2‐Acetyl‐4,6,8,10,12‐Pentanitro‐Hexaazaisowurtzitane (PNAIW) Preparation and Properties

2‐Acetyl‐4,6,8,10,12‐pentanitro‐2,4,6,8,10,12‐hexaazaisowurtzitane (PNAIW) is formed in the last step of nitration of acetyl isowurtzitane derivatives. The amount of the PNAIW formed depends on the conditions of the nitration reaction (temperature, time, and nitrating mixture used) and on the type of the starting acetyl intermediate. The highest PNAIW yields (30 %) were obtained by nitrating 2,6,8,12‐tetraacetylhexaazaisowurtzitane (TAIW) at 60 °C for half an hour using HNO₃/H₂SO₄ nitrating mixture. HPLC, NMR, FTIR, and DSC measurements were used in the study and their results are reported.     

The Effect of Exogenous Application of Quercetin Derivative Solutions on the Course of Physiological and Biochemical Processes in Wheat Seedlings

Quercetin, classified as a flavonoid, is a strong antioxidant that plays a significant role in the regulation of physiological processes in plants, which is particularly important in the case of biotic and abiotic stresses. The study investigated the effect of the use of potassium quercetin solutions in various concentrations (0.5%, 1.0%, 3.0% and 5.0%) on the physiological and biochemical properties of wheat seedlings. A pot experiment was carried out in order to determine the most beneficial dose of this flavonoid acting as a bio-stimulant for wheat plants. Spraying with quercetin derivative solutions was performed twice, and physiological measurements (chlorophyll content and fluorescence as well as gas exchange) were carried out on the first and seventh days after each application. The total phenolic compounds content and the total antioxidant capacity were also determined. It was shown that the concentrations of potassium quercetin applied have a stimulating effect on the course of physiological processes. In the case of most of the tested physiological parameters (chlorophyll content and fluorescence and gas exchange) and the total antioxidant capacity, no significant differences were observed in their increase as a result of application with concentrations of 3.0 and 5.0%. Therefore, the beneficial effect of quercetin on the analysed parameters is already observed when spraying with a concentration of 3.0%.     

Small Alterations in Cobinamide Structure Considerably Influence sGC Activation

Specially designed B‐ring‐modified cobalamin derivatives were synthesized and tested as potential activators of soluble guanylyl cyclase (sGC). Herein, we disclose the influence of substituents at the c‐ and d‐positions in hydrophilic and hydrophobic cobyrinic acid derivatives on their capacities to activate sGC. The presence of the amide group at c‐/d‐position in cobyrinic acid derivatives strongly influence the level of sGC activation. Removal of the d‐position altogether has a profound effect for hydrophobic compounds. In contrast, little differences were observed in hydrophilic ones.     

Functionally Graded Ceramics Fabricated with Side‐by‐Side Tape Casting for Use in Magnetic Refrigeration

Functionally graded ceramic tapes have been fabricated by a side‐by‐side tape casting technique. This study shows the possibility and describes the main principles of adjacent coflow of slurries resulting in formation of thin plates of graded ceramic material. Results showed that the small variations of solvent and binder system concentrations have a substantial effect on slurry viscosity. Varying these parameters showed that side‐by‐side tape casting with a well‐defined interface area is possible for slurries with viscosities above 3500 mPa s at a casting shear rate of 3.3 s^?1. As it was expected, the choice of de‐bindering and sintering regimes significantly influences crack formation, and a three‐step heating programme was found to result in tapes of the highest quality. The interface regions of green graded tapes were investigated structurally by scanning electron microscopy; for a distinct identification of the interface region and analysing the degree of cross‐interface diffusion, the isothermal entropy change was measured by a vibrating sample magnetometer as the magnetic transition temperature (Curie temperature) is very sensitive to the dopant level in ceramics. Also the purpose of developing this graded ceramic tape casting was applications of these specific magnetocaloric properties within the magnetic refrigeration technology.     

Effect of the structure of polymer inclusion membranes on zn(II) transport from chloride aqueous solutions

This article presents application of polymer inclusion membranes (PIM) containing polymer matrices: cellulose triacetate (CTA) or poly(vinyl) chloride (PVC), o‐nitrophenyloctyl ether (NPOE) as a plasticizer and phosphonium ionic liquids, i.e., trihexyltetradecylphosphonium chloride (Cyphos IL 101), bis(2,4,4‐trimethylpentyl)phosphinate (Cyphos IL 104) and tributyltetradecylphosphonium chloride (Cyphos IL 167), as carriers for Zn(II) transport from chloride medium. Cyphos IL167 application as an ion carrier in PIMs is reported for the first time. The membrane composition is found to affect Zn(II) transport significantly. SEM and AFM images show the differences in the surface morphology of PVC and CTA based membranes. Better transport abilities of CTA membranes (Zn(II) recovery factors exceed 80%) compared with those of PVC, indicate that the structural differences between the two polymers play a crucial role for the membrane permeability. The best initial flux and permeability coefficient are obtained for the membranes with Cyphos IL 101 and Cyphos IL 104 as carriers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42319.     

