Effect of Ca2+ and Mg2+ ions on the sintering and spectroscopic properties of cr-doped yttrium aluminum garnet ceramics

In this work, we investigated the effects of Ca²⁺ and Mg²⁺ ions and annealing temperature on the spectroscopic parameters of chromium-doped yttrium aluminum garnet ceramics (Cr:YAG). Samples were obtained with either a separate or a simultaneous addition of calcium and magnesium oxides. To achieve this, aqueous suspensions were prepared using Y₂O₃, Al₂O₃, Cr₂O₃, MgO, and CaO high-purity powders as raw materials. The obtained suspensions were freeze-granulated, pressed into pellets, debinded, and subjected to reactive sintering in vacuum at 1715°C for 6 h. Each material was annealed in air with temperatures between 1300 and 1700°C. Samples were also compared to Cr:YAG ceramics with the addition of silica as a sintering aid. All the materials obtained were then exposed to 445 nm excitation, and emission spectra in the visible and infrared wavelengths were recorded. The results showed that the emission spectra of Cr:YAG ceramics varied according to the annealing conditions: as-sintered samples exhibited strong emissions of around 680 nm and, after air annealing, of around 1400 nm. This phenomenon is attributed to the Cr³⁺→Cr⁴⁺ transition. Samples doped solely with MgO exhibited the highest emission intensity in the infrared region. Thus, Mg²⁺ ions provided the best conversion efficiency of chromium ions.     

Further study on the one-pot synthesis of (E)-2-nonenal from castor oil

A one-step procedure is described for the synthesis of (E)-2-nonenal from commercial castor oil by ozonolysis in methanol, followed by reduction of the ozonide products with dimethyl sulfide and exposure of the resulting intermediate product to dilute sulfuric acid. The developed process allows the production of the aldehyde with a yield of 80% at a purity of 95%. The method has advantages over all those reported earlier, because of inexpensive raw material and reducing agent, recycling of the solvent and its unusual simplicity.     

Isolation and amino acid sequence of a serine proteinase inhibitor from common flax (Linum usitatissimum) seeds

LUTI (Linum usitatissimum trypsin inhibitor), a member of the potato inhibitor I family, has been isolated from seeds of flax by ethanol fractionation, ion exchange chromatography on CM-Sephadex C-25, affinity purification on immobilized methylchymotrypsin (alpha-chymotrypsin in which His57 has been converted to 3-methylhistidine) in the presence of 5M NaCl, and finally by reversed-phase HPLC. The 7655 Da inhibitor consists of a single polypeptide chain of 69 residues with one disulfide bridge. The molecule is acetylated at the N terminus. Its primary structure has been determined after limited proteolysis of the native molecule with trypsin at the reactive site, cleavage with cyanogen bromide or arginyl endopeptidase (Arg-gingipain), and alcoholytic deacetylation of the N-terminally blocked serine. The association constants (K(a)) of LUTI with bovine beta-trypsin and alpha-chymotrypsin are 3.58x10(10) M(-1) and 5.02x10(5) M(-1), respectively. High NaCl concentration (3M) increased the association constant of LUTI with alpha-chymotrypsin to 6.64x10(7) M(-1). To our knowledge, LUTI is the first serine-proteinase-type inhibitor isolated from a plant of the Linaceae family.     

Morphology and thermal properties of two polymethacrylates modified by a polymer liquid crystal

We have studied blends of a polymer liquid crystal (PLC) with poly(cyclohexylethyl methacrylate) (PCHEMA) or poly(cyclohexylpropyl methacrylate) (PCHPMA). The PLC is PET/0.6PHB where PET = poly(ethylene terephthalate), PHB = p-hydroxybenzoic acid and 0.6 is the mole fraction of the latter in the copolymer. The microstructure was studied by scanning electron microscopy (SEM). PCHEMA + PLC (20 wt% of the latter, blend E) has a fine texture with LC islands evenly distributed in the matrix and good adhesion between the phases resulting from their partial miscibility. The PCHPMA + PLC (20 wt% of the latter, blend P) shows only limited compatibility. The SEM results are confirmed by values of the glass transition temperatures T_g determined via thermal mechanical analysis. The T_g value of the blend E is shifted towards the T_g of PLC; T_g of blend P is practically equal to that of PCHPMA. The linear isobaric expansivity α_L values for both blends are lower than the respective values for pure PCHPMA and PCHEMA. Thermal stabilities of the blends determined by thermogravimetry are also better than those of pure polymethacrylates. The temperature of 50% weight degradation for blend E is higher than that for pure PCHEMA by more than 60 K Copyright © 2004 Society of Chemical Industry     

