New Poly(N-isopropylacrylamide-butylacrylate) Copolymer Biointerfaces and Their Characteristic Influence on Cell Behavior In Vitro

Designing and obtaining new synthetic smart biointerfaces with specific and controlled characteristics relevant for applications in biomedical and bioengineering domains represents one of the main challenges in these fields. In this work, Matrix-Assisted Pulsed Laser Evaporation (MAPLE) is used to obtain synthetic biointerfaces of poly(N-isopropyl acrylamide-butyl acrylate) p(NIPAM-BA) copolymer with different characteristics (i.e., roughness, porosity, wettability), and their effect on normal HEK 293 T and murine melanoma B16-F1 cells is studied. For this, the influence of various solvents (chloroform, dimethylsulfoxide, water) and fluence variation (250–450 mJ/cm²) on the morphological, roughness, wettability, and physico–chemical characteristics of the coatings are evaluated by atomic force microscopy, scanning electron microscopy, contact angle measurements, Fourier-transform-IR spectroscopy, and X-ray photoelectron spectroscopy. Coatings obtained by the spin coating method are used for reference. No significant alteration in the chemistry of the surfaces is observed for the coatings obtained by both methods. All p(NIPAM-BA) coatings show hydrophilic character, with the exception of those obtained with chloroform at 250 mJ/cm². The surface morphology is shown to depend on both solvent type and laser fluence and it ranges from smooth surfaces to rough and porous ones. Physico–chemical and biological analysis reveal that the MAPLE deposition method with fluences of 350–450 mJ/cm² when using DMSO solvent is more appropriate for bioengineering applications due to the surface characteristics (i.e., pore presence) and to the good compatibility with normal cells and cytotoxicity against melanoma cells.     

Impact strength elastomer composites based on polystyrene components separated from waste electrical and electronic equipment

The reuse of plastic components of waste electrical and electronic equipment (WEEE) is an important concern both for environmental issues and to preserve the material resources, with minimum energy consumption. Considering that polystyrene fraction was reported as approximate 80% of the total amount of WEEE plastic, this article aims to evaluate the recycling of this fraction, without separation by components, by melt compounding with styrene-butadiene block-copolymer (SBS) and hydrogenated and maleinized SBS, the blend of the two elastomers acting both as an impact modifier and compatibilizer. The composites are characterized by mechanical analysis, impact tests, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction. The recycling conditions of the polystyrene fraction as composites without eliminating the WEEE additives for improved UV and flame resistance, with physical mechanical properties comparable to those of high-impact polystyrene resulted from the study. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48329.     

DNA interaction of the CcrM DNA methyltransferase: a mutational and modeling study

Caulobacter crescentus CcrM is a DNA-(adenine N6)-methyltransferase that methylates adenine in the sequence GANTC with high specificity. To investigate its mechanism of DNA recognition, we used the crystal structure of a related methyltransferase (M1.MboII, which modifies GAAGA) as a starting point, and docked into it a DNA substrate to identify the protein regions that approach the DNA. After alignment of CcrM and M1.MboII, we identified four candidate regions in CcrM to contain residues involved in DNA recognition. We mutated 20 amino acid residues within these regions, purified the CcrM variants, and determined their DNA-binding and catalytic activity on a cognate GANTC substrate and on nine near-cognate substrates, each of which contained a single base-pair substitution in the recognition sequence. Altogether, we identified four residues in two of the regions, mutations of which resulted in a strong (>100-fold) reduction of methylation activity. Our data show that DNA recognition by CcrM is a cooperative process, because disruption of critical contacts led to loss of catalytic activity but not to a relaxation in specificity. In addition, we identified a change in the readout of the fifth base pair in the GANTC sequence with two other CcrM variants that showed smaller reductions in overall activity. Based on this and the sequence alignment of CcrM with other DNA methyltransferases of same or related recognition sequence, we propose roles for these two regions in DNA recognition by CcrM.     

Comparitive study on facilitated pertraction of succinic acid using TRI‐n‐octylamine without and with 1‐octanol

Succinic acid has been pertracted with TOA using free liquid membranes without or with 1‐octanol. The addition of the alcohol led to the increase of up to 2.8–3 times of the acid's initial and final mass flows. At the same time, the influence of 1‐octanol on the transport capacity of the pertraction system was negative, its addition inducing the accumulation of succinic acid into the liquid membrane. A mathematical model describing the acid accumulation inside the liquid membrane has been developed for pertraction systems without and with 1‐octanol and offers good concordance with the experimental data. © 2012 Canadian Society for Chemical Engineering     

Total and individual carotenoids and phenolic acids content in fresh,refrigerated and processed spinach (Spinacia oleracea L.)