Characteristics of carcass composition,fat metabolism and meat quality of genetically different pigs

The aim of the study was to quantify the differences in meat and fat quality and lipid metabolism of pigs with either high or medium capacity for lipid accretion. A total of 58 castrated males of the breeds German Saddle Back (SB) and German Landrace (DL) were included in the experiment. Animals were housed individually and fed twice daily semi ad libitum. Saddle Back pigs indicated a lower lean meat content (41.4% vs 52.6%) and a higher fat percentage (40.9% vs 28.2%) in comparison to DL as a result of high lipid accumulation. The larger fat content of SB was related to an increased intramuscular fat concentration of longissimus muscle. A significant correlation between intramuscular fat content and fatty acid composition was estimated in both breeds. The relative concentration of saturated fatty acids was significantly increased in SB pigs. The percentage of polyunsaturated fatty acids (8.3%) in SB muscle fat was significantly lower than in DL muscle fat (10.7%). The de novo biosynthesis of fatty acids resulted in mostly saturated fatty acids and oleic acid. The higher activities of lipogenetic enzymes in backfat of SB proved a higher lipogenetic capacity. There were no significant differences in meat quality traits of longissimus muscle between the two breeds.     

Hydrostatic pressure influence on electric relaxation response of bismuth manganite ceramics

Electrical impedance of bismuth manganite ceramics was studied under ambient and high hydrostatic pressure. Local disorder of crystal lattice was confirmed using XRD and DSC. Two relaxation processes were discerned. One was attributed to small polarons, which showed a changeover from variable range hopping features related to Fermi glass and structural disorder to the nearest neighbor hopping behavior in higher temperature range related to uniform distribution of energy levels. Hydrostatic pressure shortened relaxation times that would be interesting for applications. The second process, which was assigned to the nearest neighbor hopping of polarons, also exhibited a changeover to glassy features in a high-temperature range.     

Parameter Estimation for Incompressible Cake Filtration: Advantages of a Modified Fitting Method

There is a widely used linear strategy to determine the parameters specific cake resistance and filter medium resistance in incompressible cake filtration. In this article, it is intended to demonstrate that this strategy has some disadvantages and should be replaced by an alternative nonlinear approach which yields more exact results. Even though the gains in precision are small for most cases, the nonlinear strategy is favored because it involves no extra effort and is grounded in the same physical theory as the original approach. This claim is based on a broad simulation study using noisy data with known parameter values to compare both fitting strategies and judge their accuracies.     

Concept for a Hydrometallurgical Processing of a Copper-Cobalt-Nickel Alloy Made from Manganese Nodules

The processing of manganese nodules for the production of raw materials has been a subject of research for many decades. The nodules contain many valuable metals like copper, cobalt and nickel. In recent years, the German Federal Institute for Geoscience and Natural Resources developed a process for the processing of manganese nodules based on a combined pyro- and a hydrometallurgical route. Clausthal University of Technology was assigned to develop the hydrometallurgical process for the treatment of a FeNiCuCo alloy. The developed process consists of pressurized sulfuric acid leaching with the suppression of hydrogen gas formation, precipitation and solvent extraction.     

GC–MS analysis of oxysterols and their formation in cultivated liver cells (HepG2)

Oxysterols play a key role in many (patho)physiological processes and they are potential biomarkers for oxidative stress in several diseases. Here we developed a rapid gas chromatographic-mass spectrometry-based method for the separation and quantification of 11 biologically relevant oxysterols bearing hydroxy, epoxy, and dihydroxy groups. Efficient chromatographic separation (resolution ≥ 1.9) was achieved using a medium polarity 35%-diphenyl/65%-dimethyl polysiloxane stationary phase material (30 m × 0.25 mm inner diameter and 0.25 μm film thickness). Based on thorough analysis of the fragmentation during electron ionization we developed a strategy to deduce structural information of the oxysterols. Optimized sample preparation includes (i) extraction with a mixture of n-hexane/iso-propanol, (ii) removal of cholesterol by solid phase extraction with unmodified silica, and (iii) trimethylsilylation. The method was successfully applied on the analysis of brain samples, showing consistent results with previous studies and a good intra- and interday precision of ≤20%. Finally, we used the method for the investigation of oxysterol formation during oxidative stress in HepG2 cells. Incubation with tert-butyl hydroperoxide led to a massive increase in free radical formed oxysterols (7-keto-chol > 7β-OH-chol >> 7α-OH-chol), while 24 h incubation with the glutathione peroxidase 4 inhibitor RSL3 showed no increase in oxidative stress based on the oxysterol pattern. Overall, the new method described here enables the robust analysis of a biologically meaningful pattern of oxysterols with high sensitivity and precision allowing us to gain new insights in the biological formation and role of oxysterols.