Rheology and Oxidative Stability of Whey Protein Isolate-Stabilized Menhaden Oil-in-Water Emulsions as a Function of Heat Treatment

ABSTRACT:  Menhaden oil-in-water emulsions (20%, v/v) were stabilized by 2 wt% whey protein isolate (WPI) with 0.2 wt% xanthan gum (XG) in the presence of 10 mM CaCl₂ and 200 μM EDTA at pH 7. Droplet size, lipid oxidation, and rheological properties of the emulsions were investigated as a function of heating temperature and time. During heating, droplet size reached a maximum at 70 °C and then decreased at 90 °C, which can be attributed to both heating effect on increased hydrophobic attractions and the influence of CaCl₂ on decreased electrostatic repulsions. Combination of effects of EDTA and heat treatment contributed to oxidative stability of the heated emulsions. The rheological data indicate that the WPI/XG-stabilized emulsions undergo a state transition from being viscous like to an elastic like upon substantial thermal treatment. Heating below 70 °C or for less than 10 min at 70 °C favors droplet aggregation while heating at 90 °C or for 15 min or longer at 70 °C facilitates WPI adsorption and rearrangement. WPI adsorption leads to the formation of protein network around the droplet surface, which promotes oxidative stability of menhaden oil. Heating also aggravates thermodynamic incompatibility between XG and WPI, which contributes to droplet aggregation and the accumulation of more WPI around the droplet surfaces as well.     

Enhanced fluoride sorption by mechanochemically activated kaolinites

This study investigated the surface modification of photocatalyst and photodecomposition of formaldehyde from indoor pollution source. This study explored the feasibility of the application of the ultraviolet light emitting diode (UVLED) instead of the traditional ultraviolet (UV) lamp to treat the formaldehyde. The photocatalytic decomposition of formaldehyde at various initial concentrations was elucidated according to the Langmuir–Hinshelwood model. The reaction rate constant (k) and adsorption equilibrium constant (K_L) over 0.334 g silver titanium oxide photocatalyst (Ag/TiO₂) coated on glass sticks with 254 nm ultraviolet lamp (UVC), 365 nm ultraviolet lamp (UVA), and UVLED are 650 ppmv min⁻¹ and 2 × 10⁻⁴ ppmv⁻¹, 500 ppmv min⁻¹ and 1.04 × 10⁻⁴ ppmv⁻¹, and 600 ppmv min⁻¹ and 2.52 × 10⁻⁵ ppmv⁻¹, respectively. A comparison of the simulation results with the experimental data was also made, indicating good agreement. The magnitudes of energy effectiveness (E_e) are in the order of UVLED (0.6942 mg kW⁻¹ h⁻¹) > UVA (0.007 mg kW⁻¹ h⁻¹) > UVC (0.0053 mg kW⁻¹ h⁻¹). The E_e of UVLED is 131 times larger than that of UVC. The UVLED can save a lot of energy in comparison with the traditional UV lamps. Thus, this study showed the feasible and potential use of UVLED in photocatalysis.     

Gelling properties of gelatin–xanthan gum systems with high levels of co-solutes

The effects of moisture content, xanthan gum (XG) addition and glucose syrup (GS):sucrose ratio on elastic (G′) and viscous (G″) moduli during in situ gelation and on large deformation rheological properties of cured gels were investigated. An increase in both moduli of the samples with XG addition indicates network structure being strengthened. All gel samples exhibited distinct fracture. An increase in GS:sucrose ratio led to a decrease in fracture stress and an increase in fracture strain, implying more flexible polymer network. Decreasing moisture content may lead to phase separation between sugar-rich and polymer-rich phases to form stronger connection within the network structure. Textural characteristics of samples analyzed using a texture map, indicated that increasing GS:sucrose ratio rendered the sample texture more rubbery when the samples contained XG. We also related factors affecting the gelling mechanisms in terms of T_g measured by different techniques including DMA and modulated DSC.     

Influence of SiC Particles on Mechanical and Microstructural Properties of Modified Interlock Friction Stir Weld Lap Joint for Automotive Grade Aluminium Alloy

Silicon - The present requirement of the aerospace industry is seeking light-weight joining material that satisfies the technical and technological requirements with better mechanical...     

Effect of Silica Content on Mechanical and Microstructure Behaviour of Resistance Spot Welded Advanced Automotive TRIP Steels

Silicon - This research investigates the effect of SiC wt% on mechanical and microstructure behavior of transformation induced plasticity (TRIP) 780 steels by resistance spot welding. The...     

Twisted Crystalline Organic Semiconductor Photodetectors

Optoelectronic properties of anisotropic crystals vary with direction requiring that the orientation of molecular organic semiconductor crystals is controlled in optoelectronic device active layers to achieve optimal performance. Here, a generalizable strategy to introduce periodic variations in the out-of-plane orientations of 5,11-bis(triisopropylsilylethynyl)anthradithiophene (TIPS ADT) crystals is presented. TIPS ADT crystallized from the melt in the presence of 16 wt.% polyethylene (PE) forms banded spherulites of crystalline fibrils that twist in concert about the radial growth direction. These spherulites exhibit band-dependent light absorption, photoluminescence, and Raman scattering depending on the local orientation of crystals. Mueller matrix imaging reveals strong circular extinction (CE), with TIPS ADT banded spherulites exhibiting domains of positive or negative CE signal depending on the crystal twisting sense. Furthermore, orientation-dependent enhancement in charge injection and extraction in films of twisted TIPS ADT crystals compared to films of straight crystals is visualized in local conductive atomic force microscopy maps. This enhancement leads to 3.3- and 6.2-times larger photocurrents and external quantum efficiencies, respectively, in photodetectors comprising twisted crystals than those comprising straight crystals.     

Study of an Explosive-Driven Metal Plate

Equation of motion of an incompressible metal plate, accelerated by a plane detonation wave, has been solved for a general value of adiabatic exponent ß of detonation products to investigate its effect on terminal velocity of the plate. It has been found that the plate velocity increases with decreasing value of ß. The magnitude of this effect has been found sufficient to determine adiabatic exponent of detonation products from the measurement of flyer plate velocities at different C/M ratios. Velocities of metal plates, hurled by contact explosion of high density explosives, have also been measured with oscillographic technique by using an experimental setup which is insensitive to air shocks. The plate velocities measured by such an experimental setup have been found in good agreement with theoretical ones.