Factors affecting the potentiometric response of all-solid-state solvent polymeric membrane calcium-selective electrode for low-level measurements

An all-solid-state calcium-selective electrode was constructed with poly(pyrrole) solid-contact doped with calcium complexing ligand Tiron. The potentiometric response of this sensor can have a linear range down to 10(-)(9) M with a slope close to Nernstian and detection limit equal to 10(-)(9.6). The effects of pH and the activity of the interfering ion in the conditioning solution on the potentiometric behavior of the constructed sensors were examined. Potential stability, reproducibility, and impedance studies were performed. The selectivity of the constructed electrode is better than that of the conventional calcium-selective electrode with internal filling solution of 10(-)(2) M CaCl(2) and comparable to that of the best liquid-contact electrodes.     

Strong Negation and Equivalence in the Safe Belief Semantics

The safe belief semantics uses intermediate logics to definean extension of answer sets to all propositional formulas, butonly considering one kind of negation. In this work we extendsafe beliefs adding the strong negation connective. The mainfeature of our extension is that strong negation can occur beforeany formula, and not only at the atomic level. We give resultsconcerning the relation between strong negation extensions ofintermediate logics and safe beliefs and consider the way inwhich strong negation can be eliminated from any formula whilepreserving its semantics. We also propose two new notions ofequivalence: substitution equivalence and contextualized equivalence.We prove that they are both more general than strong equivalenceand, for propositional formulas where strong negation may occurat the non-atomic level, substitution equivalence captures anotion of equivalence that cannot be captured by strong equivalencealone.     

Impact of including land-use change emissions from biofuels on meeting GHG emissions reduction targets: the example of Ireland

The greenhouse gases (GHG) emissions from land-use change are of particular concern for land-based biofuels. Emissions avoided by substituting fossil fuels with biofuels may be offset by emissions from direct and indirect land-use changes (LUC). There is an urgent need to investigate what impact land-use change emissions may have on the expansion of bioenergy and biofuels, in the context of EU mitigation policies. This paper focuses on Ireland, which faces a number of challenges in delivering its renewable energy and GHG reduction targets. The Irish TIMES energy systems model was used to assess the impact of a range of land-use change emissions’ levels on the evolution of Ireland’s low-carbon energy system. A reference scenario was developed where LUC is ignored and Ireland achieves a least-cost low-carbon energy system by 2050. If high indirect land-use change (ILUC) emissions are included, this results in a decrease by 30 % in bioenergy and a 68 % increase in marginal abatement costs by 2050. Hydrogen is used instead of bioenergy in the freight sector in this scenario, while private cars are fuelled by renewable electricity. If GHG emissions from ILUC were considered less severe, indigenous grass biomethane becomes the key biofuel representing 31 % of total bioenergy consumption. This is in line with recent research in Ireland of the key role that grass biomethane can play.     

Synthesis and characterization of core–shell SiO2@(Er3+,Yb3+):Lu2O3

We synthesized crystalline Erbium Er³⁺ and Ytterbium Yb³⁺ codoped -Lu₂O₃ nanolayers on SiO₂ microspheres using the modified Pechini method. Two different kinds of precursors, nitrates and chlorides, have been used leading to a layer-to-layer morphology and necklaces structures, respectively. In both cases, the size of nanocrystallites constituting the optical active layer is around 5 nm. We performed X-ray powder diffraction to confirm the cubic crystalline structure of the sesquioxides layer. High resolution transmission electron microscopy analyses corroborate the crystalline nature of the layer. The optical emission of Er³⁺ in the visible range has been recorded.     

Diminazene Aceturate Stabilizes Atherosclerotic Plaque and Attenuates Hepatic Steatosis in apoE-Knockout Mice by Influencing Macrophages Polarization and Taurine Biosynthesis

