N-3 Polyunsaturated Fatty Acids Modulate In-Vitro T Cell Function in Type I Diabetic Patients

In this work, we assessed the in-vitro effects of eicosapentaenoic acid (EPA; C20:5n-3) and docosahexaenoic acid (DHA; C22:6n-3) (final concentration, 15 microM) on T cell blastogenesis, interleukin-2 and -4 (IL-2, IL-4) secretion, fatty acid composition and intracellular oxidative status in type I diabetic patients with or without complications. Con A stimulated lymphocyte proliferation, glucose uptake, intracellular reduced glutathione levels and catalase activity were lower in diabetics as compared to controls, regardless to the presence of complications. EPA and DHA diminished T-lymphocyte proliferation and IL-2 production but enhanced IL-4 secretion in both diabetic and control groups. No changes in the levels of reduced glutathione and in the activities of catalase and SOD were observed in control T cells cultured in the presence of EPA and DHA. However, in diabetic patients, addition of n-3 PUFA to culture induced an increase in T cell levels of reduced glutathione and hydroperoxide, and in activities of catalase and SOD. Low levels of arachidonic acid (C20:4n-6) were found in plasma membrane phospholipids of lymphocytes from diabetic patients compared to controls. Incubation of lymphocytes with EPA and DHA was associated with an incorporation of these fatty acids in membrane phospholipids. In conclusion, the beneficial effects of n-3 PUFA on T cell functions in type I diabetes could be attributed to their suppressive action and modulation of cytokine secretion, and to the improvement of intracellular oxidative status.     

Synthesis,Characterization, and Bioactivity Evaluation of Amorphous and Crystallized 58S Bioglass Nanopowders

The aim of this work was synthesis and characterization of amorphous and crystallized 58S nanopowders produced via sol‐gel method. According to the thermal analysis, the nanopowders were heat‐treated at 600°C and 1100°C. X‐ray diffraction results revealed that the phases of Wollastonite and tricalcium phosphate were formed at 1100°C. The in vitro tests showed that hydroxyl carbonate apatite was precipitated on both crystallized and amorphous nanopowders, while amorphous nanopowder showed a higher bioactivity than that of crystallized nanopowder. In contrast, mechanical properties of crystallized specimen were higher than those of amorphous specimen.     

Amino Functionalized Nano Fe3O4@SiO2 as a Magnetically Green Catalyst for the One-Pot Synthesis of Spirooxindoles Under Mild Conditions

(3-Aminopropyl)-triethoxysilane attached to Fe₃O₄@SiO₂ nanoparticles has been characterized by powder X-ray diffraction, vibrating sample magnetometer, scanning electronic microscope, transmission electron microscope, energy dispersive X-ray, thermal gravimetric analysis, and Fourier transform infrared spectroscopy. The prepared nanoparticles employed as a heterogeneous catalyst in the synthesis of spirooxindoles derivatives in one-pot four-component reactions of isatin, methyl cyanoacetate or malononitrile, hydrazine hydrate, and ethyl acetoacetate. Amino-functionalized magnetic nanoparticles showed high catalytic activity in mild reaction conditions and excellent yields of products in short reaction times. Also, this nanocatalyst can be easily recovered by a magnet and reused for subsequent reactions for at least 5 times without noticeable loss in catalytic activity.     

Role of Nd-Ni on structural,spectral and dielectric properties of strontium-barium based nano-sized X-type ferrites

The influence of neodymium and nickel substitution on structural and dielectric parameters was investigated in strontium-barium X-type hexagonal ferrites having composition SrBaCu_2?xNi_xNd_yFe_28?yO₄₆ (x = 0, 0.2, 0.4, 0.6, 0.8, 1 and y = 0, 0.02, 0.04, 0.06, 0.08, 0.1). Sol-gel method was employed for synthesizing these hexagonal ferrites. The XRD plots of all studied materials which were annealed at 1250 °C show single phase characteristics. Lattice parameter ‘c’ increased as a consequence of larger radius of rare earth ion (Nd³⁺) as compared to (Fe³⁺), while lattice parameter ‘a’ showed very small variation. The cell volume was obtained in the range 2508.32–2523.75 (ų). The inclusion of Nd-Ni also affected X-ray density, bulk density and porosity. The FTIR spectroscopy indicated the particular absorption peaks of hexagonal ferrites and it was performed in the range of 500–700 cm^?1. On account of Nd-Ni doping, the dielectric constant, dielectric loss and AC-conductivity showed decreasing trend. The occupancy of Nd³⁺ ions at octahedral site impedes the valence alternation of Fe³⁺; therefore there was decrease in dielectric permittivity. Ac conductivity has been decreased from 9.14 to 6.49 (Ω cm)^?1 at frequency of 2.7 GHz. The Cole-Cole plots of synthesized materials noticeably revealed grain boundary contribution. The appearance of single semi-circle in impedance Cole-Cole graphs confirms the exceptional role of grain boundaries in the conduction process. The considerably lower dielectric parameters of investigated nano X-type ferrites propose their feasibility for high-frequency applications (phase shifters, dielectric resonators, stealth technology etc).     

