Experimental and Numerical Simulations of Flow and Heat Transfer in Heat Exchanger Elements Using Liquid Crystal Thermography

Experimental and numerical investigation of heat transfer and fluid flow were conducted for classic heat exchanger elements (flat plate with fin-tubes in-line, staggered and with vortex generators) and corrugated-undulated ducts under transitional and weakly turbulent conditions.The dependence of average heat transfer and pressure drop on Reynolds number and geometrical parameters was investigated. Distributions of local heat transfer coefficient were obtained by using liquid crystal thermography and surface-averaged values were computed. Three-dimensional numerical simulations were conducted by a finite-volume method using a low-Reynolds number k-e model under the assumption of fully developed flow. Computed flow fields provided otherwise inaccessible information on the flow patterns and the mechanisms of heat transfer enhancement.     

Practical and theoretical limits for electrochemical double-layer capacitors

Two types of double-layer capacitors, based on carbon materials, were analysed: (1) an imaginary nano-capacitor assembled from single graphene sheets, separated by electrolyte layers (thickness of nanometers) and (2) a capacitor based on porous carbons. It has been shown that the maximum specific surface of a porous carbon material which may be used for the construction of a capacitor is ca. 2600 m² g⁻¹. The maximum energy density of an imaginary double-layer ‘nano-capacitor’, is close to 10 kJ kg⁻¹ at a voltage of U = 1 V (aqueous electrolyte) of ca. 40–45 kJ kg⁻¹ at U ≈ 2.3–2.5 V (organic electrolytes), and at the order of 100 kJ kg⁻¹ at voltages close to 4 V (ionic liquids as electrolytes). The real device consists of porous electrodes and a separator, both soaked with the electrolyte, as well as current collectors. Consequently, the maximum electric capacity expressed versus the mass of the device (ca. 20–30 F g⁻¹), is much smaller than the corresponding value expressed versus the mass of the carbon material (ca. 300 F g⁻¹). In order to obtain the energy density of the device at a level of 100 kJ kg⁻¹ (characteristic for the lead-acid battery), the capacitor with porous carbon electrodes should operate at voltages of ca. 4 V (ionic liquids as electrolytes). However, the specific power density of such a capacitor having an acceptable energy density (ca. 100 kJ kg⁻¹) is relatively low (ca. 1 kW kg⁻¹).     

Examination of the inflammatory response following implantation of titanium plates coated with phospholipids in rats

Implantation of biomaterials like titanium (Ti) causes inflammatory reactions possibly affecting implant functionality. Surface modifications could improve biocompatibility and functionality of implants. Biomembrane-derived phospholipids might be useful as implant coating due to their biomimetic properties. In vitro studies demonstrated beneficial effects for 2-oleoyl-1-palmitoyl-sn-glycero-3-phosphoethanolamin (POPE) as coating regarding interactions with cells and bacteria. Therefore, this in vivo study aimed at examining local inflammatory reactions after implantation of POPE-coated Ti plates. Ti implants with POPE attached non-covalently or covalent via octadecylphosphonic acid (OPA), with OPA alone and uncoated controls were simultaneously implanted intramuscularly in rats for 7, 14 and 56 days. The peri-implant tissue was quantitatively analyzed by immunohistochemistry for total macrophages, tissue macrophages, T cells, antigen-presenting cells and proliferating cells. Overall, both POPE-coated series were comparable to the controls. Furthermore, no differences were found between POPE coating on a covalently linked OPA monolayer and POPE coating dried from solution. Together with earlier in vitro results, this demonstrates the potential of phospholipids for implant surface modification.     

Dose levels of the occupational radiation exposures in Poland based on results from the accredited dosimetry service at the IFJ PAN, Krakow

