Homelessness and its relation to the mental health and behavior of low-income school-age children

Manual handling of materials continues to be a hazardous activity, leading to a very significant number of severe overexertion injuries. Designing jobs that are within the physical capabilities of workers is one approach ergonomists have adopted to redress this problem. As a result, several job design procedures have been developed over the years. However, these procedures are limited to designing or evaluating only pure lifting jobs or only the lifting aspect of a materials handling job. This paper describes a general procedure that may be used to design or analyse materials handling jobs that involve several different kinds of activities (e.g. lifting, lowering, carrying, pushing, etc). The job design/analysis procedure utilizes an elemental approach (breaking the job into elements) and relies on databases provided in A Guide to Manual Materials Handling to compute associated risk factors. The use of the procedure is demonstrated with the help of two case studies.     

Simple,green approach for the synthesis of solid support‐embedded PdNPs for ligand exchange

Green approaches have the potential to significantly reduce the costs and environmental impact of chemical syntheses. Here, the authors used green tea (GT) leaf extract to synthesise and anchor palladium nanoparticles (PdNPs) to silica. The synthesised PdNPs in GT extract were characterised by ultraviolet–visible spectroscopy, Fourier‐transform infrared spectroscopy, X‐ray diffraction, and transmission electron microscopy. PdNPs primarily formed as capped NPs dispersed in GT extract before reduction completed after 24 h. This capped phytochemical solution was employed as a green precursor solution to synthesise PdNP‐embedded solid supports. The morphology of PdNPs anchored to silica differed to that of PdNPs in solution. Silica‐embedded PdNPs was employed as a new ligand exchanger to isolate trace polycyclic aromatic sulphur heterocycles from a hydrocarbon matrix. The isolation efficiency of the new, greener ligand exchanger was the same as an efficient chemical ligand exchanger and may, therefore, hold promise for future applications.Inspec keywords: nanofabrication, palladium, visible spectra, transmission electron microscopy, nanoparticles, reduction (chemical), ultraviolet spectra, X‐ray diffraction, Fourier transform infrared spectra, surface morphologyOther keywords: ultraviolet–visible spectroscopy, Fourier‐transform infrared spectroscopy, transmission electron microscopy, phytochemical solution, green precursor solution, PdNP‐embedded solid supports, solid support‐embedded PdNPs, green tea leaf extract, chemical ligand exchanger, anchor palladium nanoparticles, X‐ray diffraction, isolate trace polycyclic aromatic sulphur heterocycles, hydrocarbon matrix, green synthesis, time 24.0 hour, Pd     

Synthesis,characterization and antimicrobial properties of new poly(ether-ketone)s and copoly(ether-ketone)s containing diarylidenecycloalkanone moieties in the main chain

A new category of linear poly(ether-ketone)s IV_a–d and copoly(ether-ketone)s V_a–f containing diarylidenecycloalkanone moieties in the main chain has been synthesized by solution polycondensation of 4,4′-bis (chloroacetyl)diphenylether I , with different phenoxides of diarylidenecycloalkanones II_a–d . The model compound III was synthesized from the monomer I with sodium phenoxide in DMF and K₂CO₃, and its structure was confirmed by elemental and spectral analyses. The resulting polyketones and copolyketones were characterized by elemental and spectral analyses, beside solubility and viscometry measurements. The thermal properties of those polymers were evaluated by TGA and DTA measurements and correlated to their structural units. X-ray analysis showed that polymers having some degree of crystallinity in the region 2θ = 5–60°. In addition, the biological screening and morphological properties of selected examples of the polymers were tested. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Low voltage CMOS fully differential current feedback amplifier with controllable 3-dB bandwidth

This paper presents a CMOS fully differential current feedback operational amplifier with controllable 3-dB bandwidth. The FDCFOA has the advantage of a wide range controllable 3-dB bandwidth (∼57–500 MHz) without changing the feedback resistance. The FDCFOA has a standby current of 320 μA. Application of the proposed FDCFOA in realizing second order low-pass filter with controllable 3-dB bandwidth is given. PSpice simulations of the FDCFOA block and its application are given using 0.25 μm CMOS technology from MOSIS and dual supply voltages ±0.75 V.     

