Impact Fracture of Thermally Tempered Glass Helicopter Windshields

In-service fracture of helicopter windshields was studied. Simulated catastrophic fracture tests were conducted by firing alumina and steel spheres onto stationary tempered and as-received glass panels. The results were studied by Hertzian analysis and modified Auerbach's relations. Thermally tempered glass shows much higher impact resistance than that estimated from superposition of residual stresses. Subcritical impact sites exhibit slow crack growth in tempered plates, eventually leading to fracture of the entire plate.     

Study of hot air generator with quasi-uniform temperature using concentrated solar radiation: Influence of the shape parameters

The non-uniformity of the air temperatures and the slow flow rate at the plane collector exit constitute the main cause of the limitations of the solar drying systems. In order to obtain an uniform and a variable flow rate for different uses, a hot air generator using concentrated solar radiation is proposed. To improve the thermal efficiency of the generator, a study of the influence of different shape parameters is realized. The generator is simulated in the laboratory while investigating the flow induced by a circular disc heated uniformly by Joule effect at constant temperature. This disc is placed at the entrance of an open ended vertical cylinder of a larger diameter. Thermal radiation emitted by the hot disc heats the cylinder wall. The heating of the fluid at the cylinder-inlet generates a thermosiphon flow around the one created by the hot disc. The comparison of the velocity and the temperature profiles of the resulting flow permits to determine the influence of the cylinder height, the vertical source-cylinder spacing and the radius ratio, on the resulting flow at the system exit. Thus, a judicious choice of the shape parameters entails an improvement of the flow rate as well as the thermal flux absorbed by the air and a good homogenization of the air temperature at the generator exit.     

Longitudinal bone mineral density changes in early rheumatoid arthritis

A prospective longitudinal study of patients with early RA was performed to examine the influence of disease duration, disease activity and physical activity on bone loss. Sixty-seven patients with non-steroid treated RA of less than 5 yr duration, including 16 patients with disease duration less than 6 months, had BMD measurements of the femoral neck and the lumbar spine over a 12-month period using dual energy X-ray absorptiometry. The BMD changes were compared with values from 72 control patients and were also correlated with serial measurements of disease activity (measured by the Stoke Index) and disability [measured by the Health Assessment Questionnaire (HAQ) score], at 3-monthly intervals over the 12-month period. No significant differences in BMD changes were found between RA patients and controls overall. Patients with disease duration of less than 6 months had significantly greater loss of BMD at the femoral neck (-3.9%, S.E.M. 1.5) than the remainder of the cohort (-0.2%, S.E.M. 0.7) (P = 0.02) and controls (-0.8%, S.E.M. 0.6). Lumbar spine BMD changes correlated with the initial Stoke Index (Rs-0.373, P = 0.01) but not mean Stoke Indices. There was no correlation of BMD changes with age or HAQ scores. These findings suggest that significant bone loss occurs within the first few months of disease in patients with RA.     

Biological rhythms as organization and information

The purpose of the current study was to describe four models of cognitive deficit and to outline the statistical hypotheses underlying each model. The four models of cognitive deficit were (a) specific deficit; (b) subgroup deficit; (c) a syndrome dissociation model; and (d) a global function dissociation model. Neuropsychological data are analyzed to examine each of these four models in a sample of mild Multiple Sclerosis (MS) patients. The results suggest that for these subjects and tests, the specific deficit model best fits the data. The results are reviewed initially in the context of MS. There follows a consideration of statistical caveats and finally, general applications of the proposed procedures.     

Structure of the repeating unit of acid polysaccharide from Alteromonas sp. 4MS17

An acidic polysaccharide from Alteromonas sp. 4MC17 is built up of trisaccharide repeating units containing D-glucose, D-mannose and D-galacturonic acid residues. On the basis of methylation studies, 1H and 13C NMR-spectroscopy data, including two-dimensional homonuclear correlation spectroscopy and nuclear Overhauser effects, the following structure was suggested for the polysaccharide repeating unit: -->4)-beta-D-Glcp-(1-->4)-beta-D-GalpA-(1-->4)-beta-D-Manp-( 1-->.     

