This work focuses on the analysis of pilots’ performance during manual flight operations in different stages of training and their influence on gaze strategy. The secure and safe operation of air traffic is highly dependent on the individual performances of the pilots. Before becoming a pilot, he/she has to acquire a broad set of skills by training to pass all the necessary qualification and licensing standards. A basic skill for every pilot is manual control operations, which is a closed-loop control process with several cross-coupled variables. Even with increased automation in the cockpit, the manual control operations are essential for every pilot as a last resort in the event of automation failure. A key element in the analysis of manual flight operations is the development over time in relation to performance and visual perception. An experiment with 28 participants (including 11 certified pilots) was conducted in a Boeing 737 simulator. For defined flight phases, the dynamic time warping method was applied to evaluate the performance for selected criteria, and eye-tracking methodology was utilized to analyze the gaze-pattern development. The manipulation of workload and individual experience influences the performance and the gaze pattern at the same time. Findings suggest that the increase of workload has an increased influence on pilots depending on the flight phase. Gaze patterns from experienced pilots provide insights into the training requirements of both novices and experts. The connection between workload, performance and gaze pattern is complex and needs to be analyzed under as many differing conditions. The results imply the necessity to evaluate manual flight operations with respect to more flight phases and a detailed selection of performance indications.
The use of patterned media is a new approach proposed to extend the recording densities of hard disk drives beyond 1 Tb/in.2. Bit-patterned media (BPM) overcome the thermal stability problems of conventional media by using single-domain islands for each bit of recorded information, thereby eliminating the magnetic transition noise (Albrecht et al., Magnetic Recording on Patterned Media, 2003). Considering steady state conditions, we have transferred the pattern from the disk surface onto the slider surface and have investigated the pressure generation due to the bit pattern. To reduce the numerical complexity, we have generated the bit pattern only in the areas of the slider near the trailing edge, where the spacing is small. Cylindrical protrusions were modeled using very small mesh size on the order of nanometers to obtain the flying characteristics for the entire slider air bearing surface (ABS) using the “CMRR” finite element Reynolds equation simulator (Duwensee et al., Microsyst Technol, 2006; Wahl et al., STLE Tribol Trans, 39(1), 1996). The effect of pattern height, pattern diameter, slider skew angle, and slider pitch angle on flying height of a typical slider is investigated. Numerical results show that the flying height decreases for a patterned slider and the change in flying height is a function of the pattern height and ratio of the pattern diameter to the pattern pitch. In comparison to discrete track media, the flying height loss is larger for a patterned slider disk interface for the same recessed area of pattern. 相似文献
The so-called Freeze Foaming method aims at manufacturing ceramic cellular scaffolds for diverse applications. One application is dedicated to potential bone replacement material featuring open, micro and interconnected porosity. However, the main challenges of this foaming method is to achieve a homogeneous pore morphology. In a current project, the authors throw light on the bubble/pore and strut formation of this process by in situ computed tomography. This allows for evaluating varying process parameter’s effects on the growth of the ceramic foam during the foaming process. As first result and basis for CT analysis, a stable and reproducible model suspension was developed which resulted in reproducible foam structures. In dependence of selected process parameters like pressure reduction rate or air content in the ceramic suspension resulting Freeze Foams became adjustable with regard to their pore morphology. Pore size and distribution data as well as the porosity were characterized and evaluated accordingly. 相似文献
High-alumina containing high-level waste (HLW) will be vitrified at the Waste Treatment Plant at the Hanford Site. The resulting glasses, high in alumina, will have distinct composition-structure-property (C-S-P) relationships compared to previously studied HLW glasses. These C-S-P relationships determine the processability and product durability of glasses and therefore must be understood. The main purpose of this study is to understand the detailed structural changes caused by Al:Si and (Al + Na):Si substitutions in a simplified nuclear waste model glass (ISG, international simple glass) by combining experimental structural characterizations and molecular dynamics (MD) simulations. The structures of these two series of glasses were characterized by neutron total scattering and 27Al, 23Na, 29Si, and 11B solid-state nuclear magnetic resonance (NMR) spectroscopy. Additionally, MD simulations were used to generate atomistic structural models of the borosilicate glasses and simulation results were validated by the experimental structural data. Short-range (eg, bond distance, coordination number, etc) and medium-range (eg, oxygen speciation, network connectivity, polyhedral linkages) structural features of the borosilicate glasses were systematically investigated as a function of the degree of substitution. The results show that bond distance and coordination number of the cation-oxygen pairs are relatively insensitive to Al:Si and (Al + Na):Si substitutions with the exception of the B-O pair. Additionally, the Al:Si substitution results in an increase in tri-bridging oxygen species, whereas (Al + Na):Si substitution creates nonbridging oxygen species. Charge compensator preferences were found for Si-[NBO] (Na+), [3]B-[NBO] (Na+), [4]B (mostly Ca2+), [4]Al (nearly equally split Na+ and Ca2+), and [6]Zr (mostly Ca2+). The network former-BO-network former linkages preferences were also tabulated; Si-O-Al and Al-O-Al were preferred at the expense of lower Si-O-[3]B and [3]B-O-[3]B linkages. These results provide insights on the structural origins of property changes such as glass-transition temperature caused by the substitutions, providing a basis for future improvements of theoretical and computer simulation models. 相似文献
The use of AC potentials in electrospraying and electrospinning processes was demonstrated. Carboxymethylcellulose (CMC) was electrosprayed onto semiconducting and insulating substrates using both DC and AC potentials. On the semiconducting substrate, both AC and DC methods were capable of producing significant CMC coverage. However, only the AC potential was capable of producing significant coverage on the insulating substrate, possibly due to a reduction in the amount of surface charging. In the electrospinning investigation, poly(ethylene oxide) (PEO) fibers were spun into mats using both DC and AC driving potentials. The AC potential resulted in a significant reduction in the amount of fiber ‘whipping’ and the resulting mats exhibited a higher degree of fiber alignment but were observed to contain more residual solvent. The average fiber diameter for both DC and AC-spun mats exhibited a strong dependence on solution concentration. 相似文献
We evaluated the effects of the rate and volume of tidal ventilation on airway resistance (Raw) during intravenous methacholine (MCh) challenge in mechanically ventilated rabbits. Five rabbits were challenged at tidal volumes of 5, 10, and 20 ml/kg at a frequency of 15 breaths/min and also under static conditions (0 ml/kg tidal volume). Four rabbits were subjected to MCh challenge at frequencies of 6 and 30 breaths/min with a tidal volume of 10 ml/kg and also under static conditions. In both groups, the increase in Raw with MCh challenge was significantly greater under static conditions than during tidal ventilation at any frequency or volume. Increases in the volume or frequency of tidal ventilation resulted in significant decreases in Raw in response to MCh. We conclude that tidal breathing suppresses airway responsiveness in rabbits in vivo. The suppression of narrowing in response to MCh increases as the magnitude of the volume or the frequency of the tidal oscillations is increased. Our findings suggest that the effect of lung volume changes on airway responsiveness in vivo is primarily related to the stretch of airway smooth muscle. 相似文献