High-efficiency hot-electron transport in GaInAs/InP hot electron transistor grown by OMVPE

Improved characteristics of the GaInAs/InP hot electron transistor (HET) fabricated by organo-metallic vapour phase epitaxy (OMVPE) are reported. The common-emitter current gain was 8 for the base thickness of 40 nm at 77 K. This result shows a promising potential for the heterostructure material system of GaInAs/InP for high-speed ballistic electron devices.<>     

Microstructure and electrochemical behavior of Ti-coatedZr55Al10Ni5Cu30 bulk metallic glass

In this study, pure Ti was coated on Zr₅₅Al₁₀Ni₅Cu₃₀ bulk metallic glass (BMG) using a physical vapour deposition (PVD) technique with magnetron sputtering. Microstructures of Ti coating, BMG substrate and interface were investigated by conventional and high-resolution transmission electron microscopy (TEM and HREM). The electrochemical behavior of Ti-coated Zr₅₅Al₁₀Ni₅Cu₃₀ BMG was studied by potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) in Hanks' solution. Scanning electron microscopy (SEM) was used to characterize the surface morphology of the coating after electrochemical testing. HRTEM observation reveals that the sputtering Ti coating consists of α-Ti nano-scale particles with the size about 10 nm. The polarization curves revealed that the open-circuit potential shifted to a more positive potential and the passive current density was lower after Ti coating was applied in comparison with that of the monolithic Zr₅₅Al₁₀Ni₅Cu₃₀ BMG. Electrochemical impedance spectroscopy (EIS) measurements showed that the Bode plots of Ti-coated Zr₅₅Al₁₀Ni₅Cu₃₀ BMG presented one time constant for 1 h and 12 h immersion and two time constants after 24 h immersion. The good bonding condition between Ti coating and Zr₅₅Al₁₀Ni₅Cu₃₀ BMG substrate may be responsible for the high corrosion resistance of Ti-coated Zr₅₅Al₁₀Ni₅Cu₃₀ BMG.     

Formation mechanism of monodispersed spherical core-shell ceria/polymer hybrid nanoparticles

Very unique core-shell ceria (cerium oxide)/polymer hybrid nanoparticles that have monodispersed spherical structures and are easily dispersed in water or alcohol without the need for a dispersant were reported recently. The formation mechanism of the unique nanoparticles, however, was not clear. In order to clarify the formation mechanism, these nanoparticles were prepared using a polyol method (reflux heating) under varied conditions of temperature, time, and concentration and molecular weight of added polymer (poly(vinylpyrrolidone)). The size of the resultant nanoparticles was strongly and complicatedly dependent on the set temperature used during reflux heating and the poly(vinylpyrrolidone) molecular weight. Furthermore, the size of the nanoparticles increased by a 2-step process as the reflux heating time increased. The IR spectral changes with increasing reflux time indicated the increase in the number of cross-linked polymers in the shell. From these results, the formation mechanism was discussed and proposed.     

High speed zinc electrowinning using a hydrogen gas-diffusion electrode

The feasibility of a high speed zinc electrowinning cell using a Pt catalyzed hydrogen gas-diffusion electrode as an anode is investigated. This new type of zinc-winning cell is operated at a current density of 1.0 A cm^–2, which is 20 times higher than usually employed in conventional methods. Current efficiency is 86% at 0.5 A cm^–2 in an electrolyte containing 60 gl^–1 Zn+270 gl^–1 H₂SO₄, the zinc purity being at least 99.999%. The energy usage of the system is 1400 kWh and 380 m³ H₂ gas per ton of zinc.     

Synthesis of Succinic Gemini Surfactants and the Effect of Stereochemistry on Their Monolayer Behaviors

In this work, succinic gemini surfactants, dl‐ and meso‐2,3‐bis(alkyl)succinic acids (alkyl: C₆H₁₃–C₁₃H₂₇), were successfully synthesized by oxidative coupling of enolates of fatty acid tert‐butyl esters with copper(II) bromide followed by treatment with CF₃COOH. Focusing on the influence of stereochemistry (dl‐ and meso‐) of succinic geminis, their monolayer behaviors at the air–water interface were explored using surface pressure–area (Π–A) isotherms, the compression modulus of monolayers (ε_s), and Brewster angle microscope (BAM) analysis. meso‐2,3‐Bis(undecyl)succinic acid showed a unique isotherm where the surface pressure drastically decreased at A = ~0.56 nm² (Π = 21.9 mN m^?1) regardless of compression rates and subphase temperatures, while dl‐isomer showed the common isotherm of gas → liquid‐expanded → liquid‐condensed phase transitions. BAM analysis on meso‐2,3‐bis(undecyl)succinic acid films at the air–water interface showed that small islands of aggregates appear just after the maximum pressure (A = ~0.56 nm²), and on further compression needle‐shaped assemblies appear that can grow in size. It was reasonably concluded that hydrophobic interactions can operate more effectively in meso‐isomers than in dl‐isomers, and that meso‐molecules can “jump up” to cause a transition from monolayer to bilayer. This is the first finding of the “jumping‐up” phenomenon of gemini surfactants having meso‐stereochemistry.     