Dual flaA1 flaB1 mutant of Serpulina hyodysenteriae expressing periplasmic flagella is severely attenuated in a murine model of swine dysentery

The motility imparted by the periplasmic flagella (PF) of Serpulina hyodysenteriae is thought to play a pivotal role in the enteropathogenicity of this spirochete. The complex PF are composed of multiple class A and class B polypeptides. Isogenic strains containing specifically disrupted flaAl or flaB1 alleles remain capable of expressing PF, although such mutants display aberrant motility in vitro. To further examine the role that these proteins play in the maintenance of periplasmic flagellar structural integrity, motility, and fitness for intestinal colonization, we constructed a novel strain of S. hyodysenteriae which is deficient in both FlaA1 and FlaB1. To facilitate construction of this strain, a chloramphenicol gene cassette, with general application as a selectable marker in prokaryotes, was developed. The cloned flaAl and flaB1 genes were disrupted by replacement of internal fragments with chloramphenicol and kanamycin gene cassettes, respectively. The inactivated flagellar genes were introduced into S. hyodysenteriae, and allelic exchange at the targeted chromosomal flaA1 and flaB1 loci was verified by PCR analysis. Immunoblots or cell lysates with antiserum raised against purified FlaA or FlaB confirmed the absence of the corresponding sheath and core proteins in this dual flagellar mutant. These mutations selectively abolished the expression of the targeted genes without affecting the synthesis of other immunologically related FlaB proteins. The resulting flaA1 flaB1 mutant exhibited altered motility in vitro. Surprisingly, it was capable of assembling periplasmic flagella that were morphologically normal as evidenced by electron microscopy. The virulence of this strain was assessed in a murine model of swine dysentery by determining the incidence of cecal lesions and the persistence of S. hyodysenteriae in the gut. Mice challenged with the wild-type strain or a passage control strain showed a dose-related response to the challenge organism. The dual flagellar mutant was severely attenuated in murine challenge experiments, suggesting that the FlaA1 and FlaB1 proteins are dispensable for flagellar assembly but critical for normal flagellar function and colonization of mucosal surfaces of the gastrointestinal tract. This strain represents the first spirochete engineered to contain specifically defined mutations in more than one genetic locus.     

Sensitivity analysis of the scattering parameters of microwave filters using the adjoint network method

A novel approach is presented to calculate the sensitivities of the scattering parameters of microwave filters obtained with the full‐wave mode‐matching (MM) technique. Using only the MM simulation of the original network, the sensitivities of the scattering parameters with respect to all designable parameters are obtained. The adjoint network method (ANM) is applied to the generalized scattering matrices of the different filter components. This guarantees good accuracy of the calculated sensitivities. The implementation details are discussed for N‐resonator ridge waveguide filters. Excellent agreement is obtained between the sensitivities calculated using ANM and those obtained using the expensive central differences. © 2006 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2006.     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.     

Quenching of chlorophyll fluorescence by quinones

Obese (Lepr(fa)/Lepr(fa)) Zucker rats have a missense mutation in the leptin receptor gene. One amino acid substitution in the extracellular domain common to all known leptin receptor proteins results from this mutation. Obese Zucker rats are unable to respond behaviorally to leptin which is peripherally administered. However, conflicting reports exist on whether obese Zucker rats can respond to centrally administered leptin. The purpose of this study was to determine whether obese Zucker rats responded behaviorally and metabolically to intracerebroventricularly (i.c.v.) administered leptin and to compare the responses of lean and obese Zucker rats. We found that both lean and obese Zucker rats had similar body weight and food intake responses when administered a single i.c.v. leptin injection in a range of doses (1.25, 2.5, 5, and 10 microg), as well as daily i.c.v. administered leptin for five consecutive days. Both single and daily leptin administration also decreased respiratory quotient (RQ) similarly in lean and obese Zucker rats, indicating mobilization of fat as an energy source for leptin-treated rats. After withdrawal of daily leptin treatment, lean and obese Zucker rats exhibited different recovery responses. It is concluded that obese Zucker rats can respond to exogenous leptin when leptin is delivered into the brain ventricles.     

Cognitive shifting as a predictor of progress in social understanding in high-functioning adolescents with autism: a prospective study

The pyrolytic behavior of inulin, a (2-->1)-linked fructofuranan, is described. Parallel investigations of the pyrolysis of glucose and of fructose were conducted to supplement the inulin results and to aid comparison with previous results from glucans. Effects of neutral and basic additives are emphasized. As with glucans, the addition of such additives (especially basic) increases the yields of the one-, two-, and three-carbon products (as well as of hexosaccharinolactones), while generally decreasing the yields of anhydro sugar and furan derivatives. The former products include glycolaldehyde, acetol, dihydroxy-acetone, acetic acid, formic acid, and lactic acid. Mechanistic speculations are made regarding the origins of these compounds, as well as of furan derivatives and saccharinic acid lactones. Parallels with alkaline degradation are considered.