Evaluation of apparent viscosity of liquid-containing porous particles by the intrusion method using a conical rotor

The apparent viscosity of a wet powder consisting of porous silica particles and a viscous liquid was evaluated by means of a newly developed powder rheometer in which a rotating conical rotor with grooves on the surface intrudes semi-statically into the powder bed. Using this rheometer, the relationship between the shear torque and the depth of intrusion, i.e., the torque characteristic curve, was measured under various conditions. The shear force acting on a contact point between the particles was estimated from the torque characteristic curve. Above the critical liquid amount in which the pores of the particles were filled with the liquid, the shear force increased with an increase in the thickness of the liquid film formed on the particle surface regardless of the pore volume. From the change of shear force with the physical properties of the liquid, it was clear that the shear force is closely related to the liquid bridge force acting on the contact points between the particles. The apparent viscosity coefficient of the wet powder was determined from the shear rate dependence of the shear force. At the relatively high liquid amounts corresponding to funicular and capillary states, the apparent viscosity coefficient increased sharply with the thickness of the liquid film since the viscosity of the liquid strongly affected the shear flow of the wet powder. Subtle changes of the apparent viscosity due to the liquid amount and the physical properties of the liquid can be sensitively detected by using the rotary-intrusion method.     

Radical polymerization behavior of dimethyl vinylphosphonate: Homopolymerization and copolymerization with trimethoxyvinylsilane

Dialkyl vinylphosphonates such as dimethyl vinylphosphonate (DMVP) and diethyl vinylphosphonate were quantitatively polymerized with dicumyl peroxide (DCPO) at 130°C in bulk. The polymerization of DMVP with DCPO was kinetically studied in bulk by fourier transform near‐infrared spectroscopy (FTNIR) and electron spin resonance (ESR) spectroscopy. The initial polymerization rate (R_p) was given by R_p = k[DCPO]^0.5[DMVP]^1.0 at 110°C, being the same as that of the conventional radical polymerization involving bimolecular termination. The overall activation energy of the polymerization was estimated to be 26.2 kcal/mol. The polymerization system involved ESR‐observable propagating polymer radicals under the practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) were k_p = 19 L/mol s and k_t = 5.8 × 10³ L/mol s at 110°C, respectively. The molecular weight of the resultant poly(DMVP)s was low (M_n = 3.4 ? 3.5 × 10³), because of the high chain transfer constant (C_m = 3.9 × 10^?2 at 110°C) to the monomer. DMVP (M₁) showed a considerably high reactivity in the radical copolymerization with trimethoxyvinylsilane (TMVS) (M₂) at 110°C in bulk, giving an inorganic component‐containing functional copolymer with potential flame‐retardant properties; r₁ = 1.6 and r₂ = 0. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Climate change and trace gases

Palaeoclimate data show that the Earth's climate is remarkably sensitive to global forcings. Positive feedbacks predominate. This allows the entire planet to be whipsawed between climate states. One feedback, the 'albedo flip' property of ice/water, provides a powerful trigger mechanism. A climate forcing that 'flips' the albedo of a sufficient portion of an ice sheet can spark a cataclysm. Inertia of ice sheet and ocean provides only moderate delay to ice sheet disintegration and a burst of added global warming. Recent greenhouse gas (GHG) emissions place the Earth perilously close to dramatic climate change that could run out of our control, with great dangers for humans and other creatures. Carbon dioxide (CO2) is the largest human-made climate forcing, but other trace constituents are also important. Only intense simultaneous efforts to slow CO2 emissions and reduce non-CO2 forcings can keep climate within or near the range of the past million years. The most important of the non-CO2 forcings is methane (CH4), as it causes the second largest human-made GHG climate forcing and is the principal cause of increased tropospheric ozone (O3), which is the third largest GHG forcing. Nitrous oxide (N2O) should also be a focus of climate mitigation efforts. Black carbon ('black soot') has a high global warming potential (approx. 2000, 500 and 200 for 20, 100 and 500 years, respectively) and deserves greater attention. Some forcings are especially effective at high latitudes, so concerted efforts to reduce their emissions could preserve Arctic ice, while also having major benefits for human health, agricultural productivity and the global environment.     

