Fluorescence in situ hybridization analysis of chromosome 1p36 deletions in human MYCN amplified neuroblastoma

Artificial illumination is an important factor in the management of layers. In this study, a new monochromatic light system was developed for egg layers. Prelaying pullets (Lohmann) were marked and housed in nine light and temperature control rooms (15 battery cages, 3 hens per cage; n = 45), divided into three light treatments: 0.1 and 0.01 W/m2 light intensity using light emitting diode (LED) lamps and 0.1 W/m2 using mini-fluorescent bulbs (PL) (control). In each of the LED rooms, three wavelengths were tested: 560 (n = 9), 660 (n = 9), 880 (n = 6), and 660 intermitted lighting (15 min light 45 min dark, 660IN) (n = 9). Birds were exposed to 12 h light and 12 h of darkness using PL lamps. At 21 wk of age, the light period was increased to 12.75 h by using 5.5 h of LED lamps and 7.25 of PL light source for Groups 1 and 2, the third group received 12.75 h of PL light. Until 28 wk of age, light hours increased by 0.5 h/w using LED light for Groups 1 and 2 and PL source for the third group, reaching 16 h of light at 28 wk of age. Egg production and feed consumption were recorded daily; egg components were recorded weekly for 10 mo. A significant reduction in egg production was observed in all 880nm groups; no differences in egg production and quality were found in the other groups. Feed consumption was significantly lower by 7% in all 0.01 W/m2 groups. We suggest that an important reduction in rearing costs of laying hens may be obtained by using this system.     

Spontaneous emission model of surface-emitting DFB semiconductorlasers

A general spontaneous emission model is developed for surface-emitting (SE) distributed feedback (DFB) semiconductor lasers. The frequency distribution of spontaneous emission noise below lasing threshold and the spontaneous emission rate in lasing operation are formulated by using a transfer matrix method combined with the Green's function method. The effective linewidth enhancement factor is obtained from this model in terms of the elements of the transfer matrix. By way of example, the author applies the formulation to a standard SE DFB laser, and a SE λ/4-shifted DFB laser with a distributed Bragg reflector (DBR) mirror. In particular, the author analyzes the below-threshold spectrum, the threshold current density, the differential quantum efficiency, and the spectral linewidth of these lasers     

Augmenting Edge-Connectivity between Vertex Subsets

Given a directed or undirected graph G=(V,E), a collection ${\mathcal{R}}=\{(S_{i},T_{i}) \mid i=1,2,\ldots,|{\mathcal{R}}|, S_{i},T_{i} \subseteq V, S_{i} \cap T_{i} =\emptyset\}$ of two disjoint subsets of V, and a requirement function $r: {\mathcal{R}} \to\mathbb{R}_{+}$ , we consider the problem (called area-to-area edge-connectivity augmentation problem) of augmenting G by a smallest number of new edges so that the resulting graph $\hat{G}$ satisfies $d_{\hat{G}}(X)\geq r(S,T)$ for all X?V, $(S,T) \in{\mathcal{R}}$ with S?X?V?T, where d _G (X) denotes the degree of a vertex set X in G. This problem can be regarded as a natural generalization of the global, local, and node-to-area edge-connectivity augmentation problems. In this paper, we show that there exists a constant c such that the problem is inapproximable within a ratio of $c\log{|{\mathcal{R}}|}$ , unless P=NP, even restricted to the directed global node-to-area edge-connectivity augmentation or undirected local node-to-area edge-connectivity augmentation. We also provide an ${\mathrm{O}}(\log{|{\mathcal{R}}|})$ -approximation algorithm for the area-to-area edge-connectivity augmentation problem, which is a natural extension of Kortsarz and Nutov’s algorithm (Kortsarz and Nutov, J. Comput. Syst. Sci., 74:662–670, 2008). This together with the negative result implies that the problem is ${\varTheta}(\log{|{\mathcal{R}}|})$ -approximable, unless P=NP, which solves open problems for node-to-area edge-connectivity augmentation in Ishii et al. (Algorithmica, 56:413–436, 2010), Ishii and Hagiwara (Discrete Appl. Math., 154:2307–2329, 2006), Miwa and Ito (J. Oper. Res. Soc. Jpn., 47:224–243, 2004). Furthermore, we characterize the node-to-area and area-to-area edge-connectivity augmentation problems as the augmentation problems with modulotone and k-modulotone functions.     

