Nucleation mode particles with a nonvolatile core in the exhaust of a heavy duty diesel vehicle

The characteristics of the nucleation mode particles of a Euro IV heavy-duty diesel vehicle exhaust were studied. The NOx and PM emissions of the vehicle were controlled through the use of cooled EGR and high-pressure fuel injection techniques; no exhaust gas after-treatment was used. Particle measurements were performed in vehicle laboratory and on road. Nucleation mode dominated the particle number size distribution in all the tested driving conditions. According to the on-road measurements, the nucleation mode was already formed after 0.7 s residence time in the atmosphere and no significant changes were observed for longer residence times. The nucleation mode was insensitive to the fuel sulfur content, dilution air temperature, and relative humidity. An increase in the dilution ratio decreased the size of the nucleation mode particles. This behavior was observed to be linked to the total hydrocarbon concentration in the diluted sample. In volatility measurements, the nucleation mode particles were observed to have a nonvolatile core with volatile species condensed on it. The results indicate that the nucleation mode particles have a nonvolatile core formed before the dilution process. The core particles have grown because of the condensation of semivolatile material, mainly hydrocarbons, during the dilution.     

Influence of carbon nanotube-polymeric compatibilizer masterbatches on morphological, thermal, mechanical, and tribological properties of polyethylene

Study was made of the effect of multiwall carbon nanotubes (MWCNTs) and polymeric compatibilizer on thermal, mechanical, and tribological properties of high density polyethylene (HDPE). The composites were prepared by melt mixing in two steps. Carbon nanotubes (CNTs) were melt mixed with maleic anhydride grafted polyethylene (PEgMA) as polymeric compatibilizer to produce a PEgMA-CNT masterbatch containing 20 wt% of CNTs. The masterbatch was then added to HDPE to prepare HDPE nanocomposites with CNT content of 2 or 6 wt%. The unmodified and modified (hydroxyl or amine groups) CNTs had similar effects on the properties of HDPE-PEgMA indicating that only non-covalent interactions were achieved between CNTs and matrix. According to SEM studies, single nanotubes and CNT agglomerates (size up to 1 μm) were present in all nanocomposites regardless of content or modification of CNTs. Addition of CNTs to HDPE-PEgMA increased decomposition temperature, but only slight changes were observed in crystallization temperature, crystallinity, melting temperature, and coefficient of linear thermal expansion (CLTE). Young’s modulus and tensile strength of matrix clearly increased, while elongation at break decreased. Measured values of Young’s moduli of HDPE-PEgMA-CNT composites were between the values of Young’s moduli for longitudinal (E₁₁) and transverse (E₂₂) direction predicted by Mori-Tanaka and Halpin-Tsai composite theories. Addition of CNTs to HDPE-PEgMA did not change the tribological properties of the matrix. Because of its higher crystallinity, PEgMA possessed significantly different properties from HDPE matrix: better mechanical properties, lower friction and wear, and lower CLTE in normal direction. Interestingly, the mechanical and tribological properties and CLTEs of HDPE-PEgMA-CNT composites lie between those of PEgMA and HDPE.     

Wood cell wall mimicking for composite films of spruce nanofibrillated cellulose with spruce galactoglucomannan and arabinoglucuronoxylan

Two hemicelluloses (HCs), galactoglucomannan (GGM) and arabinoglucuronoxylan (AGX), and nanofibrillated cellulose (NFC) were isolated from spruce wood and used for the preparation of composite films containing high amounts of cellulose, i.e. 85 and 80 wt% of NFC, respectively. The films were prepared in two ways: (i) by the pre-sorption of HCs on NFC and (ii) by the mixing of components in the usual way. Pre-sorption was applied in an attempt to mimic the carbohydrate biosynthesis pattern during wood cell wall development, where HCs were deposited on the cellulose fibrils prior to lignification taking place. It was assumed that pre-sorption would result in a better film-forming as well as stronger and denser composite films. The mechanical, thermal, structural, moisture sorption and oxygen barrier characteristics of such composite films were tested in order to examine whether the performance of composite films prepared by pre-sorption was better, when compared to the performance of composite films prepared by mixing. The performance of composite films was also tested with respect to the HCs used. All the films showed quite similar barrier and mechanical properties. In general, stiff, strong and quite ductile films were produced. The moisture sorption of the films was comparably low. The oxygen barrier properties of the films were in the range of commercially used poly ethylene vinyl alcohol films. However, the pre-sorption procedure for the preparation of composite films resulted in no additional improvement in the performance of the films compared to the corresponding composite films that had been prepared using the mixing process. Almost certainly, the applied mixing process led to an optimal mixing of components for the film performance achieved. The GGM contributed to a somewhat better film performance than the AGX did. Indications were observed for stronger interactions between the GGM and NFC than that for the AGX and NFC.     

