A kinetic study of xylose recovery from a hemicellulose-rich biomass for xylitol fermentative production

Hemicellulose in the complex structure of lignocellulosic substances is mainly composed of xylan which is a polymer based on monosaccharide xylose. Using acidic or enzymatic hydrolysis, hemicellulose can be depolymerized into its constituent monomer. The kinetics of hemicellulose depolymerization and decomposition in oat hull was investigated under moderate pressures with catalyst (H₂SO₄) concentration up to 0.55?N and temperatures of up to 130?°C for a total residence time of 150?min. Different trends of recovery or generation and kinetic mechanisms obtained for the components in the hydrolysate which could be described by different kinetic models, that is, a single-phase kinetic mechanism with product decomposition (two-step sequential reaction) could describe xylose generation. However, generation of arabinose, furfural, and acetic acid followed a single-phase mechanism with no decomposition (one-step reaction). Generation of glucose in the hydrolysate followed a biphasic mechanism due to the fast- and slow-releasing fractions into the liquid phase which was apparently with no decomposition. A pentose recovery of almost 80% was achieved under optimal conditions. Parameters of xylitol bioproduction indicated that a xylitol/xylose conversion yield of 0.80?g/g is achievable from the concentrated hydrolysate with no complementary treatment proving its low toxicity compared to other hemicellulose resources.     

Textile with immobilised nano titanium dioxide for repeated discoloration of CI Reactive Black 5 under UV‐A

A commercially available catalyst with high photocatalytic activity (Degussa p‐25) was immobilised on a comparatively inexpensive substrate that included cotton/polyester knitted fabric by citric acid under sonication. Scanning electron microscopy and energy‐dispersive X‐ray spectroscopy analysis revealed the presence of nano titanium dioxide on the surface of the fabric. Discoloration of CI Reactive Black 5 in aqueous solution was successfully carried out by adding a piece of nano titanium dioxide‐treated fabric into the dye solution under UV‐A irradiation. The ultraviolet–visible spectra indicated complete discoloration of CI Reactive Black 5 dye solutions. CI Reactive Black 5 solution, along with electrolytes including sodium sulphate and calcium carbonate, was also successfully discoloured with lower efficiency. Further, the photocatalytic properties of the nano titanium dioxide‐immobilised fabric did not change after dye solution discoloration and it was used several times for discoloration of the same solutions. The proposed system can be developed on a large scale.     

Photoluminescence emission of nanoporous anodic aluminum oxide films prepared in phosphoric acid

The photoluminescence emission of nanoporous anodic aluminum oxide films formed in phosphoric acid is studied in order to explore their defect-based subband electronic structure. Different excitation wavelengths are used to identify most of the details of the subband states. The films are produced under different anodizing conditions to optimize their emission in the visible range. Scanning electron microscopy investigations confirm pore formation in the produced layers. Gaussian analysis of the emission data indicates that subband states change with anodizing parameters, and various point defects can be formed both in the bulk and on the surface of these nanoporous layers during anodizing.     

Cost optimization of a combined power and water desalination plant with exergetic,environment and reliability consideration

The present study deals with the multi-objective optimization for designing a combined gas turbine and multi stage flash desalination plant. In optimization approach, the exergetic, economic and environmental aspects have been considered, simultaneously. In order to achieve the optimal design, Multi-objective genetic algorithm (MOGA) is applied as a suitable optimization technique. The thermoenvironomic objective function is obtained by integrating the environmental impacts and thermoeconomic objective. By applying the optimization approach, this objective function is minimized, whereas system exergy efficiency is maximized. Moreover, equipment reliability using the state-space and the continuous Markov method is incorporated in optimization results to improve the products' cost values. The optimization results show that the cost of products and environmental cost impact are reduced by 13.4% and 53.4%, respectively, whereas a 14.8% increase happens in total exergy efficiency. Therefore, improvement in all objectives has been achieved using the optimization process, although the power and water productions have not changed much. Additionally, the sensitivity analysis shows the relationship between the fuel cost, pollution damage cost and the objective functions.     

Pure Hydrogen and Propylene Coproduction in Catalytic Membrane Reactor-Assisted Propane Dehydrogenation

Propane dehydrogenation on a commercial Pt-Sn/Al₂O₃ catalyst in a Pd-Ag membrane reactor is considered. A mathematical model is developed to evaluate the performance of the catalytic membrane reactor for the process of propane dehydrogenation. Design and operating conditions are systematically evaluated for key performance metrics such as propane conversion, propylene selectivity, hydrogen selectivity, and hydrogen recovery under different operating conditions. The results confirm that the high performance of the membrane reactor is related to the continuous removal of hydrogen from the reaction zone to shift the reaction equilibrium towards the formation of more propylene and hydrogen.     

