Effect of Double Austenitization on the Microstructure and Hardness of High-Carbon Steel 1.4% C – 11.7% Cr

Metal Science and Heat Treatment - The effects of single and double austenitization at 900, 590, 1000 and 1050°C on the microstructure and hardness of quenched and tempered steel 1.4% C...     

The effect of ethane on the performance of commercial polyphenylene oxide and Cardo-type polyimide hollow fiber membranes in CO<Subscript>2</Subscript>/CH<Subscript>4</Subscript> separation applications

Impurities such as hydrogen sulfide, water vapor and heavy hydrocarbons in natural gas have considerable effects on the membrane performance. Small amounts of condensable and polymer soluble components in the feed gas cause swelling or plasticization of glassy membranes, leading to a reduction in membrane selectivity. In the present research the influence of ethane was investigated on the permeance and selectivity of two commercially available hollow fiber membranes, namely Cardo-type polyimide and PPO hollow fibers for CO₂/CH₄ separations. It was concluded that the gas mixture permeation rate was increased in the presence of C₂H₆. However, the CO₂/CH₄ separation factors remained almost the same in the presence and absence of the C₂H₆.     

Encapsulation Efficiency of Food Flavours and Oils during Spray Drying

Microencapsulation is a rapidly expanding technology which is a unique way to package materials in the form of micro- and nano-particles, and has been well developed and accepted within the pharmaceutical, chemical, food and many other industries. Spray drying is the most commonly used encapsulation technique for food products. A successful spray drying encapsulation relies on achieving high retention of the core materials especially volatiles and minimum amounts of the surface oil on the powder particles for both volatiles and non-volatiles during the process and storage. The properties of wall and core materials and the prepared emulsion along with the drying process conditions will influence the efficiency and retention of core compounds. This review highlights the new developments in spray drying microencapsulation of food oils and flavours with an emphasis on the encapsulation efficiency during the process and different factors which can affect the efficiency of spray drying encapsulation.     

Practical evaluation of relationship between concrete resistivity,water penetration,rapid chloride penetration and compressive strength

There are several factors and test methods for evaluating the durability of concrete. In recent years a great deal of attention has been paid to research and development of relationships of these parameters for production of sustainable concretes: water penetration and Rapid Chloride Penetration Test (RCPT) methods which are most commonly used to evaluate the permeability of concrete are two of the most famous methods specified by BS EN-12390-8:2000 and ASTM C1202 respectively. Concrete surface resistivity (SR) test is also a suitable indicator for concrete penetration and chloride ion permeability. It is a non-destructive, simple, rapid and economical method that can also be used on site.The present study is an exploratory research concerned with the relationship of these methods. Based on the correlation of concrete resistivity with water penetration and Rapid Chloride Penetration Test (RCPT) results, two new models for relating these parameters are presented.     

Numerical and experimental investigation of vortex breaker effectiveness on the improvement in launch vehicle ballistic parameters

The focus of the present study is to investigate the effectiveness of installing vortex breakers at the outlet of launch vehicle tanks on postponing vortex formation and decreasing the critical height of propellants while discharging. Analytical results in the absence of a vortex breaker show that the effects of the Weber and Reynolds numbers in the flow field can be ignored for values greater than 720 and 1.1 × 10⁵, respectively; and critical height can be considered as a function of Froude number under aforementioned conditions. The analytical criteria are verified by two-dimensional, axis symmetrical, transient and two-phase numerical model. Eventually, some experiments are conducted to examine the effectiveness of the applied vortex breakers in reduction of the critical height of propellant. Experimental results show that a 30% decrease can be achieved in critical height by using a particular type of vortex breaker. Additionally, the carried out simulations for an existing two-stage launch vehicle indicate a 13% increase in orbital altitude, which in turn proves the considerable improvement in launch vehicle mass/energetic capabilities.     

