Redistribution of impurity during recrystallization of alite in portland cement clinker

The redistribution of impurity in alite during recrystallization has been confirmed by means of the electron probe microanalysis. Each of the main impurity components shows a significant decrease in content during recrystallization. This demonstrates that the growth velocity of alite exerts influence on the amount of the impurity taken up in alite in solid solution from the interstitial melt. Whether M₃ or M₁ occurs at ambient temperature depends on the cooling rate of clinker as well as the chemical composition of alite.     

iOS application for quadrotor remote control

With the progress of electronics technology, the development of civilian UAV (unmanned aerial vehicle) applications becomes possible. In addition, smartphones have rapidly gained popularity and become very important due to the simple operability and mobility. Hence, there is a need to have an easy and flexible way to control a UAV using such technology. In this study, a remote controller using an iOS device is developed for a quadrotor to enable remote control with easy operations. Four basic programs for obtaining compass information, controlling a gimbal, autopilot function for return, and video preview function are developed and implemented for an iOS device. The basic functionalities of the programs are evaluated and confirmed through experiments using a quadrotor and an iOS device.     

New CO2 laser lines in the 11-μm wavelength region:new hot bands

Nineteen new laser lines in the 11-μm wavelength region have been observed in CW oscillation from a CO₂ laser with a high-Q, high-resolution cavity at a higher than usual current density. The frequency of each line has been measured using heterodyne frequency measurement techniques. Analysis of the frequencies shows that 15 lines are rotation-vibration transitions of the 01¹2-[11¹1,03¹1]_I band (the first sequence hot band) of the CO₂ molecule and four lines belong to the rotation-vibration transitions of the 02²1-[12 ²0, 04²0]_I band of CO₂     

High-Density Frenkel Defects as Origin of N-Type Thermoelectric Performance and Low Thermal Conductivity in Mg3Sb2-Based Materials

Mg₃Sb₂-based intermetallic compounds with exceptionally high thermoelectric performance exhibit unconventional n-type dopability and anomalously low thermal conductivity, attracting much attention to the underlying mechanisms. To date, investigations have been limited to first-principle calculations and thermodynamic analysis of defect formation, and detailed experimental analysis on crystal structure and phonon modes has not been achieved. Here, a synchrotron X-ray diffraction study clarifies that, against a previous view of a simple crystal structure with a small unit cell, Mg₃Sb₂ is inherently a heavily disordered material with Frenkel defects, charge-neutral defect complexes of cation vacancies and interstitials. Ionic charge neutrality preserved in Mg₃Sb₂ is responsible for exotic n-type dopability, which is unachievable for other Zintl phase materials. The thermal conductivity of Mg₃Sb₂ exhibits deviation from the standard T⁻¹ temperature dependency with strongly limited phonon transport due to a strain field. Inelastic X-ray scattering measurement reveals enhanced phonon scattering induced by disorder. The results will draw renewed attention to crystal defects and disorder as means to explore new high-performance thermoelectric materials.     

Frequency measurements of 9- and 10-μm N2O lasertransitions

We have measured frequencies of N₂O transitions by heterodyning sub-Doppler fluorescence-stabilized N₂O laser radiation with that from a reference CO₂ laser. A high-resolution cavity incorporates a ribbed tube and a highly reflective grating, permitting the CW oscillation of both the 10⁰ 0-02⁰0 9-μm and the 10⁰0-00⁰1 10-μm regular bands. This is the first sub-Doppler frequency measurement of the 9-μm band. The accuracy in the determination of the rotational constants for both bands has been improved by an order of magnitude, and calculated transition frequencies are presented     

Evaluation of Stress and Crystal Quality in Si During Shallow Trench Isolation by UV-Raman Spectroscopy

Defects and stress gradually accumulate throughout various Si large-scale integration fabrication processes. It is essential to monitor defects and stress carefully to suppress their unintentional introduction. In this study, we measured the stress and crystal quality in shallow trench isolation (STI) samples by ultraviolet (UV)-Raman spectroscopy with an extremely high-resolution wavenumber to evaluate the effect of post-annealing on the recovery of Si crystals. The variations of crystal quality in 200-mm wafers with STI structures gradually decreased after post-annealing for 4 h, 6 h, and 8 h; however, there was no substantial difference in the values of full-width at half-maximum of the Raman spectra. Precise measurements of variations of stress and crystal quality were successfully performed by UV-Raman spectroscopy with a high-resolution wavenumber, which enabled us to evaluate the STI process accurately.     

Statistical approach and benchmarking for modeling of multi-dimensional behavior in TRISO-coated fuel particles

The fundamental design for a gas-cooled reactor relies on the behavior of the coated particle fuel. The coating layers, termed the TRISO coating, act as a mini-pressure vessel that retains fission products. Results of US irradiation experiments show that many more fuel particles have failed than can be attributed to one-dimensional pressure vessel failures alone. Post-irradiation examinations indicate that multi-dimensional effects, such as the presence of irradiation-induced shrinkage cracks in the inner pyrolytic carbon layer, contribute to these failures. To address these effects, the methods of prior one-dimensional models are expanded to capture the stress intensification associated with multi-dimensional behavior. An approximation of the stress levels enables the treatment of statistical variations in numerous design parameters and Monte Carlo sampling over a large number of particles. The approach is shown to make reasonable predictions when used to calculate failure probabilities for irradiation experiments of the New Production - Modular High Temperature Gas Cooled Reactor Program.     

Analysis of imazalil and its major metabolite in citrus fruits by GC-FTD

A simplified simultaneous analytical method of imazalil (IZ) and its major metabolite, alpha-(2,4-dichlorophenyl)-1H-imidazole-1-ethanol (IZM), in citrus fruits was developed, and commodities samples were investigated. A homogenate of citrus fruits was extracted with ethyl acetate under basic conditions. The crude extract was partitioned between 0.025 mol/L of sulfuric acid and ethyl acetate. The analytes were extracted from the aqueous fraction under basic conditions with ethyl acetate. The extract solution was purified with an ENVI-Carb cartridge, and then analyzed by GC-FTD and GC/MS. Recoveries of IZ and IZM added to grapefruit at the level of 0.05 microgram/g were 90.0 and 108.7%, and those in the case of lemon were 100.4 and 93.0%, respectively. The detection limits were 0.01 microgram/g in samples. By this method, IZ and IZM were analyzed in 46 citrus fruits on the market and were detected simultaneously in some samples.     

Factors Influencing the Adhesion of Microorganisms to Surfaces

Starvation, growth phase, and carbon source influenced bacterial cell surface hydrophobicity. Both the number and kind of microorganisms that colonized metal surfaces depended on the type of metal and the presence of an imposed electrical potential. No significant differences in attachment and growth of a pure culture were observed when metal surfaces were dipped in an exogenous energy source. The chemical composition of naturally occurring adsorbed organic films on metal surfaces was shown to be independent of surface composition and polarization.     

Photocatalytic Activity of a TiO<Subscript>2</Subscript> Photocatalyst Doped with C<Superscript>4+</Superscript> and S<Superscript>4+</Superscript> Ions Having a Rutile Phase Under Visible Light

C⁴⁺ and S⁴⁺-codoped titanium dioxide (TiO₂) having a rutile phase was prepared. By doping C⁴⁺ and S⁴⁺ ions into a TiO₂ lattice, the absorption edge of rutile TiO₂ powder was largely shifted from 400 to 700 nm. 2-Methylpyridine and methyleneblue were photocatalytically oxidized at high efficiency on C⁴⁺ and S⁴⁺-doped TiO₂ under visible light at a wavelength longer than 5 nm.