Deuterium NMR analysis of dimer liquid crystals

Summary Deuterium NMR measurements have been performed for dimer liquid crystals (DLC) having structures such as NC-O(CH₂)_nO-CN (CBA) with n=9, 10. Fully deuterated CBAs with n=9 and 10 exhibit, respectively, three and four splittings in the D-NMR spectra. By using partially deuterated samples, the signals corresponding to the largest splittings were found to include contributions from the - and -CD₂ groups. The origins of the rest of the signals were elucidated by the RIS method previously established. Characteristic properties of the nematic mesophase were estimated for CBA-10. The results were found to be consistent with those of the previous analysis on Griffin et al.'s DLC.     

Propagation of “small fatigue crack” initiated from notch-root

Recently, early stage of initiated fatigue crack propagation, so-called, “small crack” propagation behavior from notch-root is becoming more and more important for the developement of improved prediction of fatigue life of structural components. In the present paper, fine-grid-method which was already presented in the previous paper was applied to this problem. Special attention was given to the crack-tip strain changes of “small crack” engulfed in the plastic field of the notch. The relationship between fatigue crack propagation rate, $\text{da}\text{dN}$, and stress intensity factor range, ΔK, as well as local crack-tip strain range, Δ?^T, which was previously proposed by the authors were investigated.     

New scheme for calculation of annular dark-field STEM image including both elastically diffracted and TDS waves

A new scheme of calculation of high-angle annular dark-field STEM image, capable of including both elastically diffracted and thermal diffuse scattering waves, has been presented by a combination of Pennycook's and Nakamura's methods. The new scheme has been demonstrated for image simulations of Si(011) as functions of thickness, defocus values and detector angles. In the present method, the TDS electron intensities are treated in the same way as in Pennycook's method, having a clear physical picture of its origin and reflecting the atom configuration in the systems. For the case of Si(011), it has been confirmed that at the detector angle of 60 to 160 mrad, which is usually applied, the image becomes highly incoherent, and even the image formed only from SOLZ beams becomes incoherent at the detector angle. At a low detector angle, however, the image has coherent features indicating the necessity of a simulation for individual systems.     

Molecular characterization of Xenopus embryo heparan sulfate. Differential structural requirements for the specific binding to basic fibroblast growth factor and follistatin

Enzymatic elimination of heparan sulfate (HS) causes abnormal mesodermal and neural formation in Xenopus embryos, and HS plays an indispensable role in establishing the embryogenesis and tissue morphogenesis during early Xenopus development (Furuya, S., Sera, M., Tohno-oka, R., Sugahara, K., Shiokawa, K., and Hirabayashi, Y. (1995) Dev. Growth Differ. 37, 337-346). In this study, HS was purified from Xenopus embryos to investigate its disaccharide composition and binding ability to basic fibroblast growth factor (bFGF) and follistatin (FS), the latter being provided in two isoforms with core sequences of 315 and 288 amino acids (designated FS-315 and FS-288) originating from alternative mRNA splicing. Disaccharide composition analysis of the purified Xenopus HS showed the preponderance of a disulfated disaccharide unit with uronic acid 2-O-sulfate and glucosamine 2-N-sulfate, which has been implicated in the interactions with bFGF. Specific binding of the HS to bFGF and FS-288, the COOH-terminal truncated form, was observed in the filter binding assay, whereas HS did not bind to FS-315, indicating that the acidic Glu-rich domain of FS-315 precluded the binding. The binding of the HS to bFGF or FS-288 was markedly inhibited by heparin (HP) and various HS preparations, but not by chondroitin sulfate, supporting the binding specificity of HS. The binding specificity was further investigated using FS-288 and bovine intestinal [3H]HS. Competitive inhibition assays of the HS binding to FS-288 using size-defined HP oligosaccharides revealed that the minimum size required for significant inhibition was a dodecasaccharide, which is larger than the pentasaccharide required for bFGF binding. The binding affinity of FS to HS increased in the presence of activin, a growth/differentiation factor, which could be inactivated by direct binding to FS. These results, taken together, indicate that the structural requirement for binding of HS to bFGF and FS is different. HS may undergo dynamic changes in its structure during early Xenopus embryogenesis in response to the temporal and spatial expression of various growth/differentiation factors.     

Direct modulation characteristics of GaInAsP/InP d.h. lasers with various stripe widths measured by sharp-pulse method

The direct modulation characteristics of GaInAsP/InP d.h. lasers emitting at 1.3 ?m with various stripe widths were measured by the proposed sharp-pulse method. As a result, a flat modulation frequency response up to 1.9 GHz was observed in a laser diode with 5 ?m stripe width.