Individual dosimetry service based on thermoluminescence (TLD) detectors has started its activity at the Institute of Nuclear Physics (IFJ) in Krakow in 1965. In 2002, the new Laboratory of Individual and Environment Dosimetry (Polish acronym LADIS) was established and underwent the accreditation according to the EN-PN-ISO/IEC 17025 standard. Nowadays, the service is based on the worldwide known standard thermoluminescent detectors MTS-N (LiF:Mg,Ti) and MCP-N (LiF:Mg,Cu,P), developed at IFJ, processed in automatic thermoluminescent DOSACUS or RE2000 (Rados Oy, Finland) readers. Laboratory provides individual monitoring in terms of personal dose equivalent H(p)(10) and H(p)(0.07) in photon and neutron fields, over the range from 0.1 mSv to 1 Sv, and environmental dosimetry in terms of air kerma K(a) over the range from 30 μGy to 1 Gy and also ambient dose equivalent H*(10) over the range from 30 μSv to 1 Sv. Dosimetric service is currently performed for ca. 3200 institutions from Poland and abroad, monitored on quarterly and monthly basis. The goal of this paper is to identify the main activities leading to the highest radiation exposures in Poland. The paper presents the results of statistical evaluation of ～ 100,000 quarterly H(p)(10) and K(a) measurements performed between 2002 and 2009. Sixty-five per cent up to 90 % of all individual doses in Poland are on the level of natural radiation background. The dose levels between 0.1 and 5 mSv per quarter are the most frequent in nuclear medicine, veterinary and industrial radiography sectors.     

Effects of cyclic lipodepsipeptide structural modulation on stability, antibacterial activity, and human cell toxicity

Bacterial infections are becoming increasingly difficult to treat due to the development and spread of antibiotic resistance. Therefore, identifying novel antibacterial targets and new antibacterial agents capable of treating infections by drug-resistant bacteria is of vital importance. The structurally simple yet potent fusaricidin or LI-F class of natural products represents a particularly attractive source of candidates for the development of new antibacterial agents. We synthesized 18 fusaricidin/LI-F analogues and investigated the effects of structure modification on their conformation, serum stability, antibacterial activity, and toxicity toward human cells. Our findings show that substitution of an ester bond in depsipeptides with an amide bond may afford equally potent analogues with improved stability and greatly decreased cytotoxicity. The lower overall hydrophobicity/amphiphilicity of amide analogues in comparison with their parent depsipeptides, as indicated by HPLC retention times, may explain the dissociation of antibacterial activity and human cell cytotoxicity. These results indicate that amide analogues may have significant advantages over fusaricidin/LI-F natural products and their depsipeptide analogues as lead structures for the development of new antibacterial agents.     

Cell motility, morphology, viability and proliferation in response to nanotopography on silicon black

Knowledge of cells' interactions with nanostructured materials is fundamental for bio-nanotechnology. We present results for how individual mouse fibroblasts from cell line NIH3T3 respond to highly spiked surfaces of silicon black that were fabricated by maskless reactive ion etching (RIE). We did standard measurements of cell viability, proliferation, and morphology on various surfaces. We also analyzed the motility of cells on the same surfaces, as recorded in time lapse movies of sparsely populated cell cultures. We find that motility and morphology vary strongly with nano-patterns, while viability and proliferation show little dependence on substrate type. We conclude that motility analysis can show a wide range of cell responses e.g. over a factor of two in cell speed to different nano-topographies, where standard assays, such as viability or proliferation, in the tested cases show much less variation of the order 10-20%.     

Conventional and Multiscale Modeling of Microstructure Evolution During Laminar Cooling of DP Steel Strips

Physical and numerical simulations of the hot rolling and laminar cooling of DP steel strips are presented in the paper. The objectives of the paper were twofold. Physical simulations of hot plastic deformation were used to identify and validate numerical models. Validated models were applied to simulate the manufacturing of DP steel strips. Conventional flow stress model and microstructure evolution model were used in the hot deformation part. The approach to the complex systems analysis based on global thermodynamic characterization and detailed microstructure characterization was applied to determine equilibrium state at various temperatures. Finally, two numerical models were used to simulate kinetics of austenite decomposition at varying temperatures: the first, conventional model based on the Avrami equation, and the second, the discrete Cellular Automata approach. Plastometric tests and stress relaxation tests were used for identification of the hot rolling model for the DP steel. Dilatometric tests were performed to identify the phase transformation models. Verification confirmed good accuracy of all models. Validated models were applied to simulate the manufacturing of DP steel strips. Influence of technological parameters (e.g., strip thickness and velocity, active sections in the laminar cooling, and water flux in the sections) on the DP microstructure was analyzed. The cooling schedules, which give required microstructures were proposed. The numerical tool, which simulates manufacturing chain for DP steel strips is the main output of the paper.     

Evaluating tear clearance rate with optical coherence tomography

Purpose

To assess the early-phase of tear clearance rate (TCR) with anterior segment optical coherence tomography (OCT) and to determine the association between TCR and other clinical measures of the tear film in a group of young subjects with different levels of tear film quality.