Does office space occupation matter? The role of the number of persons per enclosed office space,psychosocial work characteristics,and environmental satisfaction in the physical and mental health of employees

The study examined the effects of office space occupation, psychosocial work characteristics, and environmental satisfaction on physical and mental health of office workers in small‐sized and open‐plan offices as well as possible underlying mechanisms. Office space occupation was characterized as number of persons per one enclosed office space. A total of 207 office employees with similar jobs in offices with different space occupation were surveyed regarding their work situation (psychosocial work characteristics, satisfaction with privacy, acoustics, and control) and health (psychosomatic complaints, irritation, mental well‐being, and work ability). Binary logistic and linear regression analyses as well as bootstrapped mediation analyses were used to determine associations and underlying mechanisms. Employee health was significantly associated with all work characteristics. Psychosocial work stressors had the strongest relation to physical and mental health (OR range: 1.66–3.72). The effect of office space occupation on employee health was mediated by stressors and environmental satisfaction, but not by psychosocial work resources. As assumed by sociotechnical approaches, a higher number of persons per enclosed office space was associated with adverse health effects. However, the strongest associations were found with psychosocial work stressors. When revising office design, a holistic approach to work (re)design is needed.     

Dynamische Verformungsmessungen an Eisenbahnbrücken mittels Mikrowelleninterferometrie

Dynamic measurements of railway bridge displacements through microwave interferometry – Part 1: measurement method The microwave interferometry is a rather new measuring technique, yet little‐known in civil engineering applications. It allows the non‐contact acquisition of structural displacements with accuracy in the sub‐millimetre range at a sampling rate of up to 4 kHz. The high sampling frequency allows also the caption of dynamic structural responses, which can be used for a straightforward determination of the main modal parameters of the structures (natural frequencies, damping ratios). Furthermore, the synchronous acquisition of the overall motion of the targeted object is possible due to a high range resolution, which facilitates a direct identification of modal shapes. This paper gives a short introduction of the measurement method and outlines its boundary conditions and limitations with respect to applications in railway bridge dynamics. The knowledge has been gained on the basis of comprehensive systematic experimental investigations performed within the frame of a cooperation project with the German Railways (Deutsche Bahn AG). As a result an evaluation matrix was created, which clearly illustrates the applicability of the microwave interferometry for different railway‐specific tasks. The second part will present selected results of microwave interferometry measurements of railway bridges in comparison to parallel conventional measurements and the corresponding numerical investigations, which were used for the validation of the measurement technique.     

Invisible Agency

Jeremy Till and Tatjana Schneider call for a redefinition of the architect away from the professional who is ostensibly involved in adding ‘more stuff to the world’. Looking beyond the business of matter or managing the impact of that matter on the environment, they explore ways that designers can use their intelligence and creativity to shift existing habits of consumption and patterns of behaviour. They highlight the work for four practices who are already operating in this field: 2012Architecten, 00/:, Arif Hasan and Morar de Outras Maneiras (MOM).     

Probabilistic performance prediction model for Austrian torrent control infrastructure

Due to the growing stock of torrent control structures and decreasing investments, the protection level can be reduced in the long term. Therefore, the focus of the future investments has been shifted on efficiency improvement and maintenance of existing structures. The maintenance of the existing structures is necessary to ensure safety from natural hazards, which are increasing as a consequence of the climate change. Due to the increasing number of structures, there is a strong need to develop a good maintenance management for these infrastructure works. This study is based on data from the condition rating programme of the Austrian Service for Torrent and Avalanche Control. For the structures relevant in this work, 75,343 records were available. The data were examined for different construction type and construction materials. The reliability of the structures was determined by means of the Markov chain. The study describes a homogeneous Markov chain model formed by the data of the condition rating. The result of this study is a proposal for a time to failure (TTF) and a time to repair (TTR) for several construction types with different construction materials as well as the time-dependent use of construction materials in the sector of the Austrian torrent control infrastructure.     

How do breath and skin emissions impact indoor air chemistry?