A review of studies of the biological effects of electromagnetic fields in the intermediate frequency range

Concerns have been raised regarding the relationship between electromagnetic fields and human health. Compared to the research on extremely low frequency (ELF) and radio frequency (RF) electromagnetic fields, very few studies have addressed the biological effects of the electromagnetic field with intermediate frequency (IF) from 300 Hz to 10 MHz. This paper reviews the biological effects of IF electromagnetic fields with around 20 kHz from in vivo and in vitro studies. In contrast to studies on the effects of ELF and RF electromagnetic fields, few studies on biological effects of IF elecromagnetic fields have been carried out. From a short review based on published articles, it is seen that the available research data is inadequate for health risk assessment of IF electromagnetic fields. In future, it will be very important to conduct biological effects studies and evaluate the effects on human health from exposure to IF electromagnetic fields. © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Adsorption of Shiga Toxin to Poly‐γ‐Glutamate Precipitated

We screened foods containing indigestible ingredients in the ability to adsorb Shiga toxin (Stx). When 5 mg of foods and dietary fibers such as dry vegetables and inulin were mixed and incubated with 0.5 mL of Stx solution (100 ng/mL) containing 0.5% bovine serum albumin, both Stx1 and Stx2 seemed to be adsorbed by only a fermented food, natto (a traditional Japanese food prepared from steamed soybeans by the biological action of Bacillus subtilis). We purified the Stx‐adsorbing substance from natto by extraction with H₂O, acid treatment, Proteinase K treatment, and an ion exchange chromatography. The purified substance showed an average molecular mass of about 600 kDa. We identified it as poly‐γ‐glutamate (PGA) by amino acid analysis of its hydrolysate and peptide analysis after its treatment with Proteinase K. Purified PGA (MW: molecular weight = about 600 kDa) was considered to adsorb both Stx1 and Stx2 when we separated adsorbed and unadsorbed Stxs (MW = about 72 kDa) by an ultrafiltration method with a centrifugal filter unit (MWCO: molecular weight cut‐off = 100 K). However, PGA with the ability to adsorb Stx was an insoluble form precipitated in the filter unit during centrifugation. PGA precipitated beyond the saturated density was also confirmed to well adsorb both Stx1 and Stx2 by an equilibrated dialysis method. To the best of our knowledge, this is the 1st report on food‐adsorbing Stx.     

An Antifungal Saponin from White Asparagus ( Asparagus officinalis L) Bottoms

An antifungal saponin was isolated from the bottom cut of white asparagus (Asparagus officinalis L), which is unusable in food processing. The structure of the saponin was identified as 3-O-[{α-L -rhamnopyranosyl (1→2)} {α-L -rhamnopyranosyl (1→4)}-β-D -glucopyranosyl] (25S) spirost-5-ene-3β-ol from chemical and spectral data. This saponin was shown to be identical with collettinside III from Dioscorea collettii, and to inhibit the growth of some kinds of fungi at μg ml⁻¹ levels.     

Effect of sparteine on the photopolymerization of methyl and ethyl methacrylates with bis(cyclopentadienyl)titanium dichloride in a water–methanol mixture

The photopolymerization of methyl methacrylate (MMA) with bis(cyclopentadienyl)titanium dichloride (Cp₂TiCl₂) in a H₂O‐MeOH [1 : 1 (v/v)] mixture was examined at 40°C in the presence of 2,2′‐bipyridyl (Bipy), 1,10‐phenanthlorine (Phen) or sparteine (Spr) as the chelating reagent. The presence of these chelating reagents retarded the photopolymerization. Poly(MMA)s formed in the presence of them were found to contain a considerable fraction of the benzene‐insoluble part, in contrast to the ones in the absence of them. Spr was the most effective for formation of the insoluble part. The benzene‐insoluble poly(MMA) was insoluble in usual organic solvents including acetone, tetrahydrofuran, ethyl acetate, and dimethyl sulfoxide, suggesting crosslinking. However, poly(MMA) reproduced by hydrolysis of the insoluble part followed by methylation was soluble in usual organic solvents, indicating no crosslinking between polymer main chains. The insoluble part was thermally more stable than the soluble part. Polymerization of ethyl methacrylate in the presence of Spr gave similar results. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 815–822, 2001     

