Analytic Flow Design Method for an Automated Distribution Center with Multiple Shipping Areas

An analytic flow design algorithm for an automated distribution center with multiple shipping areas is presented. The main elements of the analytic flow design are the number of devices and the volumes of product flow between the devices. In the design of an automated distribution center, it is necessary to satisfy the demand throughput while minimizing construction costs. In the conventional design process, system engineers utilize experimental and intuitional approaches. However, conventional approaches are time-consuming and the design outcome is dependent on the skill of the designer. Therefore, a theoretical design algorithm is needed. We propose an analytic flow design algorithm using a dynamic network flow model and considering time-variable flow volumes according to shipment and storage schedules. To verify the feasibility of the proposed method, we perform analytic flow design using real data and confirm that the proposed method can yield a feasible analytic flow design in several minutes.     

Analysis of the current distortion factor of a three‐phase,three‐wire system

In a balanced three‐phase system, the three‐phase current distortion factor of three‐phase ac power sources has been expressed by applying the conventional single‐phase current distortion factor, which is defined for a single‐phase system. However, in an unbalanced three‐phase system, it is difficult to express the three‐phase current distortion factor for distorted three‐phase ac currents by means of the conventional single‐phase current distortion factor. For instance, the conventional current distortion factors for three‐phase ac currents are usually different from each other in the unbalanced three‐phase system. To solve the above problem, this paper proposes a novel definition of the three‐phase current distortion factor. The proposed three‐phase current distortion factor is quite effective for the unbalanced three‐phase system as well as the balanced three‐phase system. © 2000 Scripta Technica, Electr Eng Jpn, 131(4): 1–10, 2000     

Studies on absorbed water in cellulose by broad-line NMR

Nuclear magnetic resonance absorption spectra of linter cellulose containing various amounts of water were studied to clarify the relation between the amount of absorbed water in cellulose fiber and the molecular motion in such a cellulose–water system. An amorphous cellulose sample was used for the sake of comparison. The changes in line width and second moment of the spectra were measured at various temperatures. From the variation with temperature of the first-derivative curves and the second moments, it has been inferred that the proton movement of absorbed water changes markedly over the approximate range 180°–200°K and that the absorbed water lowers the glass transition temperature of cellulose to room temperature.     

Scintillation properties of Tm-doped Lu3Al5O12 single crystals

Using the micro-pulling-down (μ-PD) method, Tm-doped Lu₃Al₅O₁₂ (Tm:LuAG) single crystals were grown to examine their scintillation properties. In transmittance spectra, they exhibited about 80% transparency in the wavelengths longer than 320 nm and five absorption lines due to Tm³⁺ 4f–4f transitions were observed. ²⁴¹Am α-ray excited radioluminescence spectra were measured and intense 4f–4f emission peaks were observed with the host emission. When excited by ¹³⁷Cs γ-Ray to obtain pulse height spectra, Tm 1% doped LuAG showed the highest light yield coupled with a photomultiplier (PMT) or a silicon avalanche photodiode (Si-APD). The light yield was estimated to be 5800 and 7300 photons/MeV for PMT and Si-APD, respectively. Decay time profiles consist of two exponential components and the fast and slow components are considered to be attributed to the host and the combination of the host and Tm³⁺ 4f–4f emission, respectively.     

Modification of physicochemical properties of actin filaments suppresses cell fragmentation in the execution phase of staurosporine-induced apoptotic processes

Effects of jasplakinolide (JSP), a stabilizer of F-actin, and latrunculin A (LTA), a destabilizer of F-actin, on a series of events occurring in the execution phase of staurosporine (STS)-induced apoptotic processes were studied using human osteosarcoma 143B cells. Time-dependent apparent increases of the population of cells with collapsed membrane potential of mitochondria (Delta Psi(m)) caused by STS treatment were not due to actual decreases in the Delta Psi(m) per cell, but due to the fragmentation of cells resulting in decreases in the number of active mitochondria per cell. Decreases in the Delta Psi(m) in fragmented cells occurred late in the execution phase. Both JSP and LAT failed to prevent STS-induced release of cytochrome c from mitochondria followed by the activation of caspases 3 and 9, the cleavage of poly (ADP-ribose) polymerase (PARP) and apoptotic nuclear fragmentation. However, both drugs prevented STS-induced apoptotic cell fragmentation and decreases in the Delta Psi(m). These results indicate that physicochemical states of actin filaments play a certain role in the execution phase of STS-induced apoptotic processes.     

Identification of SYS1 as a Host Factor Required for Shiga Toxin-Mediated Cytotoxicity in Vero Cells

Shiga toxin (STx) or Vero toxin is a virulence factor produced by enterohemorrhagic Escherichia coli. The toxin binds to the glycosphingolipid globotriaosylceramide (Gb3) for its entry, and causes cell death by inhibiting ribosome function. Previously, we performed a loss-of-function screen in HeLa cells using a human CRISPR knockout (KO) library and identified various host genes required for STx-induced cell death. To determine whether this library targeted to the human genome is applicable to non-human primate cells and to identify previously unrecognized factors crucial for STx-induced cell death, we herein performed a similar screen in the African green monkey kidney-derived Vero C1008 subline. Many genes relevant to metabolic enzymes and membrane trafficking were enriched, although the number of enriched genes was less than that obtained in the screening for HeLa cells. Of note, several genes that had not been enriched in the previous screening were enriched: one of these genes was SYS1, which encodes a multi-spanning membrane protein in the Golgi apparatus. In SYS1 KO Vero cells, expression of Gb3 and sphingomyelin was decreased, while that of glucosylceramide and lactosylceramide was increased. In addition, loss of SYS1 inhibited the biosynthesis of protein glycans, deformed the Golgi apparatus, and perturbed the localization of trans-Golgi network protein (TGN) 46. These results indicate that the human CRISPR KO library is applicable to Vero cell lines, and SYS1 has a widespread effect on glycan biosynthesis via regulation of intra-Golgi and endosome–TGN retrograde transports.     

