一种改进的Ribbon snake遥感图像道路网自动生成算法

针对树木或高大建筑物遮挡以及噪声等因素造成道路提取结果不完整的现象,根据道路的几何特征,在Snake模型中加入道路宽度信息,构造Ribbon Snake模型。为了克服模型对内部参数依赖性较大、容易受到复杂背景干扰影响的不足,采用B样条曲线对道路的平滑性进行约束,与Ribbon Snake相结合建立道路提取算法,通过调节控制点的数目增强曲线的灵活性。从改进的B样条Ribbon Snake的道路网分割结果可以看出,分割的结果更加平滑,精度更高,对噪声具有更好的鲁棒性。     

Impact of Viscoelasticity on the Tribological Behavior of PTFE Composites for Valve Seals Application

In this article, we studied and explored the impact of viscoelasticity on the friction and wear behavior of pure polytetrafluoroethylene (PTFE), carbon–graphite PTFE composite, and glass fiber–MoS₂ PTFE composite. Tests were carried out using a specific reciprocating tribometer for valve seal application. The worn surfaces of the PTFE composites and the transfer films formed on the counterface were examined with a scanning electron microscope (SEM). Experimental results revealed that the addition of filler materials was effective in reducing the wear volume in all composites studied. In addition, the friction coefficient and wear resistance showed high sensitivity to the viscoelastic behavior of the PTFE seal. SEM investigation showed that the incorporation of particulate fillers into the PTFE matrix could dramatically reduce and stabilize the transfer films to the counterface, so they largely decreased the wear of the PTFE composites.     

Improving the performance of a proportional 4/3 water–hydraulic valve by using a diamond-like-carbon coating

Today, there are several water–hydraulic, power-control systems already available on the market. Their components are usually made of stainless steel, which ensures satisfactory performance under mild, conventional operating conditions. However, for more demanding operating conditions and long-term, low-friction and low-wear performance, they do not provide the required performance. One of the possible ways to improve the performance of stainless-steel components in water–hydraulic systems is to coat them with diamond-like carbon (DLC), since this material is well known for its excellent low-friction and low-wear characteristics and also provides very good performance under water-lubrication conditions. In this study, real-scale lifetime tests with 2.3 million cycles were performed on a hydraulic test rig with a proportional 4/3 directional control water–hydraulic valve. Two types of contacts in the valve were tested: the steel-spool/steel-sleeve and the DLC-spool/steel-sleeve. The wear behaviour of the valve was evaluated with a scanning electron microscope (SEM) and internal leakage measurements. In the real-scale lifetime tests the wear and the damage on the DLC-coated spool were significantly lower than on the steel spool. Furthermore, in agreement with this, the internal leakage in the DLC-spool/steel-sleeve valve was almost constant throughout the tests, while in the steel-spool/steel-sleeve valve the leakage slowly, but steadily, increased. The steel/steel and DLC/steel contacts were also separately evaluated in pin-on-disc model tribological tests under water-lubricated conditions for a comparison and for a better understanding of the tribological mechanisms. In agreement with the real-scale tests, the DLC/steel contact showed improved friction and wear performance in comparison with the steel/steel contact.     

Prediction of surface characteristics obtained by burnishing

To reduce the irregularities of machined surface, burnishing is used as a finishing process by plastic deformation. This process does not only improve surface finish but also generates compressive residual stresses throughout the surface. In this work, an analytical study and a finite element modelling were performed to provide a fundamental understanding of the burnishing on an AISI 1042 workpiece. The analytical results were concentrated on the surface roughness and on some burnishing parameter effects. The simulations were devoted to the study of the surface profile, the residual stresses and the influence of burnishing parameters (penetration depth, feed rates, diameter of the ball of burnishing tool and initial surface quality) on surface roughness and the residual stress distribution. It has been noted that burnishing improves surface quality and introduces compressive residual stresses. These results were successfully compared to experimental data obtained in previous works.     