Blanching and long‐term freezing affect various bioactive compounds of vegetables in different ways

An extensive study on the effects of blanching/freezing and long‐term freezer storage on various bioactive compounds of more than 20 commonly used vegetables was performed. Effects were strongly plant species‐dependent. Contents of dietary fibre components either were not affected or increased slightly. Minerals in general were also stable, but some losses of soluble minerals by leaching were observed. Phenolic antioxidants and vitamins were clearly more sensitive. Significant losses (20–30%) of antioxidant activity and total phenolics were detected in many vegetables. A qualitative HPLC profiling method for phenolic antioxidants was developed which proved to be very useful when evaluating the complex behaviour of phenolics during food processing. Up to one‐third of vitamin C contents were lost during blanching, and further slight losses were detected during storage. Folic acid turned out to be very sensitive to blanching, with more than half of the vitamin being lost, but was stable during freezer storage. Carotenoids and sterols were not affected by blanching or freezer storage. The usefulness of the applied screening methods for evaluation of the effects of processing on vegetables is shown. Copyright © 2003 Society of Chemical Industry     

Quantitative Insight into the Design of Compounds Recognized by the L‐Type Amino Acid Transporter 1 (LAT1)

L ‐Type amino acid transporter 1 (LAT1) is a transmembrane protein expressed abundantly at the blood–brain barrier (BBB), where it ensures the transport of hydrophobic acids from the blood to the brain. Due to its unique substrate specificity and high expression at the BBB, LAT1 is an intriguing target for carrier‐mediated transport of drugs into the brain. In this study, a comparative molecular field analysis (CoMFA) model with considerable statistical quality (Q²=0.53, R²=0.75, Q² SE=0.77, R² SE=0.57) and good external predictivity (CCC=0.91) was generated. The model was used to guide the synthesis of eight new prodrugs whose affinity for LAT1 was tested by using an in situ rat brain perfusion technique. This resulted in the creation of a novel LAT1 prodrug with L ‐tryptophan as the promoiety; it also provided a better understanding of the molecular features of LAT1‐targeted high‐affinity prodrugs, as well as their promoiety and parent drug. The results obtained will be beneficial in the rational design of novel LAT1‐binding prodrugs and other compounds that bind to LAT1.     

Distribution of monomeric,dimeric and polymeric products of stigmasterol during thermo‐oxidation

When plant sterols are oxidized at moderate temperatures (≤100 °C), products mainly derive from hydroperoxides, but at temperatures close to 200 °C, thermal reactions such as dehydration and condensation become important. Although sterols are often subjected to frying conditions, very little is known of their thermal reactions. In this study, stigmasterol was thermo‐oxidized at 180 °C, and the formation of dimers and polymers and the amounts of monomers were measured by high‐performance size‐exclusion chromatography. The products were further characterized by polarity using solid‐phase extraction fractionation. During heating, the amounts of monomers decreased at a steady rate, and those of dimers and polymers increased. After 3 h of heating, 21% of the material existed in higher‐molecular‐weight products. The amount of polar monomers increased especially during the first hour, demonstrating the formation of oxides and their further reactions, while that of mid‐polar monomers decreased constantly, indicating losses of stigmasterol. Polar dimers contributed to approximately 60% of the dimers, and polar polymers to approximately 78% of the polymers, which suggests that in most higher‐molecular‐weight products at least one of the sterol moieties was oxidized. This study showed that a significant proportion of thermo‐oxidation products are not polar monomeric oxides which are commonly analyzed as oxidation products.     

Prenatal expectations in transition to parenthood: Former infertility and family dynamic considerations.

