for more than 1.5 h results in increasing corrosion rate. The presence of copper increases the corrosion resistance of the prepared electrodes.     

Monolithic integration of a 5.3 GHz regenerative frequency divider using a standard bipolar technology

A monolithic microwave frequency divider IC with an operating range of 1.4?5.3 GHz was developed and fabricated in a standard bipolar technology. The circuit operates on the principle of `regenerative frequency division?. Compared to the most popular divider concepts based on a master-slave D-flip-flop, an almost twice as high input frequency can be divided, provided that the same technology is used. A further advantage is the low power consumption.     

The influence of annealing on the conductivity of magnesium films

Polycrystalline magnesium films were deposited under ultrahigh vacuum by thermal evaporation onto a cooled silica substrate. During the growth process of a film a number of lattice defects are incorporated. It was found that the defect density decreases with increasing thickness. An annealing study of the electrical resistance and defect density in magnesium films was made. The results were interpreted on the basis of Vand's theory. The function F₀ expressing the law of distribution of the decay energies exhibited a maximum. For thick films there was no appreciable variation in the activation energy with thickness. In this case the evaluated activation energy E was found to be about 0.35 eV. For very thin films this energy decreases with increasing thickness.