Cadmium adsorption on modified chitosan‐coated bentonite: batch experimental studies

BACKGROUND: Several researchers have investigated the use of chitosan as an adsorbent for removal of heavy metals from aqueous streams. Chitosan flake or powder swells and crumbles making it unsuitable for use in an adsorption column. Chitosan also has a tendency to agglomerate or form a gel in aqueous media. The adsorption capacity can be enhanced by spreading chitosan on physical supports that can increase the accessibility of the metal binding sites. Although several attempts have been made to enhance the adsorption capacity of chitosan, using various chemicals, the sorption capacity for metal ions decreased after cross‐linking of chitosan. RESULTS: Bentonite was coated with chitosan (Chi) and its derivative, 3,4‐dimethoxy‐benzaldehyde (Chi/DMB). The product was then used as adsorbent for the removal of Cd²⁺ from aqueous solutions. The presence of imine groups resulting from chemical modification was confirmed using IR, DRS and SEM. The adsorption followed the Langmuir isotherm and could be described by pseudo‐second order kinetics. CONCLUSION: Chi/DMB coated on bentonite increased the accessibility of metal binding sites. The Chi/DMB/bentonite showed no significant pH dependence in the pH range 2–9, but bentonite coated with chitosan revealed very intensive pH dependence, which had a considerable effect on cadmium removal. As expected adsorption of Cd²⁺ by Chi/bentonite and Chi/DMB/bentonite is dependent on contact time and adsorbent dose. In addition, an EDTA solution is suitable for desorption of cadmium ions, and the reusability of Chi/DMB/bentonite is quite good. © 2012 Society of Chemical Industry     

Effect of Different Substrate Pre-Treatments on the Resistance of Aluminum Joints to Moist Environments

The goal of this work was to evaluate and compare the performance of different surface pre-treatments applied to aluminium single lap joints exposed to warm moisture. Four different processes were considered: 1) degreasing-roughening; 2) degreasing-roughening and phosphoric acid anodising; 3) degreasing-roughening and conditioning with Picklex®20 (a water-based product for metal surface preparation); 4) degreasing-roughening and phosphoric acid anodising and contaminating the adherend surface with CaCl₂ to accelerate the tests.

After each pre-treatment, lap-shear specimens were prepared with the open face technique. The half-joints were exposed to warm moisture (50°C, 100% RH) for times up to 4 weeks, then they were completed and subjected to mechanical testing.

The results show that anodising yields the best durability, as strength remained practically constant over time; all the other groups of specimens exhibited progressive reduction in strength and wider scatter of the results. A large role is played by interfacial damage of the adherends, since, under increasing exposure time, failure tends to occur as separation at the adhesive-metal interface. The strength decreased dramatically also for the anodised specimens when the surface was contaminated, which evidences the role of the interfacial damage. The interpretation is supported also by scanning electronic microscopy observation and energy-dispersive X-ray analysis.     

Application of mesoporous magnetic carbon composite for reactive dyes removal: Process optimization using response surface methodology

Discharging the effluents of textile wastewaters into potable water resources can endanger the ecosystem, due to their reactivity, toxicity, and chemical stability. In this research, the application of powder activated carbon modified with magnetite nanoparticles (PAC-MNPs) as an adsorbent for removal of reactive dyes (Reactive black 5 (RB5) and reactive red 120 (RR120)) was studied in a batch system. The adsorption performance was evaluated as a function of temperature, contact time and different adsorbent and adsorbate concentrations. The levels of factors were statistically optimized using Box-Behnken Design (BBD) from the response surface methodology (RSM) to maximize the efficiency of the system. The adsorption process of both dyes was fit with the pseudo-second order kinetic and Langmuir isotherm models. The identified optimum conditions of adsorption were 38.7 °C, 46.3 min, 0.8 g/L and 102 mg/L for temperature, contact time, adsorbent dose, and initial dyes concentration, respectively. According to the Langmuir isotherm, the maximum sorption capacities of 175.4 and 172.4 mg/g were obtained for RB5 and RR120, respectively. Thermodynamics studies indicated that the adsorption process of the reactive dyes was spontaneous, feasible, and endothermic. After five cycles, the adsorption efficiency was around 84 and 83% for RB5 and RR120, respectively. A high value of desorption was achieved, suggesting that the PAC-MNPs have a good potential in regeneration and reusability, and also can be effectively utilized in industrial applications. PAC-MNPs also show a good anti-interference potential for removal of reactive dyes in dye-industry wastewaters.     

Preparation of novel 2-(2-oxo-2H-chromen-4-yl)-3- arylthiazolidin-4-one derivatives using an efficient ionic liquid catalyst

An eco-friendly procedure for synthesis of 2-(2-oxo-2H-chromen-4-yl)-3-arylthiazolidin-4-one derivatives by three-component reaction of 2-oxo-2H-chromene-4-carbaldehydes, aromatic amines and thioglycolic acid, with tetramethylbutane-1,4-diammonium acetate as a low-cost ionic liquid catalyst under reflux condition is described. The use of an ionic liquid as a catalyst has the advantages of high yields, short reaction time and environmentally friendly reaction media.     