CR composites with improved processing safety crosslinked via Heck's reaction

The aim of this study was to optimize the composition of the chloroprene rubber (CR) composites crosslinked via the Heck-type reaction to ensure their safe processing at elevated temperature. The developed curing system consisting of iron (III) acetylacetonate (Fe(acac)) and triethanolamine (TEOA) demonstrates high activity and more eco-friendly composition in comparison with metal oxide system, commercially used for CR crosslinking. However, the high activity of Fe(acac)/TEOA system results in a short scorch time, which is the greatest disadvantage regarding the safe processing of CR rubber and thus, must be improved. Therefore, CR compounds with Fe(acac) in the presence of different additives were studied. The longest scorch times (t₀₂) were observed for rubber compounds with urotropine (U), N-cyclohexyl-2-benzothiazole sulfenamide (CBS) or salicylic acid. Moreover, vulcanizates containing these additives exhibited higher tensile strengths and elongation at breaks compared to CR crosslinked with Fe(acac)/TEOA system.     

Transport of reactants during scale formation on copper in SO2+O2 atmosphere at 973 and 1073 K

The reaction between copper and a mixture of SO₂+O₂ was studied at 973 and 1073 K. The experimental methods included optical microscopy, X-ray diffraction, scanning electron microscopy (SEM), energy-dispersive X-ray analysis, and radiotracer. It is concluded that the inward transport of oxidants through the scale as well as oxygen and sulfur dioxide liberation in the reactions taking place at phase boundaries suggest that secondary processes occur inside the oxide-sulphate layer. Therefore, Cu₂O and CuOCuSO₄ appear inside this layer. In the metal-consumption zone, a Cu₂O layer forms, which contains small amounts of a sulfide phase near the metal-scale interface.     

Microfluidic device with dual-channel fluorescence acquisition for quantification/identification of cancer cells

This paper presents an optofluidic device for cell discrimination with two independent interrogation regions. Pumping light is coupled to the device, and cell fluorescence is extracted from the two interrogation zones by using optical fibers embedded in the optofluidic chip. To test the reliability of this device, AU-565 cells—expressing EpCAM and HER2 receptors—and RAMOS cells were mixed in a controlled manner, confined inside a hydrodynamic focused flow in the microfluidic chip and detected individually so that they could be discriminated as positive (signal reception from fluorescently labeled antibodies from the AU-565 cells) or negative events (RAMOS cells). A correlation analysis of the two signals reduces the influence of noise on the overall data.     

Iron enhances generation of fibrin fibers in human blood: Implications for pathogenesis of stroke

Stroke is associated with the intracerebral formation of fibrin clots which may lead to irreversible brain damage. Thrombolytic therapies employ a variety of natural and/or recombinant plasminogen activators to initiate fibrinolytic degradation of cerebral thrombi. However, such therapies when installed beyond 4‐ to 6‐h window, may fail to achieve the expected outcome. This is due to the hydroxyl radical‐induced modification of fibrin(ogen) molecules rendering them refractory to fibrinolytic degradation, but no cause of the increased free radical generation in stroke was offered. Here, we show by means of electron microscopy that iron ions added to human blood dramatically enhances fibrin fibers formation with thrombin, and significantly delays fibrinolysis during spontaneous clotting of native blood. Iron ions caused the appearance dense matted fibrin deposits, similar, if not identical, to those observed in plasma of patients with stroke. These results may explain a known relationship between thrombotic diseases and the increased body concentrations of free iron and/or hemoglobin derivatives. We conclude that any action resulting in the inhibition of hemostatic abnormalities, as well as in the reduction of body free iron and scavenging of hydroxyl radicals (e.g., by polyphenols) can potentially prevent pathological reactions associated with consequences of stroke. Microsc. Res. Tech. 75:1185–1190, 2012. © 2012 Wiley Periodicals, Inc.