People are an important source of pollution indoors, through activities such as cleaning, and also from “natural” emissions from breath and skin. This paper investigates natural emissions in high‐occupancy environments. Model simulations are performed for a school classroom during a typical summer in a polluted urban area. The results show that classroom occupants have a significant impact on indoor ozone, which increases from ~9 to ~20 ppb when the pupils leave for lunch and decreases to ~14 ppb when they return. The concentrations of 4‐OPA, formic acid, and acetic acid formed as oxidation products following skin emissions attained maximum concentrations of 0.8, 0.5, and 0.1 ppb, respectively, when pupils were present, increasing from near‐zero concentrations in their absence. For acetone, methanol, and ethanol from breath emissions, maximum concentrations were ~22.3, 6.6, and 21.5 ppb, respectively, compared to 7.4, 2.1, and 16.9 ppb in their absence. A rate of production analysis showed that occupancy reduced oxidant concentrations, while enhancing formation of nitrated organic compounds, owing to the chemistry that follows from increased aldehyde production. Occupancy also changes the peroxy radical composition, with those formed through isoprene oxidation becoming relatively more important, which also has consequences for subsequent oxidant concentrations.     

Computed tomography of cryogenic biological specimens based on X-ray microscopic images

Soft X-ray microscopy employs the photoelectric absorption contrast between water and protein in the 2.34-4.38 nm wavelength region to visualize protein structures down to 30 nm size without any staining methods. Due to the large depth of focus of the Fresnel zone plates used as X-ray objectives, computed tomography based on the X-ray microscopic images can be used to reconstruct the local linear absorption coefficient inside the three-dimensional specimen volume. High-resolution X-ray images require a high specimen radiation dose, and a series of images taken at different viewing angles is needed for computed tomography. Therefore, cryo microscopy is necessary to preserve the structural integrity of hydrated biological specimens during image acquisition. The cryo transmission X-ray microscope at the electron storage ring BESSY I (Berlin) was used to obtain a tilt series of images of the frozen-hydrated green alga Chlamydomonas reinhardtii. The living specimens were inserted into borosilicate glass capillaries and, in this first experiment, rapidly cooled by plunging into liquid nitrogen. The capillary specimen holders allow image acquisition over the full angular range of 180 degrees. The reconstruction shows for the first time details down to 60 nm size inside a frozen-hydrated biological specimen and conveys a clear impression of the internal structures. This technique is expected to be applicable to a wide range of biological specimens, such as the cell nucleus. It offers the possibility of imaging the three-dimensional structure of hydrated biological specimens close to their natural living state.     

Ozonation reduces sludge production and improves denitrification

The effectiveness of partial ozonation of return activated sludge for enhancing denitrification and waste sludge minimization were examined. A pair of nitrifying sequencing batch reactors was operated in either aerobic or alternating anoxic/aerobic conditions, with one control and one ozonated reactor in each set. The amount of solids produced decreased with the ozone dose. Biomass in the anoxic/aerobic reactor was easier to destroy (up to 25% of the initial excess sludge) than in the aerobic (10%) one, generating approximately twice as much soluble COD by cell lysis. Denitrification rate improved up to 60% due to additional carbon released by ozonation. Nitrification rates deteriorated much more in the aerobic than in the alternating reactor, possibly as a result of direct destruction of nitrifying autotrophs as well as competition created by growth of heterotrophs receiving the additional COD. Overall, ozonation provided the expected benefits in denitrification and had less impact on nitrification in the alternating reactors.     

施耐德电气公司低透配电新产品应用简介

施耐德电气公司生产的Masterpact，Compact和Easypact系列断路器目前巳全面升级，以更新更优的产品特性服务于中国低压配电市场。     

The strategic management of architectural practice

The paper develops a model for the strategic management of architectural practice with the aim of better understanding how practices compete with each other for work around a tripartite definition of quality. It assesses the ways in which architectural practices are distinctive as knowledge-based organizations, before assessing some of the characteristics of their industrial context. Drawing on the work of Maister and Porter, it then develops a model of generic strategies for architectural practice which, it is suggested, can form the basis for further research and consultancy. Finally, some comments are made suggesting why architectural practices are relucant to think in strategic terms.     

Determination of radon exhalation from construction materials using VOC emission test chambers

The inhalation of ²²²Rn (radon) decay products is one of the most important reasons for lung cancer after smoking. Stony building materials are an important source of indoor radon. This article describes the determination of the exhalation rate of stony construction materials by the use of commercially available measuring devices in combination with VOC emission test chambers. Five materials – two types of clay brick, clinker brick, light‐weight concrete brick, and honeycomb brick – generally used for wall constructions were used for the experiments. Their contribution to real room concentrations was estimated by applying room model parameters given in ISO 16000‐9, RP 112, and AgBB. This knowledge can be relevant, if for instance indoor radon concentration is limited by law. The test set‐up used here is well suited for application in test laboratories dealing with VOC emission testing.