Electrophoretic deposition of titanium nitride coatings

Electrophoretic deposition of the titanium nitride (TiN) coatings from suspensions prepared by dispersion of TiN particles in triethanolamine (TEA) containing butanol medium was studied. Effects of the TiN particles concentration (C_TiN) on the weight of the deposited coatings, triethanolamine concentration (C_TEA=0.25, 0.5, 0.75, and 1 mL/L) on the Zeta potential of the TiN particles, suspension electrical conductivity and pH, as well as effects of the deposition voltage (V_d=60, 90, and 120 V) and time (t_d =1, 2, and 3 minutes) on the microstructure and thickness of the deposited coatings were investigated. Variations in deposition current density, effective deposition voltage, electrical resistance, and deposited coating weight versus deposition time were recorded. The morphology of the as‐dried coatings was studied using Scanning Electron Microscope (SEM). The results indicated that by increasing the C_TiN the weight of deposits increases linearly up to 40 g/L. For suspensions containing C_TiN=40 g/L, the optimum C_TEA is obtained to be 0.5 mL/L leading to Zeta potential of 43.25 mV. Uniform and crack‐free as‐dried coatings obtained at V_d and t_d of 90 V and 2 minutes, respectively.     

Delignification of intact biomass and cellulosic coproduct of acid‐catalyzed hydrolysis

The kinetics of acid‐catalyzed hemicellulose removal and also alkaline delignification of oat hull biomass were investigated. All three operational parameters namely, catalyst concentration (0.10–0.55 N H₂SO₄), temperature (110–130°C), and residence time (up to 150 min) affected the efficiency of hemicellulose removal, with 100% of hemicellulose removed by appropriate selection of process parameters. Analysis of delignification kinetics (in the temperature range of 30–100°C) indicated that it can be expressed very well by a two‐phase model for the crude biomass and also for the hemicellulose‐prehydrolyzed material. The application of acid‐catalyzed prehydrolysis improved the capacity of lignin dissolution especially at lower temperatures (30 and 65°C) and accelerated the dissolution of lignin. This acceleration of delignification by prehydrolysis was possible at all levels of temperature in the bulk phase; however, results were more significant at the lower temperatures in the terminal phase. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1783–1791, 2015     

Tensile behavior change depending on the varying tungsten content of W–Ni–Fe alloys

Tungsten heavy alloys (WHAs) are metal–metal composites consisting of nearly pure spherical tungsten particles embedded in a Ni–Fe–W or Ni–Co–W or Ni–Cu–W ductile matrix. In this dual phase alloy, there are several complicated relations between the ductile matrix and hard tungsten particles. The aim of this research was to examine the effect of varying tungsten content on the microstructure and mechanical properties of tungsten heavy alloys. The microstructural parameters (grain size, connectivity, contiguity and solid volume fraction) were measured and were found to have a significant effect on the mechanical properties of tungsten-based heavy alloys. The result shows that the binding strength between the W and the matrix phase has a major influence on the ductility of tungsten-based alloys. The larger this binding force is, the better the ductility is.     

Preparation and characterization of P4MVPMnO4/SBA-15 as an efficient heterogeneous oxidant: An organic–inorganic hybrid polymer

This work is concerned about the preparation and characterization of MnO₄⁻ supported poly (4-methyl vinylpyridinium)/SBA-15 which was effectively employed as a heterogeneous oxidant for oxidation of aromatic alcohols. P4MVPMnO₄/SBA-15 exhibited excellent activity and selectivity under mild and solvent-less conditions.     

Formation and wear mechanism of nickel titanium intermetallics during heat treatment of nickel coating on Ti-6Al-4V substrate

In the present work, inter-diffusion of nickel and titanium and formation of Ni-Ti intermetallic compounds on Ti-6Al-4V substrate have been studied. Initially, nickel was electrodeposited on the alloy using a modified Watts bath solution at a current density of 2 A dm^?2 for 1?h. The coated specimens were then heat treated for different durations at 750, 800 and 850 °C under argon atmosphere. The effects of temperature and time on the characteristics, hardness and wear resistance of intermetallic phases were investigated. The results showed that a multilayer structure was formed after heat treatment, an outer layer of residual nickel, an area of intermetallic layers with different compositions followed by a solid solution of Ni-Ti. It was also observed that an increase in time or temperature at first led to the formation of thicker intermetallic layers; however, after passing a critical point, the intermetallic layers seem to dissolve into the substrate. Furthermore, the wear rates of the diffusion treated samples were four times lower compared to Ti-6Al-4V alloy when sliding against AISI 52100 hardened steel.     

The synergistic cooperation between MCM-41 and azithromycin: a pH responsive system for drug adsorption and release

The capability of MCM-41 silica for accepting and delivering poorly soluble azithromycin (AZT) in water is reported as robust drug delivery system. This property has been evidenced by using two MCM-41 samples with different pore sizes as hosts of AZT. The choice of this macrolide antibiotic is due not only to its low bioavailability but also to its molecular size which lies in the range of pore diameter of MCM-41s. The drug was loaded inside the pore voids of the mesoporous when MCM-41 was stirred at AZT solution, based on XRD, Nitrogen adsorption–desorption isotherms, TGA analysis data and FT-IR spectroscopy. The amount of AZT stored inside the pores of MCM-41 s was between 22 and 25 wt%. The loaded drug was released in different rates from the particles by changing the pH (1.7 and 7.4) to give a smart pH-responsive carrier system. The drug release kinetics was fitted to Korsmeyer–Peppas and Higuchi models which indicated that the rate of drug release was controlled by the diffusion of the drug. The result of the present study confirms that the controlled adsorption and liberation of AZT may improve the oral bioavailability of poor water soluble AZT. This study demonstrates the feasibility of designing reliable drug delivery systems by appropriate choice of the matrix and the organic molecule. In general, MCM-41 is a promising matrix for AZT adsorption with different application from drug delivery to wastewater filtration.