Fermentation of date palm juice by curdlan gum production from Rhizobium radiobacter ATCC 6466™: Purification, rheological and physico-chemical characterization

The present study was undertaken to investigate the possibility of using date palm juice byproducts for curdlan production by Rhizobium radiobacter ATCC 6466™ in batch experiments. A number of operational parameters, namely pH value, temperature range, inoculum ratio, agitation speed, carbon concentration, nitrogen source, and fermentation time, were investigated in terms of their optimal values for as well as individual and synergistic effects on curdlan production. The findings indicated that the strain exhibited a high ability to use the natural substrate under investigation. A curdlan production yield of 22.83 g/l was obtained in 500-ml agitated flasks (50 ml) when the strain was cultivated in the optimal medium (pH, 7; ammonium sulphate concentration, 2 g/l; date glucose juice concentration, 120 g/l) operating at 30 °C with an inoculum ratio of 5 ml/100 ml, an agitation speed of 180 rpm, and a fermentation period of 51 h. The purified date byproducts-curdlan (DBP-curdlan) had a molecular weight of 180 kDa, a linear structure composed exclusively of β-(1,3)-glucosidic linkages, a melting temperature (T_m) and glass transition temperature (T_g) of 1.24 and −3.55 °C, respectively. The average measured heights of its molecules were noted to fluctuate between 14.1 ± 0.07 and 211.73 ± 0.6 μm.     

Energy and drying time optimization of convective drying: Taguchi and LBM methods

In this study, a novel method for numerical simulation of drying is proposed and the process is optimized by Taguchi method. A 2D numerical solution is performed to analyze coupled heat and mass transfer occurring during drying of a rectangular moist object. The dryer section and the moist object are conjugately simulated where the coupled heat and mass transfer equations are solved together. The lattice Boltzmann method is employed to solve hydrodynamic, heat, and mass transfer equations. This study applied the Taguchi method to determine optimum conditions for drying so as to minimize the drying time and energy consumption. The control factors included temperature, air velocity, and thickness ratio (the moist object thickness to channel width). The following optimal conditions were obtained: temperature (T?=?60?°C), velocity (V?=?0.1 m/s), and thickness ratio (TR =0.1). The results of numerical solution are then compared to the measured data available in the literature, presenting a reasonable agreement.     

Effects of azadirachtin on post-embryonic development, energy reserves and α-amylase activity of Plodia interpunctella Hübner (Lepidoptera: Pyralidae)

The effects of azadirachtin on the fourth instar larvae of Plodia interpunctella (Lepidoptera) were investigated. When incorporated into the diet at 2 and 4 ppm, azadirachtin provoked larval weight loss, developmental delay and high larval and pupal mortality. Spectrophotometric assays showed that azadirachtin caused a severe reduction in protein, glycogen and lipid contents 7 days after the beginning of the treatment. In addition, α-amylase activity was reduced in larvaefed azadirachtin.     

Satellite image segmentation using hybrid variable genetic algorithm

Image segmentation is an important task in image processing and analysis. Many segmentation methods have been used to segment satellite images. The success of each method depends on the characteristics of the acquired image such as resolution limitations and on the percentage of imperfections in the process of image acquisition due to noise. Many of these methods require a priori knowledge which is difficult to obtain. Some of them are parametric statistical methods that use many parameters which are dependent on image property. In this article, a new unsupervised nonparametric method is developed to segment satellite images into homogeneous regions without any a priori knowledge. The new method is called hybrid variable genetic algorithm (HVGA). The variability is found in the variable number of cluster centers and in the changeable mutation rate. In addition, this new method uses different heuristic processes to increase the efficiency of genetic algorithm in avoiding local optimal solutions. Experiments performed on two different satellite images (Landsat and Spot) proved the high accuracy and efficiency of HVGA compared with another two unsupervised and nonparametric segmentation methods genetic algorithm (GA) and self‐organizing map (SOM). The verification of the results included stability and accuracy measurements using an evaluation method implemented from the functional model (FM) and field surveys. © 2009 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 19, 199–207, 2009