Investigation of hydrogen plasma treatment for reducing defects in silicon quantum dot superlattice structure with amorphous silicon carbide matrix

We investigate the effects of hydrogen plasma treatment (HPT) on the properties of silicon quantum dot superlattice films. Hydrogen introduced in the films efficiently passivates silicon and carbon dangling bonds at a treatment temperature of approximately 400°C. The total dangling bond density decreases from 1.1 × 10¹⁹ cm^-3 to 3.7 × 10¹⁷ cm^-3, which is comparable to the defect density of typical hydrogenated amorphous silicon carbide films. A damaged layer is found to form on the surface by HPT; this layer can be easily removed by reactive ion etching.     

Incorporation of Alpha‐Linolenic Acid and Enhancement of n‐3 Fatty Acids in Nile Tilapia: a Factorial Design

A 2² factorial design (two factors at two levels, in triplicate) was performed to investigate the influence of factors A (time of treatment, 15 and 30 days) and B (chia oil content in a supplemented diet, at 2.1 and 4.2 %) in three responses of interest referring to: (a) the incorporation of alpha‐linolenic acid (LNA) in lipids of Nile tilapia fillet; (b) the enhancement of n‐3 fatty acids; and (c) the decrease in the omega‐6/omega3 (n‐6/n‐3) ratio in fish. Factors A and B were significant in the three regression models obtained and the interaction AB was a significant contributor to the LNA and n‐6/n‐3 ratio. Analysis of variance suggested three significant and predictive mathematical models. Response surfaces analyses from designs indicated higher LNA and n‐3 contents and a lower n‐6/n‐3 ratio using both factors A and B in the higher levels (30 days of treatment and 4.2 % of chia oil in the diet for fish) chosen for this study.     

Determination of traction-separation laws on an acrylic adhesive under shear and tensile loading

Structural acrylic adhesives are of special interest because those adhesives are cured at room temperature and can be bonded to oily substrates. To use those adhesives widely for structural bonding, it is necessary to clarify the methodology for predicting strengths of bonding structures with those adhesives. Recently, cohesive zone models (CZMs) have been receiving intensive attentions for simulation of fracture strengths of adhesive joints, especially when bonded with ductile adhesives. The traction-separation laws under mode I and mode II loadings require to estimate fracture toughness of adhesively bonded joints. In this paper, the traction-separation laws of an acrylic adhesive in mode I and mode II were directly obtained from experiments using Arcan type adhesively bonded specimens. The traction-separation laws were determined by simultaneously recording the J-integral and the opening displacements in the directions normal and tangential to the adhesive layer, respectively.     

Prevention of Osteoporosis by Oral Administration of Phytate-Removed and Deamidated Soybean β-Conglycinin

Phytate-removed and deamidated soybean β-conglycinin (PrDS) prepared by ion-exchange resins was supplemented to be 4% in the diet administered to ovariectomized rats to investigate its preventive effect on osteoporosis. The apparent calcium absorption rate decreased following ovariectomy and was not replenished by oral administration of phytate-removed soybean β-conglycinin (PrS) or casein. On the other hand, administration of PrDS restored the calcium absorption rate to the same level as the sham group. Markers of bone resorption, such as serum parathyroid hormone (PTH) and urinary deoxypyridinoline (DPD), increased, and the bone mineral density and breaking stress decreased following ovariectomy. However, PrDS supplementation suppressed the changes caused by the decrease in calcium absorption from the small intestine. Therefore, PrDS supplementation shows promise for the prevention of postmenopausal osteoporosis.     

Star-shaped poly(lactic acid) with carboxylic acid terminal groups via poly-condensation

A series of star-shaped poly(lactic acid)s with carboxylic acid terminal groups have been synthesized by direct poly-condensation of lactic acid in the presence of a poly-carboxylic acid core molecule with triphenylphosphonium trifluoromethanesulfonate (TPP-T) catalyst.These star-polymers had thermal properties not very much different from those of star-shaped poly(lactic acid) with hydroxyl terminal groups and linear poly(lactic acid), irrespective of the structure of the core molecule and number of polymer arms. Solubility and degradability of these star-polymers were, however, greatly enhanced compared to those of star-polymers with hydroxyl terminal groups and increased depending on the number of polymer arms. From the star-shaped polymers, a variety of ammonium salts and the corresponding carboxyamides were successfully prepared.     