Efficient material design for diesel particulate filters

This paper will give an overview about the filter development for diesel particulate emission control in automotive applications. The material development for passenger car diesel particulate filters led to new materials like silicon carbide while for heavy duty applications still Cordierite plays a major role. But in the future other materials might also be used for passenger cars. This paper will show the basic difference between both applications and describe the material design in terms of filter properties (base material, back pressure aspects, filtration efficiency, coating impact). Current application on vehicles with catalysed soot filters (CSF) with and without oxidation catalyst will be presented. Furthermore an outlook will be given on materials for catalysed soot filters for the future.     

In-situ monitoring of the stabilization with hydrogen of free radicals thermally induced from coal using high pressure e.s.r., d.t.a. and p.d.a. equipment

High temperature, high pressure e.s.r. measurements of the hydrogenation reaction of Taiheiyo coal in the presence of catalysts were carried out to understand the stabilization of thermally and/or catalytically induced free radicals. A decrease in free radical concentration with increasing temperature was observed for ZnCl₂ and SnCl₂ · 2H₂O catalysts at 10MPa under hydrogen gas. High pressure modified single-cell d.t.a. and p.d.a. equipment augmented the uniquely designed high temperature, high pressure e.s.r. cell. The hydrogenation reaction was monitored under the same experimental conditions as for e.s.r. From the results of the combination of high temperature, high pressure e.s.r. with high pressure d.t.a. and p.d.a., it was established that H₂ molecules can react efficiently with free radicals from coal molecules created by the presence of ZnCl₂ and SnCl₂ · 2H₂O catalysts.     

High-strength–high-modulus polyimide fibers II. Spinning and properties of fibers

The polyimides based on 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA) described in Part I of this series were dissolved in p-chlorophenol and spun into fibers using a coagulating bath of ethanol. The fibers as spun had in general low tenacities and low moduli, but a heat treatment at 300–500°C under tension produced a remarkable increase in strength and modulus, and fibers with a tensile strength of 26 g/den (3.1 GPa) and an initial modulus higher than 1,000 g/den (120 GPa) could be obtained. Thus, the annealed fibers of polyimides are comparable to aramid fibers in mechanical properties. To heating in air and in the saturated steam, the polyimide fibers showed higher resistance than the aramid fibers. The polyimide fibers surpassed the aramid fibers in resistance to acid treatment and ultraviolet (UV) irradiation, but were inferior in resistance to alkali treatment. The annealed fibers of polyimides displayed distinct X-ray diffraction patterns. The chain repeat distance of 20.5 Å determined on the fibers of polyimide prepared from BPDA and o-tolidine, and 20.6 Å determined on the fibers of polyimide derived from BPDA and 3,4′-diaminodiphenyl ether are reasonable when the dimensions of monomeric units and the shapes of the molecular chains are considered. The X-ray reflections of both polyimide fibers were indexed satisfactorily on the basis of postulated unit cells.     

Preparation of soluble TiCl3 catalysts by reduction of TiCl4 with Grignard reagents and their use for copolymerization of ethylene with propylene

Summary Preparations of soluble TiCl₃ catalysts by reduction of TiCl₄ with some types of Grignard reagents were carried out in halogenated hydrocarbon solvents by using appropriate ethers as donor. The soluble TiCl₃·MgX₂·ether complex catalysts and triisobutylaluminum as co-catalyst showed high activities for the copolymerization of ethylene with propylene. It was first found that the soluble TiCl₃·MgX₂·ether complex catalysts enhance the activities for the copolymerizations in the same manner as solid titanium catalysts supported on MgCl₂ which show high activities for homopolymerizations of olefin monomers. The copolymers obtained possessed low crystallinities. Also, the copolymers seem to contain microblock sequences and have outstandingly high tensile strength and elongation at break compared to copolymers by the conventional VOCl₃/Al(Et)_1.5Cl_1.5 catalyst system.     

Optimization of the sputter-deposited platinum cathode for a direct methanol fuel cell

The electrodes prepared by a sputtering method were evaluated as the cathodes for direct methanol fuel cells (DMFCs). Pt loading below 0.25 mg cm⁻² achieved higher mass activities than that of 0.5 mg cm⁻² prepared by the paste method, which was general conventional method. However, an increase in Pt loading reduced the catalyst activity for the oxygen reduction reaction (ORR). This result may suggest an increase in only electrochemically inactive Pt. Pt utilization efficiency can be found about ten times higher at Pt loading of 0.04 mg cm⁻². Moreover, addition of Nafion to sputter-deposited Pt cathodes is found possible to improve the catalyst activity for the ORR, but the excess Nafion over the optimum condition reduces the active sites.