Fabrication of fluorine-terminated diamond-like carbon thin film using a hyperthermal atomic fluorine beam

Surface modification of diamond-like carbon (DLC) film was performed using a hyperthermal atomic fluorine beam on the purpose of production of hydrophobic surface by maintaining the high hardness of DLC film. By the irradiation of atomic fluorine beam of a 1.0 × 10²⁰ atoms/cm², the contact angle of a water drop against the DLC surface increased from 73° to 111°. The formation of CF₃, CF₂ and CF bonding on the modified DLC surface was confirmed from the measurements of X-ray photoelectron spectra and near-edge X-ray absorption fine structure spectra. Irradiation of hyperthermal atomic fluorine beam was concluded to produce insulator fluorine-terminated DLC film, which has high F content on the surface, by the taking of the use of neutral atomic beam as a fluorine source.     

Preparation and mesostructure control of highly ordered zirconia particles having crystalline walls

Mesostructured zirconia particles having monoclinic-type crystalline walls were prepared using a low-temperature crystallization technique. Crystalline zirconia particles with highly-ordered mesostructures were obtained through the sol–gel process of zirconium sulfate tetrahydrate at 333 K in the presence of molecular self-assemblies of cetyltrimethylammonium bromide (CTAB) or mixtures of CTAB and anionic molecules such as sodium dodecyl sulfate and sodium p-toluenesulfonate. Variations in the molar ratios of CTAB and the chemical species of anionic molecules led to the variations in the periods of highly-ordered zirconia having crystalline walls. Calcination of the mesostructured zirconia particles prepared using templates consisting solely of CTAB yielded crystalline mesoporous zirconia particles.     

Incorporation of Alpha‐Linolenic Acid and Enhancement of n‐3 Fatty Acids in Nile Tilapia: a Factorial Design

A 2² factorial design (two factors at two levels, in triplicate) was performed to investigate the influence of factors A (time of treatment, 15 and 30 days) and B (chia oil content in a supplemented diet, at 2.1 and 4.2 %) in three responses of interest referring to: (a) the incorporation of alpha‐linolenic acid (LNA) in lipids of Nile tilapia fillet; (b) the enhancement of n‐3 fatty acids; and (c) the decrease in the omega‐6/omega3 (n‐6/n‐3) ratio in fish. Factors A and B were significant in the three regression models obtained and the interaction AB was a significant contributor to the LNA and n‐6/n‐3 ratio. Analysis of variance suggested three significant and predictive mathematical models. Response surfaces analyses from designs indicated higher LNA and n‐3 contents and a lower n‐6/n‐3 ratio using both factors A and B in the higher levels (30 days of treatment and 4.2 % of chia oil in the diet for fish) chosen for this study.     

Synthesis and gas sensing properties of SnO<Subscript>2</Subscript> nanoparticles with different morphologies

The SnO₂ particles with different morphologies of nanorod, nanosheet, nanoparticle and nanodot were synthesized by liquid-phase methods. In addition, Pt was loaded on each prepared SnO₂ by dispersing SnO₂ particles into PtCl₄ ^2? aqueous solutions containing 0.67 vol% methanol, followed by UV light irradiation for 6 h. The products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Brunauer–Emmett–Teller measurement. The gas sensing properties of the synthesized SnO₂ were tested by detecting the change in electric resistivity in flowing aceton and methanol gases with nitrogen base. The gas sensing properties greatly changed depending on not only the specific surface area, but also the exposed crystal plane, i.e., the SnO₂ nanorods exposing (111) planes showed the excellent sensitivity and quick response ability, indicating the excellent gas sensing ability of the (111) plane. Furthermore, the Pt loading exceedingly enhanced the gas sensing properties.     

Development of gap sensing system for narrow gap laser welding

Narrow gap welding with an oscillation laser beam is one of the effective processes for thick plate welding. To put this welding process into practical manufacturing, a groove-sensing system using image processing for narrow gap welding with an oscillation laser beam is used. This developed system uses still images of the weld zone taken by a coaxial CMOS camera. It can recognize the position of the groove wall by analysing the brightness distribution in the still image. It can then control the oscillation width and the laser-irradiated area by calculating the groove width and the groove centre position. Some narrow gap welding experiments were performed to evaluate the performance of the developed system. The results revealed that the developed system is effective for narrow gap welding with an oscillation laser beam. Using this system, the narrow gap groove can be welded even if the groove width has changed during the welding process.     

Mechanical role of reinforcement in seismic behavior of steel-strip reinforced earth wall

In the current design practices of steel-strip reinforced earth walls (SSREWs), the length of the reinforcing material is determined based on the equilibrium between the reinforcement tension and the earth pressure acting on the wall. Here, the resistance of the reinforcing material laid in the active failure zone (AFZ) is not considered. Moreover, the mechanical role of the reinforcing material against the integrity of the SSREW has not been sufficiently verified. Regarding the seismic stability of SSREW, although it is investigated by treating the entire reinforced earth wall as a rigid body, this inspection method is for gravity-retaining walls, and the difference in the seismic behavior between the SSREW and the rigid body is not clear. In this study, therefore, dynamic centrifuge model tests on 6 types of SSREWs were conducted to clarify the following items: (1) the basic earthquake behavior of a SSREW, (2) the mechanical role of the reinforcing material laid in the AFZ and (3) the mechanical role of the reinforcing material against the integrity of the SSREW. The results indicated that the reinforcing material laid in the AFZ can restrain the amount of deformation of the wall during earthquakes. Furthermore, the more stable the AFZ is, the smaller the maximum wall displacement will be.     

Improvement in impact strength of modified cardanol‐bonded cellulose thermoplastic resin by using olefin resins

Impact strength of a modified cardanol‐bonded cellulose thermoplastic resin was greatly improved by using a small amount of olefin resins. As we showed, this thermoplastic resin (3‐pentadecylphenoxy acetic acid (PAA)‐bonded cellulose diacetate (CDA): PAA‐bonded CDA) exhibited high practical properties such as bending strength, heat resistance, and water resistance. However, its impact strength was insufficient for use in durable products. We improved the impact strength of PAA‐bonded CDA by adding hydrophobic olefin resins, such as polyethylene or polypropylene, while maintaining good bending strength and breaking strain. Furthermore, the application of olefin resins also increased water resistance and fluidity. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39829.     

Improvement in impact strength of modified cardanol‐bonded cellulose thermoplastic resin by adding modified silicones

The impact strength of cellulose diacetate (CDA) bonded with a modified cardanol (3‐pentadecylphenoxy acetic acid: PAA) was greatly improved up to 9 kJ/m² by adding a relatively small amount of modified silicones while suppressing a decrease in bending strength. In our recent research, this thermoplastic resin (PAA‐bonded CDA) exhibited high rigidity, glass transition temperature, and water resistance. However, its impact strength was insufficient for use in durable products. Therefore, silicones modified with polyether, amino, and epoxy groups were investigated as possible ways to improve the impact strength. The results show that adding polyether‐modified silicone (polyether silicone) with moderate polarity relative to PAA‐bonded CDA resulted in shearing deformation greatly enhances its impact strength while maintaining other properties, including glass transition temperature (T_g), water resistance, and thermoplasticity. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40366.