Rare Hereditary Gynecological Cancer Syndromes

Hereditary cancer syndromes, which are characterized by onset at an early age and an increased risk of developing certain tumors, are caused by germline pathogenic variants in tumor suppressor genes and are mostly inherited in an autosomal dominant manner. Therefore, hereditary cancer syndromes have been used as powerful models to identify and characterize susceptibility genes associated with cancer. Furthermore, clarification of the association between genotypes and phenotypes in one disease has provided insights into the etiology of other seemingly different diseases. Molecular genetic discoveries from the study of hereditary cancer syndrome have not only changed the methods of diagnosis and management, but have also shed light on the molecular regulatory pathways that are important in the development and treatment of sporadic tumors. The main cancer susceptibility syndromes that involve gynecologic cancers include hereditary breast and ovarian cancer syndrome as well as Lynch syndrome. However, in addition to these two hereditary cancer syndromes, there are several other hereditary syndromes associated with gynecologic cancers. In the present review, we provide an overview of the clinical features, and discuss the molecular genetics, of four rare hereditary gynecological cancer syndromes; Cowden syndrome, Peutz-Jeghers syndrome, DICER1 syndrome and rhabdoid tumor predisposition syndrome 2.     

Effect of LiClO4 on radical polymerization of methyl methacrylate

The effect of LiClO₄ on the polymerization of methyl methacrylate (MMA) with dimethyl 2,2′-azobisisobutyrate (MAIB) was investigated at 50°C in methyl ethyl ketone. The polymerization proceeded homogeneously even at [LiClO₄] as high as 3.00 mol/L. The polymerization rate (R_p) and the molecular weight of the resulting polymer profoundly increased with increasing [LiClO₄]. R_p at 3.00 mol/L [LiClO₄] was 12 times that in the absence of LiClO₄. The rate equation depended on the presence or absence of LiClO₄: R_p = k′[MAIB]^0.5 [MMA]^1.5 in the presence of 3.00 mol/L [LiClO₄] and R_p = k[MAIB]^0.5 [MMA]^1.0 in the absence of LiClO₄. The overall activation energies of polymerization were 38.5 kJ/mol in the presence of 3.00 mol/L [LiClO₄] and 77.4 kJ/mol in the absence of LiClO₄, respectively. The tacticities of resulting poly(MMA) were insensitive to the presence of LiClO₄. In the copolymerization of MMA and styrene, Q and e values of MMA increased with increasing [LiClO₄], leading to enhanced alternating copolymerizability. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 1361–1368, 1997     

Formation of poly(methyl methacrylate) with novel solubility characters in the photopolymerization with bis(cyclopentadienyl)titanium dichloride in a water–methanol mixture

Methyl methacrylate (MMA) was observed to be easily polymerized in the photopolymerization with bis(cyclopentadienyl)titanium dichloride (Cp₂TiCl₂) in a water–methanol mixture under irradiation of a 15-W fluorescent room lamp. The polymerization proceeded heterogeneously. The rate (R_p) of heterogeneous photopolymerization in a 1 : 1 (v/v) water–methanol mixture at 40°C was apparently given by R_p=k[Cp₂TiCl₂]^0.2 [MMA]^2.4. The resulting poly(MMA) was found to contain a tetrahydrofuran (THF)-insoluble part. The separated THF-insoluble part differed significantly from the usual radical poly(MMA) in solubility characters. It is of great interest that the THF-insoluble poly(MMA) was soluble in benzene and toluene, but insoluble in polar solvents, such as ethyl acetate, acetone, methyl ethyl ketone, dimethylformamide, and dimethylsulfoxide. The copolymerization results of MMA and acrylonitrile revealed that the present photopolymerization initiated with Cp₂TiCl₂ proceeds via a radical mechanism. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 525–531, 1998