Novel poly-gamma-glutamate-processing enzyme catalyzing gamma-glutamyl DD-amidohydrolysis

The pgdS gene product of Bacillus subtilis, PgdS, cleaves poly-gamma-glutamate (PGA) in an endo-peptidase-like fashion. However, its catalytic property remains obscure. In this study, a simple assay for the PgdS enzyme using 1-fluoro-2,4-dinitrobenzene was developed, and some characteristics of PgdS, such as optimal pH, were examined. The enzyme was strongly inhibited by a thiol-modifying reagent, suggesting that it possesses essential cysteine residue(s) in catalysis. PgdS exhibited a high affinity to PGA that consisted mainly of D-glutamate residues, but no affinity to PGA composed only of L-glutamate residues (L-PGA). The enzyme processed DL-copolymer-type PGA (DL-PGA) with an average molecular mass of 1,000 kDa to a high-molecular-mass L-glutamate-rich fragment (average 200 kDa), the L-rich PGA fragment, and low-molecular-mass fragment composed mostly of D-glutamate residues (average 5 kDa), D-fragment. To deepen our understanding of the catalytic property of the PgdS enzyme, we analyzed the structures of the N- and C-terminal regions and found that D-glutamyl residues successively lie even at both ends of the L-rich PGA fragment. Our observations indicate that PgdS is a novel endo-peptidase that specifically cleaves the gamma-amide linkage between two D-glutamate residues in PGA, i.e., gamma-glutamyl DD-amidohydrolase. The enzyme is possibly useful in the biochemical processing of B. subtilis DL-PGA.     

Role of granulosa and theca cell interactions in ovarian follicular maturation

We developed a culture system in which two types of ovarian follicular cells were allowed to attach to opposite sides of a collagen membrane. Using this in vitro cell culture system, we studied the effects of granulosa- and theca-cell interaction on the morphology, structure, and function of bovine ovarian follicular cells. In the first part of the study, we explored how the interaction between theca and granulosa cells affects the morphology and structure of the cells. This study was done using follicular cells collected from bovine ovarian follicles at the early developmental stage. Granulosa cells cultured alone were flattened, and formed a monolayer sheet. By contrast, granulosa cells cultured with theca cells were convex, and formed multilayer sheets. Theca cells cultured alone were thin, flat, and spindle-shaped. Theca cells cultured with granulosa cells were also spindle-shaped; however, they appeared convex and more densely packed when compared with theca cells cultured alone. In the second part of the study, the possible role of the cellular interaction in the control of differentiation and growth of granulosa and theca cells was investigated. When follicular cells were isolated from the early stage of follicular development, theca cells reduced progesterone and inhibin production by granulosa cells and augmented the growth of granulosa cells. When the cells were isolated from the late stage of follicular development, by contrast, theca cells augmented hormonal production by granulosa cells, and did not affect the growth of granulosa cells. The growth and androstenedione production by theca cells were increased by the presence of granulosa cells, irrespective of the origin of follicular cells. These results demonstrated that communication between two types of follicular cells results in reciprocal modulation of their morphology, structure, growth, and function. Cellular interactions seem to be one of the major factors controlling the differentiation and growth of the follicular cells during the follicular maturation process. In contrast to granulosa and theca cells cultured alone, cells in the coculture seemed to possess morphological and functional characteristics more similar to those of cells in the growing follicular wall in vivo. Thus, we speculate that the interaction between these two types of follicular cells is essential for the maintenance of original structure and function of the bovine follicular wall.     

Living cationic polymerization of vinyl monomers by organoaluminium halides

Summary Living cationic polymerization of isobutyl vinyl ether was achieved by EtAlCl₂ in the presence of ethyl acetate at rather high temperatures up to +25°C in toluene. In the absence of the ester additives, neither living nor long-lived propagating species were formed under these conditions. Similarly, living propagating species of vinyl ethers with an ester unit in the pendant (2-vinyloxyethyl benzoate and methacrylate) were obtained with EtAlCl₂ alone. The obtained polymers showed a very narrow molecular weight distribution (¯M_w/¯M_n<1.2) and the ¯M_n was directly proportional to the monomer conversion.     

Influence of water vapor on the reduction of cuprous chloride to copper microfibers

Reduction of cuprous chloride has been examined in various atmospheres, mostly at 600°C, to produce copper microfibers that can be applied as a filler for electromagnetic interference shielding and electron conductive paste composites. The reduction with hydrogen resulted in formation of a large amount of copper films, but fine particles and short filaments were obtained when carbon black was mixed into the raw material. The most promising copper microfibers with dimensions of several mm length and 1–10 m thickness could be produced with the system CuCl — C — H₂O using argon as a carrier gas, where H₂ and CO formed then probably reduced the vaporized CuCl molecules. Introduction of hydrogen gas into this system increased the yield of copper microfibers, though they became more bent, curved and kinked in shape. However, the morphology of the microfibers is still acceptable as a filler.