High-resolution multi-isotope imaging mass spectrometry enables visualisation of stem cell division and metabolism

MIMS visualises metabolism: A recent publication by Steinhauser and co-workers presents a novel application of multi-isotope mass spectrometry (MIMS) to visualise physiological metabolism in live mammalian organisms, and validate the "immortal strand hypothesis" of asymmetric chromosomal division of stem cells in the small intestine.     

Disorders and oxygen vacancies in p-type Sn2B2O7 (B = Nb,Ta): Role of the B-site element

Sn₂Nb_2−xTa_xO₇ (x = 0.0–2.0) with pyrochlore structure is a promising material for p-type oxide semiconductors. A systematic study of its Nb/Ta ratio indicated that the hole–generation efficiency of the Nb end (Sn₂Nb₂O₇) was an order of magnitude lower than that of the Ta end (Sn₂Ta₂O₇). Although this occurs due to differences in oxygen-vacancy formation, the origins of the hole–generation efficiencies remain unclear due to limited information on local and global crystal-structure disorders in pyrochlore Sn₂Nb₂O₇ and Sn₂Ta₂O₇. In this study, the crystal structures of Sn₂B₂O₇ (B = Nb, Ta), composed of BO₆ octahedra and Sn₄O tetrahedra, were investigated using X-ray absorption spectroscopy and X-ray diffraction. A detailed investigation of the local and global crystal structures indicated a larger amount of disorder in the Sn₄O tetrahedra in Sn₂Nb₂O₇ compared to Sn₂Ta₂O₇; disorder in the BO₆ octahedra occurred only in Sn₂Ta₂O₇. This study indicates that an appropriate selection of the B-site element is vital for suppressing defect and disorder formation in Sn₄O tetrahedra and subsequently improving the hole–carrier–generation efficiency.     

Influence of ash composition on heavy metal emissions in ash melting process

Two kinds of fly ash, discharged in the combustion of either refused derived fuel (RDF) or car shredder dust (SD), were examined for the emission of heavy metals in melting process under oxidizing and reducing conditions. The residual fractions of heavy metal in slag were experimentally estimated. As a result, it was confirmed that several volatile heavy metals were readily emitted during melting process. The type of atmosphere provided for the melting process was found to affect the emission of some volatile metals in RDF ash, but not in SD ash. The emission of volatile heavy metals in RDF ash under oxidizing conditions was lower than under any other conditions in this study. The emission behavior of iron and heavy metals in RDF ash under reducing conditions was similar to that in SD ash. These facts indicated that phosphorous in RDF ash had the property of fixing the volatile metals in the slag only under oxidizing conditions. Then the mixture of SD ash with phosphorous oxide powder was also tested in a melting process, and the result was consistent with the above inference of the effect of phosphorous.     

Cholesterol and fatty acids profile of Brazilian commercial chicken giblets

This study was carried out to determine the chemical composition, cholesterol contents and fatty acids profile of Brazilian commercial chicken giblets. The analysis were performed in gizzard, liver and heart in natura and also in cooked gizzard, fried liver and roasted heart. Fat and cholesterol contents ranged from 0.88% and 72.68 mg/100 g, in cooked gizzard, to 22.19% and 213.18 mg/100 g, in roasted heart. As the fat content gets higher, so does the cholesterol content. Palmitic (C16:0) and stearic acids (C18:0) were the predominant saturated fatty acids (SFA). The C16:0 ranged from 6.39% in cooked gizzard to 18.51% in fried liver. The C18:0 level ranged from 6.62% in roasted heart to 19.19% in cooked gizzard. Linoleic acid (C18:2 omega 6) was the predominant polyunsaturated fatty acid (PUFA). The data revealed that the three different analysed giblets presented a good PUFA/SFA ratio, with values of 1.11, 1.14 and 1.40 for cooked gizzard, fried liver and roasted heart, respectively.     

Aqueous solution properties of a silicone surfactant and its mixed surfactant systems

The aqueous solution properties of a nonionic silicone surfactant of dimethylpolysiloxane and its mixed surfactant systems were studied. It was found that the silicone surfactant has a high surface activity and forms micelles in two steps: premicelles in dilute concentrations and polymolecular micelles above 3.7 × 10⁻⁷ mol dm⁻³. In mixed systems of the silicone surfactant with anionic hydrocarbon or fluorocarbon surfactant, weak intermicellar interactions were found. They are due to electrostatic interaction between hydrophilic groups of the respective micelles. Dye solubilization measurements showed that the solubilized amount of Yellow-OB is greater than predicted by ideal systems. Hydrazo-azo tautomerism is observed in fluorocarbon-silicone surfactant systems, while Yellow-OB is solubilized only in the azo-form in the hydrocarbon-silicone surfactant system.