Hybrid gas-to-particle conversion and chemical vapor deposition for the production of porous alumina films

Porous alumina films can be found in a wide variety of materials, including filters, thermal insulation components, dielectrics, biomedical and catalyst supports, coatings and adsorbents. Production methods for these films are as equally diverse as their applications. In this work, a hybrid process based upon chemical vapor deposition and gas-to-particle conversion is presented as an alternative technique for producing porous alumina films, with the main advantages of solvent-free, low substrate-temperature operation. In this process, nanoparticles were produced in the vapor phase by reaction of aluminum acetylacetonate in the presence of oxygen. Downstream of this reaction zone, these nanoparticles were collected via thermophoresis onto a cooled substrate, forming a porous film. Some deposited films were subjected to post-processing in the form of annealing in air. Fourier-transform infrared spectra and X-ray energy-dispersive spectroscopy analysis confirmed the production of alumina at processing temperatures above 973 K. X-Ray diffraction revealed that the films were amorphous. Film thickness, ranging from 30 to 250 μm, and the average deposition rate were determined from scanning electron microscopy results. From transmission electron microscopy, the average primary particle size was determined to be approximately 18 nm and the formation of nanoparticle aggregates was evident. Annealing of the films at temperatures ranging from 523 to 1173 K in the presence of air did not have an effect on particle size. The specific surface area of the powder composing the films ranged from 10 to 185 m² g⁻¹, as determined from nitrogen gas adsorption by the Brunauer–Emmett–Teller method.     

Development of a Tunable Multiband UWB Radar Sensor and Its Applications to Subsurface Sensing

Development of a new tunable multiband ultra-wideband (UWB) radar sensor is presented. The UWB sensor integrates the transmitter, receiver, and antennas completely in a single package using microwave integrated circuits and operates over multiple pulse durations or frequency bands. The sensor can transmit pulses with duration varying from 450 to 1170 ps and peak power from 200 to 400 mW and can detect signals with a conversion gain of 6.5-9.5 dB and a dynamic range of 50dB over a 5.5-GHz RF bandwidth. It has a range resolution of around 1 in. The sensor performs well through tests of various samples, demonstrating its success for subsurface sensing. The multipulse/multiband feature allows the sensor to achieve both fine-range resolution and long operating range and enhanced target detection and classification     

Increase in urinary calcium and oxalate after fructose infusion

We have previously shown that an oral glucose load increased both calciuria and oxaluria while the ingestion of fructose induced a rise in calciuria and a decrease in oxaluria. This latter effect remains unclear and might be linked to the reduced intestinal oxalate absorption subsequent to digestive intolerance in some subjects. Such a hypothesis could be enlightened by the study of a parenteral fructose load. Therefore in 7 healthy subjects, we compared the effects of fructose infusion (F) (15 min iv infusion at 0.185 mmol/kg BW/min) to a control glucose infusion (G) on urinary calcium and oxalate. In this study, glycemia and insulinemia increased less after (F) than after (G) (respectively + 21% vs + 216%, p < 0.001 and + 230% vs + 402%, p < 0.05) and phosphatemia decreased less after (F) than after (G) (-7% vs -14%, p < 0.05). Urinary calcium and oxalate increased only after (F) (respectively + 64%, p < 0.01 and + 60%, p < 0.05). Urinary uric acid, another urolithiasis factor, increased after both (F) and (G) (respectively + 45%; p < 0.01 and + 42%; p < 0.01) but uricemia increased only after (F) (+ 25%; p < 0.01). Our results suggest an additional reason to avoid the use of fructose in parenteral nutrition, particularly in individuals with a known history of either calcium oxalate or urate urolithiasis.     

Energy-aware wireless networking with directional antennas: the case of session-based broadcasting and multicasting

We consider ad hoc wireless networks that use directional antennas and have limited energy resources. To explore quantitatively the advantage offered by the use of directional antennas over the case of omnidirectional antennas, we consider the case of connection-oriented multicast traffic. Building upon our prior work on multicasting algorithms, we introduce two protocols that exploit the use of directional antennas and evaluate their performance, We observe significant improvement with respect to the omnidirectional case, in terms of both energy efficiency and network lifetime. Additionally, we show that further substantial increase in the network's lifetime can be achieved by incorporating a simple measure of a node's residual energy into the node's cost function.     

In situ SEM studies on the effects of particulate reinforcement on fatigue crack growth mechanism of aluminium-based metal-matrix composite

The effects of particulate reinforcement on the fatigue behaviour and fatigue mechanisms of two 6061 aluminium-based metal-matrix composites (MMCs) in three different heattreatment conditions were studied in situ with a scanning electron microscope and compared to the unreinforced alloy in the as-received condition. It was observed that the fatigue properties of the MMCs were influenced by the ceramic particles in two ways: firstly the particles increased the fatigue stress intensity threshold mainly by crack-deflection and crack-closure mechanisms, and secondly, the particles raised the fatigue crack growth rates in the Paris region by providing an easy crack path. The effect of ageing was small on the fatigue stress intensity threshold of MMCs, but for the peak-aged MMCs the fatigue crack growth rates in the Paris region were faster. The mechanism of fatigue crack growth was largely associated with the matrix/particle interface and the linkage with subcracks initiated ahead of the main crack at high applied stress intensity factors.     

A new millimeter-wave step-frequency radar sensor for distancemeasurement

A new compact millimeter-wave distance-measurement sensor prototype has been developed. The sensor is a step-frequency radar implemented using coherent heterodyne technique. It operates in Ka-band (26.5-40 GHz) and is realized using MICs and MMICs. The sensor transmits sinusoidal signals of incremental frequencies and demodulates the received signals into base-band I/Q signals for processing. Experimental results show that the sensor is capable of measuring distance with less than 0.2 inch of absolute error and a low transmitted power of only -20±3 dBm     

A selective CVD tungsten-strapped polysilicon local interconnectiontechnology

A local interconnection technology utilizing polysilicon strapped with selective-chemical-vapor-deposited (CVD) tungsten has been developed. Both n- and p-channel MOS transistors have been successfully fabricated using this technology. Tungsten deposited on polysilicon is an attractive gate shunt and local interconnection material because of its low resistivity, immunity to dopant segregation and diffusion, and resistance to electromigration. A potential problem of this technology is the excessive diode leakage current associated with strapping shallow source/drain diodes with tungsten. The leakage is attributed to defects induced by the heavy source/drain implant, which can be effectively eliminated with a proper annealing procedure     

Benchmarks of simple, generic, shaped plates for validation oflow-frequency electromagnetic computational codes

The validation of low-frequency measurements and electromagnetic (EM) scattering computations for several simple, generic shapes, such as an equilateral-triangular plate, an equilateral-triangular plate with a concentric equilateral-triangular hole, and diamond- and hexagonal-shaped plates, is discussed. The plates were constructed from a thin aluminium sheet with a thickness of 0.08 cm. EM scattering by the planar plates was measured in the experimental test range (ETR) facility of NASA Langley Research Center. The dimensions of the plates were selected such that, over the frequency range of interest, the dimensions were in the range of λ₀ to 3λ₀. In addition, the triangular plate with a triangular hole was selected to study internal-hole resonances