Temperature/pH/magnetic triple‐sensitive nanogel–hydrogel nanocomposite for release of anticancer drug

Hydrogels, nanogels and nanocomposites show increasing potential for application in drug delivery systems due to their good chemical and physical properties. Therefore, we were encouraged to combine them to produce a new compound with unique properties for a long‐term drug release system. In this regard, the design and application of a nanocomposite hydrogel containing entrapped nanogel for drug delivery are demonstrated. To this aim, we first prepared an iron oxide nanocomposite nanogel based on poly(N‐isopropylacrylamide)‐co‐((2‐dimethylaminoethyl) methacrylate) (PNIPAM‐co‐PDMA) grafted onto sodium alginate (NaAlg) as a biocompatible polymer and iron oxide nanoparticles (ION) as nanometric base (PND/ION‐NG). This was then added into a solution of PDMA grafted onto NaAlg. Through dropwise addition of mixed aqueous solution of iron salts into the prepared polymeric solution, a novel hydrogel nanocomposite with excellent pH, thermal and magnetic responsivity was fabricated. The synthesized samples were fully characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy with energy‐dispersive X‐ray analysis, vibrating sample magnetometry and atomic force microscopy. A mechanism for the formation of PNIPAM‐co‐PDMA/NaAlg‐ION nanogel–PDMA/NaAlg‐ION hydrogel and PND/ION nanogel is suggested. Swelling capacity was measured at various temperatures (25 to 45 °C), pH values (from 2 to 11) and magnetic field and under load (0.3 psi) and the dependence of swelling properties of the nanogel–hydrogel nanocomposite on these factors was well demonstrated. The release rate of doxorubicin hydrochloride (DOX) as an anticancer drug was studied at different pH values and temperatures in the presence and absence of a magnetic field. The results showed that these factors have a high impact on drug release from this nanocomposite. The result showed that DOX release could be sustained for up to 12.5 days from these nanocomposite hydrogels, significantly longer than that achievable using the constituent hydrogel or nanogel alone (<1 day). The results indicated that the nanogel–hydrogel nanocomposite can serve as a novel nanocarrier for anticancer drug delivery. © 2019 Society of Chemical Industry     

Development of Pure Poly Vinyl Chloride (PVC) with Excellent 3D Printability and Macro- and Micro-Structural Properties

Unmodified polyvinyl chloride (PVC) has low thermal stability and high hardness. Therefore, using plasticizers as well as thermal stabilizers is inevitable, while it causes serious environmental and health issues. In this work, for the first time, pure food-grade PVC with potential biomedical applications is processed and 3D printed. Samples are successfully 3D printed using different printing parameters, including velocity, raster angle, nozzle diameter, and layer thickness, and their mechanical properties are investigated in compression, bending, and tension modes. Scanning electron microscopy is also used to evaluate the bonding and microstructure of the printed layers. Among the mentioned printing parameters, raster angle and printing velocity influence the mechanical properties significantly, whereas the layer thickness and nozzle diameter has a little effect. Images from scanning electron microscopy  also reveal that printing velocity greatly affects the final part's quality regarding defective voids and rasters’ bonding. The maximum tensile strength of 88.55 MPa is achieved, which implies the superiority of 3D-printed PVC mechanical properties compared to other commercial filaments. This study opens an avenue to additively manufacture PVC that is the second most-consumed polymer with cost-effective and high-strength features.     

4D Printing of Polyvinyl Chloride (PVC): A Detailed Analysis of Microstructure,Programming, and Shape Memory Performance

In this research, polyvinyl chloride (PVC) with excellent shape-memory effects is 4D printed via fused deposition modeling (FDM) technology. An experimental procedure for successful 3D printing of lab-made filament from PVC granules is introduced. Macro- and microstructural features of 3D printed PVC are investigated by means of wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), and dynamic mechanical thermal analysis (DMTA) techniques. A promising shape-memory feature of PVC is hypothesized from the presence of small close imperfect thermodynamically stable crystallites as physical crosslinks, which are further reinforced by mesomorphs and possibly molecular entanglement. A detailed analysis of shape fixity and shape recovery performance of 3D printed PVC is carried out considering three programming scenarios of cold (T_g −45 °C), warm (T_g −15 °C), and hot (T_g +15 °C) and two load holding times of 0 s, and 600 s under three-point bending and compression modes. Extensive insightful discussions are presented, and in conclusion, shape-memory effects are promising,ranging from 83.24% to 100%. Due to the absence of similar results in the specialized literature, this paper is likely to fill a gap in the state-of-the-art shape-memory materials library for 4D printing, and provide pertinent results that are instrumental in the 3D printing of shape-memory PVC-based structures.     

Effect of Different Cosolvents on Transesterification of Waste Cooking Oil in a Microreactor

Biodiesel was prepared from waste cooking oil combined with methanol. The process was performed via transesterification in a microreactor using kettle limescale as a heterogeneous catalyst and various cosolvents under different conditions. n‐Hexane and tetrahydrofuran were selected as cosolvents to investigate fatty acid methyl esters (FAMEs). To optimize the reaction conditions, the main parameters affecting FAME% including reaction temperature, catalyst concentration, oil‐to‐methanol volumetric ratio, and cosolvent‐to‐methanol volumetric ratio were studied via response surface methodology. Under optimal reaction conditions and in the presence of the cosolvents n‐hexane and tetrahydrofuran, high FAME purities were achieved. Considering the experimental results, the limescale catalyst is a unique material, and the cosolvent method can reduce significantly the reaction time and biodiesel production cost.