A 45 nm 2-port 8T-SRAM Using Hierarchical Replica Bitline Technique With Immunity From Simultaneous R/W Access Issues

We propose a new 2-port SRAM with a single read bit line (SRBL) eight transistors (8 T) memory cell for a 45 nm system-on-a-chip (SoC). Access time tends to be slower as a fabrication is scaled down because of threshold voltage (V_t) random variations. A divided read bit line scheme with shared local amplifier (DBSA) realizes fast access time without increasing area penalty. We also show an additional important issue of a simultaneous read and write (R/W) access at the same row by using DBSA with the SRBL-8T cell. A rise of the storage node causes misreading. A read end detecting replica circuit (RER) and a local read bit line dummy capacitance (LDC) are introduced to solve this issue. A 128 bit lines - 512 word lines 64 kb 2-port SRAM macro using these schemes was fabricated by a 45 nm bulk CMOS low-standby-power (LSTP) CMOS process technology [1]. The memory cell size is 0.597 mum². This 2-port SRAM macro achieves 7 times faster access time without misreading.     

Structural Defects Control the Energy Level Alignment at Organic/Organic Interfaces

The dependence of the energy level alignment (ELA) on structural defects at an organic/organic heterojunction (OOH) of perfluoropentacene (PFP)‐on‐diindenoperylene (DIP) was investigated using X‐ray scattering and ultraviolet photoelectron spectroscopy. The density of structural defects near the interface between the PFP and DIP layers was varied by changing the growth temperature of the DIP film. A direct relationship was found between the defect density and the ELA at the OOH; the ELA together with the change in the electrostatic potential (quasi‐interface dipole layer) at the OOH varies systematically with the defect density near the interface. This indicates that a key factor affecting the ELA is the electrostatic potential change across the OOH interface, which is produced by electron transfer from DIP occupied gap states to PFP unoccupied gap states. These gap states originate from the defects and are effectively controlled by adjusting the growth conditions of the organic films. As a result, the ELA at OOH interfaces can be controlled by the density of structural defect, which is important for organic devices employing OOHs, such as organic photovoltaic cells.     

Structural, electrical and bending properties of transparent conductive Ga-doped ZnO films on polymer substrates

We investigated the characteristics of highly transparent conductive Ga-doped ZnO (GZO) polycrystalline films of 100 nm thickness deposited on glass and polymer substrates. GZO films were deposited by ion plating with dc-arc discharge. We developed multiple-deposition method to obtain various deposition process temperatures lower than 100 °C. Cross-sectional SEM images show that all the GZO films have columnar structure. Analysis of data obtained by XRD measurements shows that all the GZO films with wurtzite structure exhibit highly (002) orientation perpendicular to the substrate. The resistivity of the GZO films deposited on polyester and glass substrates were 5.0 × 10^-4 Ω · cm. The mechanical bending properties of the GZO films were investigated by comparing the sheet resistance determined before and after a bending test with various bending diameters. For the bending diameter of more than 30 mm, all the GZO films exhibited excellent bending properties with no change in sheet resistance. For the bending diameter of less than 20 mm, we found the sheet resistance affected by the bending. We demonstrated that our multiple-deposition method to achieve different controllable polyester substrate temperatures is highly suitable for improving the bending properties of GZO films.     

Directional characteristics of radiation reflection on rough metal surfaces with description of heat transfer parameters

In this paper we clarify directional characteristics of thermal radiation reflection on rough metal surfaces and establish a technique for determining the parameters for heat transfer computation of radiation energy exchange among surfaces. Directional distribution of bidirectional reflectance ρ of surfaces of root‐mean‐square roughness Σ = 0.1 to 1 µm to the irradiation of a visible laser of wavelength λ = 0.6328 µm and to that of an infrared laser of λ = 3.39 µm is investigated experimentally. The optical roughness (Σ/λ) ranges from 0.028 to 1.27. A measure of the magnitude of specular reflection is presented. A model for describing the ρ distribution is presented, and the experimental results of the ρ distribution are analyzed quantitatively and systematically to determine the values of the specular reflection component R_s and the perfect‐diffuse reflection component R_d of the hemispherical reflectance R_H, which are input parameters for radiation heat transfer computation. © 2002 Scripta Technica, Heat Trans Asian Res, 31(2): 76–88, 2002; DOI 10.1002/htj.10008     

TAK-603 selectively suppresses Th1-type cytokine production and inhibits the progression of adjuvant arthritis

Lipopeptides carrying a farnesyl thioether or a palmitic acid thioester and a farnesyl thioether were prepared from S-farnesyl cysteine methyl ester by N-terminal extension of the peptide chain employing the base labile Fmoc blocking group of the palladium(0) sensitive Aloc urethane. By means of this technique a lipohexapeptide representing the completely functionalized, i.e. palmitoylated and farnesylated C-terminus of the human N-Ras protein, was prepared. If acid labile blocking functions like the Boc group were used, upon deprotection an undesired addition of the acid to the double bonds of the farnesyl residue occurred. Therefore, acid labile blocking groups should not be employed in the synthesis of farnesylated lipopeptides. The lipopeptide methyl esters which carry only a farnesyl group do not inhibit protein farnesyl transferase, whereas palmitoylated peptides are weak inhibitors of this enzyme.     

Apoptosis and cellular proliferation in human epidermal squamous cell neoplasia

The structural changes in outpatient medical care in eastern Germany took place by far-reaching winding up of the outpatient departments. At the same time, many doctors from these institutions set up a practice. These changes also concerned the medical care by family doctors. It is assumed that as a result of these partly extensive changes there are also changes in the accessibility of the family doctor by outpatients. We will describe in this paper the level attained in Dresden, capital of Saxony in 1995 and 1996, from the point of view of the inhabitants. Existing problems are shown. In this connection, random samples of inhabitants of Dresden were interviewed by postal survey with questions on this subject in 1995 and 1996.