Performance Evaluation and Biodegradation Study of Polyvinyl Chloride Films with Castor Oil-based Plasticizer

In the present study, a renewable resource-based plasticizer was synthesized by the lipase-catalyzed esterification reaction of furfuryl alcohol (FA) and castor oil fatty acid (COFA). The resultant ester (FA-COFA ester) was used as secondary plasticizers to the polyvinyl chloride (PVC) films. The PVC films were formulated using the combination of a conventional plasticizer di-butyl phthalate (DBP) and FA-COFA ester as a secondary plasticizer at different concentrations. Films were characterized by X-ray diffraction analysis, scanning electron microscopy, thermal analysis, mechanical performance, and migration stability. A biodegradability study of the PVC films showed increased degradability with increasing concentration of the FA-COFA ester in the PVC film. The study showed that ester of FA and COFA could be a substitute of DBP by as much as 80% of the total plasticizer with improved elongation and tensile properties, and such a kind of sustainable resource-based PVC blend films could be used as a good packaging material with biodegradable property.     

A novel method for synthesis of α-Si3N4 nanowires by sol–gel route

Silicon nitride (Si₃ N₄) nanowires have been prepared by carbothermal reduction followed by the nitridation (CTRN) of silica gel containing ultrafine excess carbon obtained by the decomposition of dextrose over the temperature range of 1200–1350 °C. This innovative process involves repeated evacuation followed by purging of nitrogen gas so that the interconnected nanopores of the gel are filled with nitrogen gas prior to heat treatment. During heat treatment at higher temperatures, the presence of nitrogen gas in the nanopores of the gel starts the CTRN reaction simultaneously throughout the bulk of the gel, leading to the formation of Si₃ N₄ nanowires. The in situ generated ultrafine carbon obtained by the decomposition of dextrose decreases the partial pressure of oxygen in the system to stabilize the nanowires. The nanowires synthesized by this process are of ∼500 nm diameter and ∼0.2 mm length. The product was characterized by scanning electron microscope (SEM), energy dispersive x-ray analysis (EDX), x-ray diffraction (XRD) and infrared (IR) spectra.     

Hill slope instability of Nainital City,Kumaun Lesser Himalaya,Uttarakhand, India

Nainital City of Kumaun Lesser Himalaya is prone to mass wasting processes during monsoon season, which mischievously triggers the hill slope instability in this region. Slate, dolomitic limestone, silty sandstone and rhythmite of the Krol Formation are the main rock types. The present study focuses on the investigation of slope stability in the region in terms of potential seismicity and landslide. Geological and geotechnical mapping indicates that the major portion of the area is characterized by slope wash materials and buildings. The combination of 3–4 joint sets with one random joint is the main structure at outcrops. The major geological structures of this area are Nainital lake fault passing from the center of the lake, Main Boundary Thrust at SW, and Khuriya Fault passing from the SE direction of Nainital City. This work finds that different types of discontinuities (e.g. joints and faults), overburden due to unplanned civil structures, and neotectonic activity in the vicinity of this area affect the stability of the city. The slate forms the base of the city, dipping slightly towards the lake side along the NW direction, thus accelerating the instability of this area. Rock mass rating (RMR), slope mass rating, factor of safety (FOS) and graphical analysis of the discontinuity for slope kinematics indicate that the study area is a landslide-prone zone. This study can facilitate reducing the risk of human life, and contribute to the ongoing construction works in the area.     

Investigations of AB5-type negative electrode for nickel-metal hydride cell with regard to electrochemical and microstructural characteristics

In the present investigation, AB₅-type hydrogen storage alloys with compositions Mm_0.8La_0.2Ni_3.7Al_0.38Co_0.3Mn_0.5Mo_0.02 and Mm_0.75Ti_0.05La_0.2Ni_3.7Al_0.38Co_0.3Mn_0.5Mo_0.02 are synthesized by radio-frequency induction melting. The electrochemical properties are studied through the measurements of discharge capacity, activation process, rate capability, self-discharge rate and cyclic stability of both the electrodes. Pressure-composition isotherms are plotted by converting the electrode potential into the hydrogen pressure following the Nernst equation. The structural and microstructural characterizations are performed by means of X-ray diffraction phase analysis and scanning electron microscopy of as-fabricated and electrochemically tested electrodes. An attempt is made to correlate the observed electrochemical properties with the structural–microstructural characteristics.     

A numerical study on nonlinear DPL model for analyzing heat transfer in tissue during thermal therapy

In the present paper, therapeutic treatment of infected tumorous cells has been studied through mathematical modeling and simulation of heat transfer in tissues by using a nonlinear dual-phase lag bioheat transfer model with Dirichlet boundary condition. The components of volumetric heat source in this model such as blood perfusion and metabolism are assumed experimentally validated temperature-dependent function, which gives more accurate temperature distribution in tissues through this model. We have used the finite difference and RK (4, 5) techniques of numerical methods to solve the proposed problem and obtained the exact solution in a particular case. After comparison, we got a good agreement between them. We have used dimensionless quantities throughout this paper. The effect of relaxation and thermalization time with respect to dimensionless temperature distribution has been analyzed in the treatment process.     

Investigation of Power on Silicon Adiabatic for VLSI Applications

Silicon - In this article, a novel silicon adiabatic circuit is proposed for low power applications. To achieve efficient performance, the charging and the discharging diodes in the energy recovery...     

Synthetic musk emissions from wastewater aeration basins

Wastewater aeration basins at publicly owned treatment works (POTWs) can be emission sources for gaseous or aerosolized sewage material. In the present study, particle and gas phase emissions of synthetic musks from covered and uncovered aeration basins were measured. Galaxolide (HHCB), tonalide (AHTN), and celestolide (ADBI) were the most abundant, ranging from 6704 to 344,306 ng m⁻³, 45-3816 ng m⁻³, and 2-148 ng m⁻³ in the gas phase with particle phase concentrations 3 orders of magnitude lower. The musk species were not significantly removed from the exhaust air by an odor control system, yielding substantial daily emission fluxes (∼200 g d⁻¹ for HHCB) into the atmosphere. However, simple dispersion modeling showed that the treatment plants are unlikely to be a major contributor to ambient air concentrations of these species. Emission of synthetic musk species during wastewater treatment is a substantial fate process; more than 14% of the influent HHCB is emitted to the atmosphere in a POTW as opposed to the <1% predicted by an octanol-water partition coefficient and fugacity-based US EPA fate model. The substantial atmospheric emission of these compounds is most likely due to active stripping that occurs in the aeration basins by bubbling air through the sludge.