Near-zone gain of open-ended rectangular waveguides

Full-wave solutions to the problem of radiation by open-ended rectangular waveguides (OEG) are presented. The radiation problem is formulated in terms of an electric field integral equation (EFIE). The EFIE is solved using the method of moments for three OEG antennas covering the frequency range from 200 to 750 MHz. Results for the near-zone gains as a function of both frequency and distance from the OEG aperture are presented. Estimates for uncertainties in the calculated gain are also given     

The Michigan benchmark: towards XML query performance diagnostics

We propose a micro-benchmark for XML data management to aid engineers in designing improved XML processing engines. This benchmark is inherently different from application-level benchmarks, which are designed to help users choose between alternative products. We primarily attempt to capture the rich variety of data structures and distributions possible in XML, and to isolate their effects, without imitating any particular application. The benchmark specifies a single data set against which carefully specified queries can be used to evaluate system performance for XML data with various characteristics.     

单模光纤中模耦合微扰功率谱与偏振关系的研究

提出用测量光纤偏振耦合率来确定模耦合系数，从而得到耦合微扰功率谱与双折射关系。它给出了光纤拉制中微扰作用 的信息，是研制偏振光纤的一种有效方法。     

Micromechanical characterisation of fibre/matrix interfaces

Theoretical analyses for the single fibre pull-out and push-out models under monotonic loading are given which are based on a shear-lag analysis in a fracture mechanics approach considering non-constant friction at the debonded interface as a result of fibre Poisson contraction (or expansion). The solutions allow the determination of typical fibre/matrix interfacial properties such as the interfacial fracture toughness, G_ic, the coefficient of friction, μ, and the residual clamping stress, q₀. Under cyclic loading the interfacial properties are expected to degrade as a result of repetitive abrasion, and a power law function is assumed between μ and the number of elapsed cycles, N. However, G_ic is assumed to be unaffected and a fracture mechanics based debond criterion is derived for the relationship between the external applied stress, the debond length and the reduced friction coefficient for both fibre pull-out and fibre push-out. In addition, the relative displacements between the free fibre end and the matrix top are obtained for cyclic fatigue when the fibre is loaded and unloaded. A relationship obtained for the protrusion (or intrusion) length in fibre pull-out (or push-out) experiments allows the severity of the interface frictional degradation to be evaluated and characterised. Similarities and differences in the frictional degradation behaviour between fibre pull-out and push-out are also identified.     

Preparation and characterization of transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency

Transparent ZnO/epoxy nanocomposites with high-UV shielding efficiency were reported in this paper. First, zinc oxide (ZnO) precursor was synthesized via the homogeneous precipitation method and ZnO nanoparticles were then made by calcination of the precursor at different temperature. The structural properties of the as-prepared ZnO nanoparticles were studied in detail using thermogravimetry (TGA), differential thermal analysis (DTA), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR) and transmission electron microscopy (TEM), respectively. Transparent ZnO/epoxy nanocomposites were subsequently prepared from transparent epoxy (EP-400) and as-prepared ZnO nanoparticles via in situ polymerization. Optical properties of ZnO/epoxy nanocomposites, namely visible light transparency and UV light shielding efficiency, were studied using an ultraviolet-visible (UV-vis) spectrophotometer. The optical properties of the as-obtained nanocomposites were shown to depend on ZnO particle size and content. The nanocomposite containing a very low content (0.07% in weight) of ZnO nanoparticles with an average particle size of 26.7 nm after calcination at 350 °C possessed the most optimal optical properties, namely high-visible light transparency and high-UV light shielding efficiency, that are desirable for many important applications.     

On the Cutoff Wavelength of Rectangular-Shaped Microshield Line by Edge Element Method

In this paper, the cutoff characteristic of rectangular-shaped microshield transmission line has been analysed by edge element method. Dependence of cutoff wavelengths on the thickness of metallic signal strip, dielectric constant of dielectric substrate and the width of the rectangular-shaped ground conductor are presented in tabular form. Numerical results in this paper have important values in design of rectangular-shaped microshield lines in microwave and millimeter wave integrated circuits.     

Luft

Ohne Zusammenfassung     

Konservierungsmittel

Ohne Zusammenfassung     

Milch und K?se

Ohne Zusammenfassung