Magnetic behavior of polycarbosilazane ?FeII, ?FeIII and mixed‐valence ?FeII–III chloride metallopolymers

Fe^II, Fe^III and mixed‐valence Fe^II–III chlorides were reacted with poly[N,N′‐bis(dimethylsilyl)ethylenedi‐ amine], [? Si(CH₃)₂NHCH₂CH₂NH? ]_n, to form the corresponding Fe‐polycarbosilazane macromolecular complexes. The average chain–chain spacing in these materials was estimated from X‐ray diffraction data and found to be 6.94, 7.29, 7.30 and 7.45 Å in metal‐free and Fe^II? , Fe^III? and Fe^II–III‐containing polycarbosilazanes, respectively. This demonstrates that Fe^II, Fe^III and Fe^II–III chlorides are encapsulated between the polycarbosilazane chains. The chain–chain expansions in the divalent Fe^II and trivalent Fe^III chloride macromolecular complexes are comparable, but less than that in the Fe^II–III chloride analog, which suggests that different chain–chain packings exist in the mixed‐valence macromolecular complex. The magnetic properties of the resulting complexes were investigated by measuring the magnetization in magnetic fields up to 8 kOe and in the temperature range from liquid nitrogen temperature to room temperature. Copyright © 2007 Society of Chemical Industry     

Effects of irrigation water quantities and seasonal variation on oil content and fatty acid composition of sunflower (Helianthus annuus L.)

A field experiment was conducted in the North Western Group of the Gezira Scheme (longitude 32°48′ and latitude 15°14′) for four successive seasons, two winter and two summer seasons, during the years 1999–2002, to study the effect of different irrigation water quantities (300, 400, 500, 600 and 700 mm per season) on oil content and oleic acid and linoleic acid percentages in two sunflower cultivars [Rodeo, an open‐pollinated variety, and Hysun33, a hybrid). The experiment was designed in a split plot design, with four replicates. The cultivars were allotted to the sub‐plots while the irrigation treatments were assigned to main plots. The results showed that different irrigation water quantities had significant effects on all parameters studied and the cultivar Hysun33 gave a higher oil content (36.6%) at 700 mm whereas the open‐pollinated variety Rodeo gave 34.1% oil at that level of irrigation. The overall percentages of oleic and linoleic acids were 29.7 and 58.1 in winter and 47.6 and 43.1 in summer, respectively. Copyright © 2007 Society of Chemical Industry     

Effect of breed type,housing and feeding system on performance of growing pigs managed under organic conditions

BACKGROUND: There is a need for information on the performance and carcass quality of pigs under different organic management systems. This study compared Duroc‐sired progeny from three maternal breed types when kept either at pasture or in housing with an outdoor run and offered ad libitum concentrate either alone or with fodder beet or grass/clover silage as additional forage. RESULTS: Liveweight gain, feed intake and the proportion of forages consumed did not differ between genotypes. Carcass fatness of progeny was lowest for a ‘modern’ genotype (Camborough 12) and highest for a ‘traditional’ purebred genotype (Saddleback), with a ‘crossbred traditional’ genotype (Saddleback × Duroc) being intermediate (11.4, 14.3 and 13.4 mm P₂ respectively, standard error of mean (SEM) 0.27, P < 0.001). With a cereal‐based concentrate available ad libitum, intake of forages was low (<2% of dry matter intake). Although growth rate did not differ between housing systems, daily feed intake was greater at pasture (2.47 vs 2.22 kg meal equivalent, SEM 0.05, P < 0.001), giving poorer feed efficiency (P < 0.01). Pastured animals consumed less additional forage and had a higher killing‐out % but similar carcass fatness. CONCLUSION: For organic pig production to be financially sustainable, disadvantages arising from the genotype and/or rearing system chosen need to be offset by a market premium for the pigs produced. Copyright © 2007 Society of Chemical Industry