Inter-plant hydrogen integration with regeneration placement and multi-period consideration

Inter-plant hydrogen integration (IPHI) is getting more attention in recent years, as a result of the increasing demand for hydrogen in refinery processes, such as hydrotreating and hydrocracking. In this work, IPHI with regeneration scheme is analyzed. Indirect integration scheme is adopted, where hydrogen sources from different hydrogen networks are integrated via a centralized purifier, such as pressure swing adsorption (PSA) or membrane separation. The introduced model is able to select the optimum interception unit, which minimizes the total annualized cost. Besides, multi-period consideration is included in the analysis to address the effect of changes in operating conditions of the IPHI network on total hydrogen consumption. Two case studies are presented to demonstrate the applicability and usefulness of the proposed model.     

Ion Beam Analysis and Normal-State Conduction Mechanisms for (Bi, Pb)-2223 and (Tl, Pb)/Sr-1212 Superconducting Phases Substituted by Ruthenium

Superconducting samples of type Bi_1.8Pb_0.4Sr₂Ca_2.1Cu_3−x Ru _x O_10+δ , (Bi, Pb)-2223, with 0.0≤x≤0.4 and type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ , (Tl, Pb)/Sr-1212, with 0.0≤x≤0.525 were synthesized using the standard solid-state reaction technique. The lattice parameters and the surface morphology for these samples were determined using X-ray powder diffraction (XRD) and scanning electron microscope (SEM) measurements, respectively. All element-contents of the samples prepared were estimated from the electron dispersive X-ray (EDX) technique, and their results were compared with those obtained from particle-induced X-ray emission (PIXE). In addition, the oxygen-content was determined using elastic Rutherford backscattering spectroscopy (RBS) technique at 3 MeV proton beam. The superconducting transition temperature T _c and the hole carrier concentration P were determined from the electrical resistivity measurement. The data of both T _c and P for Bi_1.8Pb_0.4Sr₂Ca_2.1Cu_3−x Ru _x O_10+δ and Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ phases increased up to x=0.05 and 0.075, respectively and then they decreased as x increased. The superconductivity was completely destroyed around x=0.4 and 0.525 for (Bi, Pb)-2223 and (Tl, Pb)/Sr-1212 phases, respectively. The normal-state electrical resistivity data were analyzed using the two and three dimensional variable range hopping (2D-VRH and 3D-VRH) and the Coulomb gab (CG).     

Coating of a lignocellulosic aggregate with pectin/polyethylenimin mixtures: Effects on flax shive and cement-shive composite properties

Lignocellulosic lightweight concretes are a potential contributor to sustainable development. However, lignocellulosic aggregates are not always fully compatible with cement matrices leading to setting delays, significant dimensional variations and low mechanical strengths. An aggregate treatment, reducing water absorption and water-soluble molecule release, can avoid or reduce these drawbacks. In this study a coating treatment, using a pectin/polyethylenimin (PP) mixture, was applied to flax shives, which is a lignocellulosic by-product. Before shive coating, a dilution with distilled water or a micro-wave heating were conducted to decrease PP mixture viscosity.The PP treatment involved a decrease in shive water absorption. Compared to standard shive concrete, treated shive concrete exhibited a decrease in setting delay with an increase in cement hydration enthalpy, an increase in mechanical strengths and a significant reduction in dimensional variations. Although a slight increase in thermal conductivity and bulk density was measured, the cement-shive composite obtained still belongs to the insulating concrete category.     

Transmission pricing and recovery of investment costs in the deregulated power system based on optimal circuit prices

Transmission pricing has become a major issue in the discussions about the deregulated electricity markets.Conse-quently,open access to the transmission system is one of the basic topics to allow compe...     