Atherosclerosis and nonalcoholic fatty liver disease are leading causes of morbidity and mortality in the Western countries. The renin–angiotensin system (RAS) with its two main opposing effectors, i.e., angiotensin II (Ang II) and Ang-(1–7), is widely recognized as a major regulator of cardiovascular function and body metabolic processes. Angiotensin-converting enzyme 2 (ACE2) by breaking-down Ang II forms Ang-(1–7) and thus favors Ang-(1–7) actions. Therefore, the aim of our study was to comprehensively evaluate the influence of prolonged treatment with ACE2 activator, diminazene aceturate (DIZE) on the development of atherosclerotic lesions and hepatic steatosis in apoE^−/− mice fed a high-fat diet (HFD). We have shown that DIZE stabilized atherosclerotic lesions and attenuated hepatic steatosis in apoE^−/− mice fed an HFD. Such effects were associated with decreased total macrophages content and increased α-smooth muscle actin levels in atherosclerotic plaques. Moreover, DIZE changed polarization of macrophages towards increased amount of anti-inflammatory M2 macrophages in the atherosclerotic lesions. Interestingly, the anti-steatotic action of DIZE in the liver was related to the elevated levels of HDL in the plasma, decreased levels of triglycerides, and increased biosynthesis and concentration of taurine in the liver of apoE^−/− mice. However, exact molecular mechanisms of both anti-atherosclerotic and anti-steatotic actions of DIZE require further investigations.     

Application of the method of fundamental solutions and radial basis functions for inverse transient heat source problem

The paper considers the determination of heat sources in unsteady 2-D heat conduction problem. The determination of the strength of a heat source is achieved by using the boundary condition, initial condition and a known value of temperature in chosen points placed inside the domain. For the solution of the inverse problem of identification of the heat source the θ-method with the method of fundamental solution and radial basis functions is proposed. Due to ill conditioning of the inverse transient heat conduction problem the Tikhonov regularization method based on SVD decomposition was used. In order to determine the optimum value of the regularization parameter the L-curve criterion was used. For testing purposes of the proposed algorithm the 2-D inverse boundary-initial-value problems in square region Ω with the known analytical solutions are considered. The numerical results show that the proposed method is easy to implement and pretty accurate. Moreover the accuracy of the results does not depend on the value of the θ parameter and is greater in the case of the identification of the temperature field than in the case of the identification of the heat sources function.     

Improved capacitance characteristics during electrochemical charging of carbon nanotubes modified with polyoxometallate monolayers

By modification of surfaces of multi-walled carbon nanotubes with ultra-thin monolayer-type films of phosphododecamolybdic acid, H₃PMo₁₂O₄₀, an electrode material with improved capacitance properties is produced. It is apparent from three distinct test experiments (based on cyclic voltammetry, galavanostatic charging-discharging and AC impedance) that capacitors utilizing H₃PMo₁₂O₄₀-modified carbon nanotubes are characterized by specific capacitances and energy densities on the levels of 40 F g⁻¹ and 1.3 Wh kg⁻¹, whereas the respective values for the systems built from bare carbon nanotubes are lower, 22 F g⁻¹ and 0.7 Wh kg⁻¹. It is reasonable to expect that fast and reversible multi-electron transfers of the Keggin-type H₃PMo₁₂O₄₀ account for the pseudocapacitance effect and significantly contribute to the observed overall capacitance.     

Synthesis of MFI films on α-alumina at neutral pH

Oriented films of MFI were prepared on α-alumina substrates by a method including substrate seeding and subsequent growth of the seeds in a synthesis gel containing fluoride as mineralizing agent. The films were characterized by scanning electron microscopy and X-ray diffraction. The preparation procedure presented here is promising for the synthesis of highly siliceous MFI films on alumina substrates.     

Introducing a Semi-Coated Model to Investigate Antibacterial Effects of Biocompatible Polymers on Titanium Surfaces

Peri-implant infections from bacterial biofilms on artificial surfaces are a common threat to all medical implants. They are a handicap for the patient and can lead to implant failure or even life-threatening complications. New implant surfaces have to be developed to reduce biofilm formation and to improve the long-term prognosis of medical implants. The aim of this study was (1) to develop a new method to test the antibacterial efficacy of implant surfaces by direct surface contact and (2) to elucidate whether an innovative antimicrobial copolymer coating of 4-vinyl-N-hexylpyridinium bromide and dimethyl(2-methacryloyloxyethyl) phosphonate (VP:DMMEP 30:70) on titanium is able to reduce the attachment of bacteria prevalent in peri-implant infections. With a new in vitro model with semi-coated titanium discs, we were able to show a dramatic reduction in the adhesion of various pathogenic bacteria (Streptococcus sanguinis, Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis), completely independently of effects caused by soluble materials. In contrast, soft tissue cells (human gingival or dermis fibroblasts) were less affected by the same coating, despite a moderate reduction in initial adhesion of gingival fibroblasts. These data confirm the hypothesis that VP:DMMEP 30:70 is a promising antibacterial copolymer that may be of use in several clinical applications.