Effects of dynamic vulcanization on tensile,morphological, and swelling properties of poly(vinyl chloride) (PVC)/epoxidized natural rubber (ENR)/(Kenaf core powder) composites

The effects of dynamic vulcanization on properties of poly(vinyl chloride) (PVC)/epoxidized natural rubber (ENR)/(kenaf core powder) composite were studied. Tensile properties indicated that the strength, elongation at break, and Young's modulus of the composites exhibited an increase for samples with dynamic vulcanization. Morphological analysis using scanning electron microscopy showed the interaction between ENR and PVC. There was no bonding between kenaf core powder and the PVC/ENR matrix owing to the different polarity of both components. Filler agglomerates increased, which leads to an increase of filler‐filler interaction and poor dispersion. Furthermore, swelling index indicated that the composite with dynamic vulcanization shows lower absorption of tolune compared with composites without dynamic vulcanization. J. VINYL ADDIT. TECHNOL., 22:206–212, 2016. © 2014 Society of Plastics Engineers     

Thermal Stability Investigation of Synthesized Epoxy-Polyurethane/Silica Nanocomposites

Silicon - In this research, epoxy polyurethane-nano silica nanocomposites have been synthesized using an in-situ method, for which SiO2 nanocomposites had been initially ready in N,...     

Processing and 3D printing of SiCN polymer-derived ceramics

Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.     

Surface properties of glass micropipettes and their effect on biological studies

In this paper, an investigation on surface properties of glass micropipettes and their effect on biological applications is reported. Pipettes were pulled under different pulling conditions and the effect of each pulling parameter was analyzed. SEM stereoscopic technique was used to reveal the surface roughness properties of pipette tip and pipette inner wall in 3D. More than 20 pipettes were reconstructed. Pipette heads were split open using focused ion beam (FIB) milling for access to the inner walls. It is found that surface roughness parameters are strongly related on the tip size. Bigger pipettes have higher average surface roughness and lower developed interfacial area ratio. Furthermore, the autocorrelation of roughness model of the inner surface shows that the inner surface does not have any tendency of orientation and is not affected by pulling direction. To investigate the effect of surface roughness properties on biological applications, patch-clamping tests were carried out by conventional and FIB-polished pipettes. The results of the experiments show that polished pipettes make significantly better seals. The results of this work are of important reference value for achieving pipettes with desired surface properties and can be used to explain biological phenomenon such as giga-seal formation.     

Pretreatment of wool/polyester blended fabrics to enhance titanium dioxide nanoparticle adsorption and self‐cleaning properties

This research aims to enhance the self‐cleaning properties of fibre‐blended fabric using surface pretreatment prior to the application of titanium dioxide nanoparticles. To this end, the polyester/wool fabric was modified, in that the wool fibres were oxidised with potassium permanganate and the polyester fibres were hydrolysed with lipase before nano processing. Butane tetracarboxylic acid was also used to enhance the adsorption of the nanoparticles and also to stabilise them on the fabric surface. The self‐cleaning properties of the fabric were examined through staining of the fabric with CI Basic Blue 9 and then discolouring by exposing to ultraviolet and daylight irradiation. Some other properties of the treated fabrics, such as water drop absorption, crease recovery angle and bending were investigated and are discussed in detail. The colour changes of different samples indicated an appropriate discoloration on the titanium dioxide‐treated fabrics after ultraviolet and daylight irradiation. Overall, the surface pretreatment of the wool and polyester fibres improved the self‐cleaning properties of the fabric significantly.     

Synthesis of high surface area nanocrystalline MgO by pluronic P123 triblock copolymer surfactant

Nanocrystalline magnesium oxide with high surface area was prepared by a simple precipitation method using pluronic P123 triblock copolymer (Poly(ethylene glycol)-block, Poly(propylene glycol)-block, Poly(ethylene glycol)) as surfactant. The prepared samples were characterized by X-ray Diffraction (XRD), N₂ adsorption (BET), Fourier transform infrared spectroscopy (FTIR), Thermal, differential thermal gravimetric and differential thermal analyses (TG/DTG/DTA) and Scanning electron microscopy (SEM). The obtained results revealed that the addition of surfactant is effective to prepare magnesium oxide with high surface area and affects the morphology of the prepared samples. The results showed that the magnesium oxide calcined at different temperatures ranging from 600 to 800 °C possessed a high surface area in the range of 133.9–78.1 m² g^?1. In addition, the magnesium oxide prepared with the addition of surfactant showed a narrower pore size distribution compared to the sample prepared without the addition of a surfactant.