Charge transport mechanism of graphite‐nanosheet‐loaded rubber nanocomposites

Nitrile butadiene rubber loaded with different concentrations of thin graphite nanosheets have been successfully prepared by using a two‐roll mill. The percolation concentration of the nanocomposites was 0.5 phr. The I–V characteristic curves showed that the nanocomposites exhibited ohmic behaviour at a certain voltage and then non‐linear behaviour. The Richardson–Schottky and Poole–Frenkel models were used to investigate the reason for the space charge. The experimental data fit the Schottky model well. The conductivity as a function of temperature was also studied and the data were fitted by using the Mott relation. The Mott relation showed that as the concentration of graphite nanosheets in the rubber composite increases, the hopping distance between the graphite nanosheet layers decreases, which enhances the conductivity of the nanocomposite at low concentrations. Copyright © 2011 Society of Chemical Industry     

Modified Ultrasonic Technique to Study Gd-Doped ZnO Films

Normal ultrasonic transducers of 0.5, 1, and 2 MHz are modified using delay lines which are made of Quartz. Such modification is to ameliorate the capability of the transducer to investigate Gd-doped ZnO thin films whose thickness is too thin. The normal transducers cannot test materials that have too thin thickness due to the near fields of these transducers. The near field is considered as blind area of the transducer. Therefore, the specimen under test must have thickness bigger than the near field of the used transducer, or instead delay lines can be used. Samples of Gd-doped ZnO thin films are prepared using sol gel technique. The ultrasonic pulse echo method is used at room temperature. Flaws are found in different prepared specimens. Results show that such delay lines are suitable to ameliorate the ultrasonic transducer to test Gd-doped ZnO thin films.     

Magnetocaloric Effect in Sr0.4Ba1.6−x La x FeMoO6

Magnetocaloric effect in half-metallic double perovskite Sr_0.4Ba_1.6?x La _x FeMoO₆ (x = 0, 0.1, 0.2, 0.3) were investigated. It is shown that Sr_0.4Ba_1.6?x La _x FeMoO₆ exhibits the largest magnetic entropy change (ΔS _M ) of 0.086 J/kg K upon 0.2 T magnetic field variation. Furthermore, ΔS _M distribution of the Sr_0.4Ba_1.6?x La _x FeMoO₆ is much more uniform than that of gadolinium. Through these results, polycrystalline samples of Sr_0.4Ba_1.6?x La _x FeMoO₆ have some potential applications for magnetic refrigerants in a wide temperature range, including room temperature.     

Environmental impact assessment of the Egyptian cement industry based on a life-cycle assessment approach: a comparative study between Egyptian and Swiss plants

Egypt in 2015 announced the alteration of the fuels used in cement plants without the least regard to minimizing the environmental burden (EB) excesses. This study conducts a life-cycle assessment (LCA) of Egyptian cement-manufacturing unit, which is considered as the first one on LCA cement analysis to be conducted in Egypt. This study investigates the LCA of the cement industry in Egypt compared to the Swiss industry, using two methodologies. The first one has been done on-site, surveying the most common types of cement used in the construction industry in Egypt. Meanwhile, SimaPro software has been used to assess the environmental impacts, and three different cement plants were selected for this study: an Egyptian cement plant (ECP) which uses electricity, natural gas, and diesel as energy sources; a Swiss cement plant (SCP) which depends mainly on electricity, natural gas, and coal; and an Egyptian hypothetical plant (EHP) in which electricity and coal are assumed to be the main energy feeds, and comparisons of different strategies including midpoint and endpoint methods are outlined. Regarding the midpoint method, ETP recorded higher respiratory inorganics, aquatic acidification, global warming, and nonrenewable energy impacts than ECP, because of using coal, while for SCP, global warming and respiratory inorganics achieved the highest adverse impacts compared to ECP and EHP—due to the different manufacturing technology used. With regard to the endpoint method, the peak possibility of human health deterioration has been recorded due to the use of coal as fuel. This possibility was reduced by 46 % in the case of SCP as a result of the technology applied, which interestingly represents a reasonable reduction in terms of technological application.