The carotenoid and phenolic acid contents in fresh, stored and processed (blanched, frozen and boiled) spinach were comparatively determined by spectrophotometric and HPLC analyses. The major carotenoids identified after HPLC analysis in saponified samples were lutein (37–53 μg/kg), β-carotene (18–31 μg/kg), violaxanthin (9–23 μg/kg) and neoxanthin (10–22 μg/kg). These carotenoids were all affected by storage and/or heating. The content of carotenoids was best preserved after storage for one day at 4 °C.     

The estimation of corrosion behaviour of ZrTi binary alloys for dental applications using electrochemical techniques

Titanium and zirconium are in the same group in the periodic table of elements and are known to have similar physical and chemical properties. Both Ti and Zr usually have their surfaces covered by a thin oxide film spontaneously formed in air. However, the cytotoxicity of ZrO₂ is lower than that of TiO₂ rutile. Treatments with fluoride are known as the main methods to prevent plaque formation and dental caries. The corrosion behaviour of ZrTi alloys with Ti contents of 5, 25 and 45 wt.% and cp-Ti was investigated for dental applications. All samples were tested by linear potentiodynamic polarisation and electrochemical impedance spectroscopy (EIS) performed in artificial saliva with different pH levels (5.6 and 3.4) and different fluoride (1000 ppm F⁻) and albumin protein (0.6%) contents. In addition, scanning electron microscopy (SEM) was employed to observe the surface morphology of the test materials after linear potentiodynamic polarisation. The corrosion current densities for the ZrTi alloys increased with the titanium content. The Zr5Ti and Zr25Ti alloys were susceptible to localised corrosion. The role that Ti plays as an alloying element is that of increasing the resistance of ZrTi alloy to localised corrosion. The presence of 0.6% albumin protein in fluoridated acidified artificial saliva with 1000 ppm F⁻ could protect the cp-Ti and ZrTi alloys from attack by fluoride ions.     

Synthesis and properties of ZnS nanoparticles by solvothermal and pyrolysis routes using the Zn dithiocarbamate complex as novel single source precursor

In this work, the synthesis and characterization of ZnS nanoparticles prepared via two approaches, involving the thermal decomposition of the precursor complex in a furnace (pyrolysis) and by solvothermal process in the presence of hexadecylamine (HDA-ZnS), are reported. The precursor complex, Zinc (II) bis (N,N-diallyl dithiocarbamate), was synthesized and characterized by spectroscopic and single-crystal X-ray techniques. The spectroscopic analyses of the complex indicated a symmetrical bidentate coordination of the dithio ligand through the S-atoms. The single-crystal X-ray structure revealed a distorted square pyramidal coordinate geometry with S atoms around the Zn ion. The optical properties and the morphology of the as-prepared nanoparticles were studied by UV-Vis and photoluminescense spectroscopy, and transmission electron microscopy (TEM), respectively. HDA-ZnS are spherical and monodispersed with an average size of 4.5?nm, as estimated from the optical absorption spectrum and the TEM image. The ZnS nanoparticles obtained via pyrolysis in a furnace yielded the hexagonal wurtzite phase, whereas the HDA-ZnS nanoparticles showed a mixture of wurtzite and cubic phase with the cubic phase being dominant.     

Goal consensus and collaboration.

There are differences in the extent to which patient and therapist agree on psychotherapy goals and work together in the helping relationship. This article reviews the empirical research on the relation between psychotherapy outcome and patient-therapist goal consensus and collaboration. Research results suggest that psychotherapy outcome is enhanced when agreement on therapeutic goals and collaborative involvement (often assessed by patient cooperation, role involvement, and homework compliance) are present during the course of therapy. When therapists and patients demonstrate cooperative and affiliative behavior, and when patients are actively involved in the patient role, better outcomes can be expected. We discuss therapeutic practices based on these findings, emphasizing the involvement of therapist and patient in a process of shared decision-making where goals are frequently discussed and agreed upon. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Doctoral training issues in school and clinical child psychology.

Do clinical child and school psychologists feel that broadening their training to include aspects of other professional child psychology specialties would enable better service provision to their clients? Do they feel that children, adolescents, and families would be better served if the 2 specialties were merged? An exploratory questionnaire was sent to a random sample of 300 members of American Psychological Association (APA) Division 16 (School Psychology) and a random sample of 300 members from APA Division 12 (Clinical), Section 1 (Clinical Child). Implications from their responses for training of psychology health service providers to children and families are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)