The role of grain orientation in microstructure evolution of pure aluminum processed by equal channel angular pressing

A new approach describing the role of crystallographic orientation in the microstructural refinement of commercially pure aluminum during the successive passes of equal channel angular pressing (ECAP) is introduced. The study is based on analysis of X-ray diffraction texture data that is used to calculate the geometrical position of crystallographic slip planes with respect to the shearing plane of the ECAP die. The angular deviations of {111} slip planes from the macroscopic deformation plane for different processing routes were calculated and compared. The microstructure evolution was investigated using electron back-scattered diffraction (EBSD). The grain size and grain boundary character distribution obtained for each processing route are related to the angles between {111} planes and the shearing plane. It was shown that the more effective routes in grain refinement have higher angles between {111} slip planes and the shearing plane.     

Controllable Synthesis of NiSe<Subscript>2</Subscript> Nanostructures via Hydrothermal Process for Photocatalytic and Solar Cell Applications

This paper reports on the synthesis of rice-like NiSe₂ nanoparticles via a simple hydrothermal method by employing [bis(2-hydoxyacetophenato)nickle(II)], [Ni(HAP)₂], as a novel nickel precursor. Effect of nickel source on morphology and size of nanostructures was also investigated. Moreover, the as-synthesized NiSe₂ nanostructures were utilized as the photocatalyst for the degradation of methylene blue (MB) and as the counter electrode in dye-sensitized solar cells. The results showed that structures size and morphology have salient effect on solar cells and using rice-like NiSe₂ nanoparticles leads to an increase in DSSCs efficiency compared to agglomerated sphere-like particles from 6.04 to 8.99?% (~49?% improvement).     

Novel Fault Management Framework Using Markov Chain in Wireless Sensor Networks: FMMC

Wireless Personal Communications - Due to using wireless sensor nodes (WSNs) in inaccessible areas and applying limitations in making nodes to reduce costs, these networks are prone to faults. The...     

TSAT is a better predictor than ferritin of hemoglobin response to Epoetin alfa in US dialysis patients

Clinical guidelines recommend concurrent treatment of anemia in end‐stage renal disease with erythropoiesis‐stimulating agents (ESAs) and iron. However, there are mixed data about optimal iron supplementation. To help address this gap, the relationship between iron markers and hemoglobin (Hb) response to ESA (Epoetin alfa) dose was examined. Electronic medical records of 1902 US chronic hemodialysis patients were analyzed over a 12‐month period between June 2009 and June 2010. The analysis included patients who had at least one Hb value during each 4‐week interval for four consecutive intervals (k ? 2, k ? 1, k, and k + 1; k is the index interval), received at least one ESA dose during intervals k ? 1 or k, had at least one transferrin saturation (TSAT) value at interval k, and at least one ferritin value during intervals k ? 2, k ? 1, or k. Effect modification by TSAT and ferritin on Hb response was evaluated using the generalized estimating equations approach. Patients had a mean (standard deviation) age of 62 (15) years; 41% were Caucasian, 34% African American, 65% had hypertension, and 39% diabetes. Transferrin saturation, but not ferritin, had a statistically significant (P < 0.05) modifying effect on Hb response. Maximum Hb response was achieved when TSAT was 34%, with minimal incremental effect beyond these levels. Of the two standard clinical iron markers, TSAT should be used as the primary marker of the modifying effect of iron on Hb response to ESA. Long‐term safety of iron use to improve Hb response to ESA warrants further study.     

Exergetic and environmental performance improvement in cement production process by driving force distribution

This paper presents an investigation of the effects of temperature gradient distribution by the aid of a secondary burner on exergetic and environmental functions of the cement production process. For this reason, the burning system of the cement production (kiln &; preheater) process was simulated in four thermal areas. Three lines of cement production with 2,000, 2,300 and 2,600 ton/day were investigated. Fuel injection ratio into the secondary burner, from 10 to 40 percent was studied for each line. The obtained results show that, for cyclone preheaters, fuel injection into the secondary burner up to a proportion resulting in the minimum temperature required for alite formation (2,200 °C) in the kiln burning zone is suitable. For shaft preheaters, however, according to percent calcinations, there exists an optimum proportion for 15 to 20 percent injection fuel into secondary burner. Finally, it was shown that the secondary burner application can reduce the exergy losses about 25 percent, which leads to a reduction of the green house gases of about 35000 cubic meters per year for each ton per day of clinker production.     

Determination of residual organic matter in extracted oil sands using a low temperature ashing method

The application of a low temperature ashing method for estimating total residual organic matter (toluene insolubles) in oil sands is described. A linear correlation exists between organic carbon content and loss on ignition at 400 ± 10 °C of solvent extracted oil sands. The ratio between total organic carbon and the weight loss on ignition (CT/LOl) owing to the removal of residual organic matter is much lower than that obtained for toluene soluble bitumen fractions, indicating very different chemical composition for the residual organic matter. The measured carbon content of the residual organic matter in oil sands suggests that this material could be a mixture of various fractions contained in resins, asphaltenes, asphaltic acids and humic acids.     

Tensile behavior change depending on the varying tungsten content of W–Ni–Fe alloys

Tungsten heavy alloys (WHAs) are metal–metal composites consisting of nearly pure spherical tungsten particles embedded in a Ni–Fe–W or Ni–Co–W or Ni–Cu–W ductile matrix. In this dual phase alloy, there are several complicated relations between the ductile matrix and hard tungsten particles. The aim of this research was to examine the effect of varying tungsten content on the microstructure and mechanical properties of tungsten heavy alloys. The microstructural parameters (grain size, connectivity, contiguity and solid volume fraction) were measured and were found to have a significant effect on the mechanical properties of tungsten-based heavy alloys. The result shows that the binding strength between the W and the matrix phase has a major influence on the ductility of tungsten-based alloys. The larger this binding force is, the better the ductility is.     

On physical and antibacterial properties and drug release behavior of poly(vinyl alcohol) hydrogels: effect of drug loaded chitosan nanoparticles

This paper deals with influence of chitosan nanoparticles (CNPs) loaded by tetracycline, as a drug, on the physico-mechanical and antibacterial properties as well as drug release behavior of poly(vinyl alcohol), PVA, hydrogels prepared by electron beam irradiation. The formation of spherical chitosan particles in nanoscale size prepared by an ionic gelation method was confirmed by FTIR and UV spectroscopy, and scanning electron microscopy analyses. The drug release kinetic studies from drug loaded chitosan nanoparticles (DLCNPs) at pH = 7.4 revealed a linear and steady release behavior over long period of time. The theoretical analysis of the swelling kinetic data, using Peppas’s model showed that the swelling kinetic is governed by Fickian diffusion for all the prepared hydrogels, however, the water diffusion coefficient, and therefore, the swelling content were lower for the hydrogels loaded with DLCNPs as compared to the ones with the neat drug. In agreement with these results, the hydrogels containing DLCNPs exhibited a more controlled drug release behavior with significantly stronger antibacterial activity. The tensile mechanical properties of the hydrogels not affected by the DLCNPs were found to be suitable for wound dressing applications.