Evaluation of Lepidium sativum seed and guar gum to improve dough rheology and quality parameters in composite rice–wheat bread

The effects of hydrocolloids in rice–wheat flour were studied. Hydrocolloids at 0%, 0.3%, 0.6% and 1% w/w (flour basis) and guar (G), Lepidium sativum seed (L) and guar-L. sativum seed (GL) gum were tested as additives to the rice/flour in various combinations. The quality parameters for the experiment were assessed with farinography, extensography, amylography and texture profile analysis. The evaluation of dough rheology showed that water absorption, dough development time, dough stability and viscosity all increased with the addition of hydrocolloids alone or in a combination. It was demonstrated that G₁L₁ promoted the highest effect. The mixing tolerance index and gelatinization temperature decreased with an increased hydrocolloid concentration. Extensibility value for the dough that incorporated guar and L. sativum seed gum increased with increasing hydrocolloid concentration from 0.3% to 0.6% and then decreased at 1%. The water activity of all bread didn't have significant differences with increasing hydrocolloids concentration but this parameter 24 decreased during storage. Firmness decreased with increasing hydrocolloid concentration and increased with increasing storage time. The sensory evaluation by a consumer panel gave the higher score for overall acceptability to G_0.3L_0.3 and G_0.3L_0.6 samples. The results also showed that G₁L₁, G₁L_0.6 and G_0.6L₁ samples had high specific volume and porosity.     

Accurate analysis of spectral regrowth of nonlinear power amplifier driven by cyclostationary modulated signals

In this paper we present an exact analytical expression to calculate the spectral regrowth at the output of a nonlinear power amplifier (PA) using the higher order cumulants and Poisson summation formula. This PA is driven by the filtered digitally modulated signals. To improve the accuracy of the calculations, the cyclosationarity of the input signal is considered. Moreover, closed-form expressions for the 1-dB compression and saturation points are extracted as a function of the PA model parameters, higher order statistics of the input signal, and the transfer function of the pulse shaping filter. In addition, an analytical expression for the adjacent channel power (ACP) and a closed-form expression of the ACP ratio are derived. This is followed by investigation of the effect of the PA nonlinearity on the performance of receiver. Simulation studies are carried out to verify the accuracy of the derived expressions. Excellent agreement between the analytical and simulation results is achieved.     

Characterization and formation mechanism of nanocrystalline W–Al alloy prepared by mechanical alloying

Tungsten and aluminum elemental powders with composition W–20 wt.% Al were mechanical alloyed in high energy planetary ball mill. Structural and morphological changes of powder particles after different milling times were studied by X-ray diffractometer, scanning electron microscopy and microhardness measurements. Mechanical alloying of this system led to the formation of W–Al alloy as a result of formation of W/Al layered microstructure having faceted interface between layers. This alloy indicated high microhardness value of about 570 Hv.     

Osmotic and activity coefficients in the solutions of 1- and 2-naphthol in methanol and ethanol at 298.15 K

The osmotic coefficient of the solution, activity of the solvent and activity coefficient of the solute in solutions of 1- and 2-naphthol in methanol and ethanol have been measured by the isopiestic method. The experimental osmotic coefficient data were correlated using the Non-Random Two Liquid model (NRTL), the Non-Random Factor model (NRF), the two suffix Margules equation and a polynomial in terms of the molality of the solute. The models give reliable results for the correlation of the osmotic coefficient data. The activity coefficients of 1- and 2-naphthol were evaluated according to the considered methods using the parameters obtained by the correlation of osmotic coefficients.     

Tight bounds for the identical parallel machine scheduling problem

We address the problem of minimizing makespan on identical parallel machines. We propose new lower bounding strategies and heuristics for this fundamental scheduling problem. The lower bounds are based on the so‐called lifting procedure. In addition, two optimization‐based heuristics are proposed. These heuristics require iteratively solving a subset‐sum problem. We present the results of computational experiments that provide strong evidence that the new proposed lower and upper bounds consistently outperform the best bounds from the literature.