Prenatal expectations are important for the future parent–child relationship. The authors examined how maternal and paternal prenatal expectations of the relationship with the child predicted 1st-year parenting stress and whether these expectations were violated over the transition to parenthood. They further examined how former infertility affected these associations. The participants were 745 Finnish couples, 367 having undergone a successful assisted reproductive treatment and 378 conceiving spontaneously. Couples completed a questionnaire of family representations during pregnancy and when the child was 2 and 12 months old and Abidin’s Parenting Stress Index at 2 and 12 months postpartum. The hypothesis of moderately high expectations predicting the lowest level of parenting stress was substantiated only concerning paternal expectations of own autonomy with the child. Generally, however, negative expectations of own and spouse’s relationship with the child were linearly associated with higher parenting stress. Postnatal representations were more positive or equal to expectations, except for negative violation occurring in maternal expectation of the father–child relationship, especially among normative mothers. The results are discussed in relation to family dynamic considerations and special features of formerly infertile couples. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Crosslinking with ammonium zirconium carbonate improves the formation and properties of spruce galactoglucomannan films

Spruce (Picea abies) O-acetyl-galactoglucomannans (GGMs), low-value by-products from the forestry industry were upgraded to sustainable film-forming materials by crosslinking with ammonium zirconium carbonate (AZC). The purpose of crosslinking was to enhance the film formation, reduce the need of polyol plasticizers, and decrease the sensitivity of the film properties to moisture. Tensile testing showed that AZC-crosslinked GGM can be used to prepare strong and stiff films, with tensile strength up to 52 MPa and Young’s modulus of 4.7 GPa. Dynamic mechanical analysis, performed as a function of relative humidity (RH), showed that AZC-crosslinked GGM films retained their stiffness at higher RH than the reference films without AZC. Water vapor sorption and permeability analyses were done to further study the effect of moisture on the film properties, and those showed that the effect of sorbitol as a plasticizer depended greatly on RH. The oxygen permeability of the AZC-crosslinked GGM films was in the range of 4–11 [cm³ μm/(m² day kPa)]. GGM films could offer a bio-based and biodegradable alternative to existing synthetic oxygen barrier materials, on the condition that they are protected from the effects of moisture, e.g., by hydrophobic laminated layers.     

What institutional kitchens require of packages

A theme interview study technique was used to investigate the requirements of institutional kitchens on packages. The interviewees included experts in the food and packaging industries as well as workers in staff restaurants and school dining rooms. Packages containing milk, juice, vegetables and convenience food products were studied. This study shows that the packages did not always function in a satisfactory way. The biggest problem seemed to be the weight of the package and the opening mechanism. The workers are mainly female and therefore 20 kg is too heavy for lifting. It is also important that the package can be disposed of easily. A good package is easy to open and reclose. Reclosing, in particular, proved to be problematic. It is important that the package can be reclosed properly. A problem with packages filled with convenience food is that they are often too full and the food boils over hen heated.     

Oxidatively Active Plant Phenolics Detected by UHPLC-DAD-MS after Enzymatic and Alkaline Oxidation

We developed a combination of methods to estimate the alkaline oxidative conditions of the midgut of insect larvae and to reveal the alkaline and enzymatic oxidative activities for individual phenolic compounds present in the larval host plants. First, we monitored the in vitro isomerization of 5-O-caffeoylquinic acid (5-CQA) into 3-CQA, 4-CQA and 5-CQA at pH 9.0–11.0. Then we calculated the isomer ratios of 3-CQA, 4-CQA and 5-CQA from the frass of eight species of insect herbivores fed on foliage containing 5-CQA. The isomer ratios suggested that the midgut pH of these larvae ranged from 9.4 to around 10.1. Second, we developed an in situ enzymatic oxidation method that enabled oxidation of phenolics in a frozen plant sample at 30 °C by species- and tissue-specific enzymes. Then we measured the alkaline and enzymatic oxidative activities of the individual phenolics in 20 plant species by quantifying the proportion of the compound concentration lost due to the auto-oxidation of a plant extract at pH 10 and due to the enzymatic oxidation of the frozen plant sample at 30 °C. Our results showed that both of the oxidative activity types depended primarily on the type of phenolic compound, but the enzymatic oxidative activity depended also on the plant species and tissue type. This combination of methods offers an approach to characterize a wide array of phenolics that are susceptible to oxidation by the plant enzymes and/or by the alkaline conditions estimated to prevail in the insect midgut. We propose that these kinds of compound-specific results could guide future studies on specific plant-herbivore interactions to focus on the phenolics that are likely to be active rather than inactive plant phenolics.