Comments on “Necessary and sufficient stability condition of fractional-order interval linear systems” [Automatica 44 (2008), 2985–2988]

This paper shows that the main thesis of the article “Necessary and sufficient stability condition of fractional-order interval linear systems” by Ahn and Chen (Automatica, vol. 44, pp. 2985–2988) is only a sufficient (and not a necessary) condition for the robust stability of fractional-order linear systems.     

Production of nanoparticles of copper compounds by anodic dissolution of copper in organic solvents

The anodic behaviour of copper was investigated in ethanol solution containing LiClO₄, LiCl electrolyte and water. The type of electrolyte and the water content influences the mechanism of the anodic process and the formation of anodic products. In LiClO₄ electrolyte the dissolution of copper is related to the oxidation of Cu(I) to Cu(II). In solutions of LiCl the etching of copper begins with the creation of soluble complexes of Cu(I) with chloride ions and solvent molecules. At potentials above 0.4 V the formation of alkoxides was observed in both solutions, characterized by a yellow tint. On the other hand, above 0.8 V (i.e. above the equilibrium potential of alcohol oxidation) copper dissolution is accompanied by the formation of a blue colloidal suspension of Cu (II) copper salt. Anodic etching of copper in solutions containing 3% H₂O at potentials higher than 0.4 V leads to the formation of colloidal suspension of copper oxide nanoparticles.     

Dyes based on the 2(1H)‐quinolone skeleton as potential colorimetric and fluorescent sensors for cyanide anions

The sensing properties of dyes based on 2(1H) quinolones containing dicyanoethylene groups towards selected anions such as CN^?, F^?, I^?, Cl^?, SCN^?, CH₃COO^?, and were evaluated. The spectroscopic responses of these compounds were investigated in a solution of acetonitrile/water (1:9, v/v) and phosphate buffer at a pH of 7.4. These dyes were found to act as efficient colorimetric and high turn–off fluorescent sensors to cyanide anions. The fluorescence intensity was linearly related to the concentration of CN^? from 1 to 10 µmol/L, and the detection limits reached a micromolar level of 6.7, 11.1, 3.8 and 7.2 µmol/L for 1‐4 , respectively. The cytotoxic effect of the dyes against human neuroblastoma cells (SH‐SY5Y) was also determined by MTT assay. The examined compounds exhibited slight cytotoxicity against cells under experimental conditions.     

Seed Selection for Spread of Influence in Social Networks: Temporal vs. Static Approach

The problem of finding optimal set of users for influencing others in the social network has been widely studied. Because it is NP-hard, some heuristics were proposed to find sub-optimal solutions. Still, one of the commonly used assumption is the one that seeds are chosen on the static network, not the dynamic one. This static approach is in fact far from the real-world networks, where new nodes may appear and old ones dynamically disappear in course of time. The main purpose of this paper is to analyse how the results of one of the typical models for spread of influence - linear threshold - differ depending on the strategy of building the social network used later for choosing seeds. To show the impact of network creation strategy on the final number of influenced nodes - outcome of spread of influence, the results for three approaches were studied: one static and two temporal with different granularities, i.e. various number of time windows. Social networks for each time window encapsulated dynamic changes in the network structure. Calculation of various node structural measures like degree or betweenness respected these changes by means of forgetting mechanism - more recent data had greater influence on node measure values. These measures were, in turn, used for node ranking and their selection for seeding. All concepts were applied to experimental verification on five real datasets. The results revealed that temporal approach is always better than static and the higher granularity in the temporal social network while seeding, the more finally influenced nodes. Additionally, outdegree measure with exponential forgetting typically outperformed other time-dependent structural measures, if used for seed candidate ranking.     

Selective catalytic transformations of methanol to C2-C3 hydrocarbons over the new zeolite type LZ 132

The small pore zeolite HLZ 132 exhibits, in comparison with other zeolites, an increased selectivity for the transformation of methanol to ethylene in the reaction temperature range 350–500 °C: the weight ratio of C₂H₄ to C₃H₆ in the products ranges between 1 and 4 at WHSV=2 h^–1. Besides the effect of the reactant shape selectivity this fact may be interpreted by the participation of the asymmetrical methoxy groups in the surface as well as by proton-donor centres of lower acidity which do not catalyze the oligomerization of ethylene but which do the more basic molecule of propylene, thereby generating polyene-type coke.     

Protective properties of organic phosphate-pigmented coatings on phosphated steel substrates

Investigations have been carried out on properties of coatings, differing by their pigmentation and binder, and applied on different chemical pre-treatments of the steel surface. Paints based on alkyd and alkyd-melamine binders, pigmented with zinc phosphate and modified basic zinc phosphate were applied on amorphous and crystalline phosphated steel surface and, for the comparison purpose, on degreased steel surface. The effect of the binder, the pigment and the pre-treatment of the steel surface on the protective properties of the coatings were determined by measurements of adhesion, water absorption and water permeability and by results obtained in salt spray and Prohesion tests. Coatings based on alkyd binder show a lower damage degree and good retention of adhesion in corrosion conditions, in spite of a higher water absorption and water permeability and a lower initial adhesive strength. Protective properties of coatings have been found to be highly dependent upon the substrate pre-treatment. Chemical pre-treatment of the steel substrate increases the protective properties of the system, which is particularly evident in the case of crystalline phosphating and the coating pigmented with modified basic zinc phosphate. This phenomenon can be explained by the synergism between this phosphate pigment with crystalline phosphate layer.     

Quality assessment for a visual and automatic license plate recognition

Video transmission and analysis is often utilized in applications outside of the entertainment sector, and generally speaking this class of video is used to perform specific tasks. Examples of these applications include security and public safety. The Quality of Experience (QoE) concept for video content used for entertainment differs significantly from the QoE of surveillance video used for recognition tasks. This is because, in the latter case, the subjective satisfaction of the user depends on achieving a given functionality. Recognizing the growing importance of video in delivering a range of public safety services, we focused on developing critical quality thresholds in license plate recognition tasks based on videos streamed in constrained networking conditions. Since the number of surveillance cameras is still growing it is obvious that automatic systems will be used to do the tasks. Therefore, the presented research includes also analysis of automatic recognition algorithms.