Collective Shape Oscillation and Domain Formation of Two-Component Bose–Einstein Condensates

In this paper, we describe two kinds of characteristic nonlinear dynamics in two-component Bose–Einstein condensates. For two overlapping components, we analyzed the collective modes and a variety of nonlinear mode couplings, which were then confirmed by numerical simulation of the time-dependent Gross–Pitaevskii equations. Next, we consider the nonlinear dynamics of two condensates after abruptly turning on the intercomponent coupling strength. For strong intercomponent interactions the out-of-phase density wave of the condensates became unstable, leading to mugtiple domain formation.     

Elimination of fictitious penetrating rays from PO and hybridization with AFIM

Physical optics (PO) is an approximation method for high‐frequency scattering and diffraction problems. But PO fields are inaccurate in the shadow region where the source is screened by the scatter. Two key factors of the error for PO are (i) edge diffraction coefficients and (ii) existence of fictitious penetrating rays. The correction with respect to the former has been extensively investigated by many authors using various ray techniques such as GTD, UTD, and UAT. On the other hand, the latter was identified recently by the authors. This paper proposes novel PO‐based calculation procedures termed PO‐AF and PTD‐AF, where PO and Aperture Field Integration Method (AFIM) are merged with the help of special elementary diffraction coefficients. These can uniformly cover the whole angular region and only the error factor (ii) is removed in PO‐AF while both (i) and (ii) are removed in PTD‐AF. The theoretical backgrounds of PO currents are discussed in terms of field equivalence theorem and visualization of EM waves. Next, new methods are proposed and their validity is numerically demonstrated for 2D scattering problems of a strip, a corner reflector, and a cylinder of circular arc. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 1–10, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20037     

Esophageal stimulation by hydrochloric acid causes neurogenic inflammation in the airways in guinea pigs

To investigate whether tachykinins are released in the airways in response to stimulation of the esophagus, we studied the airway plasma extravasation induced by intraesophageal HCl in the presence or absence of neutral endopeptidase inhibitor phosphoramidon and NK1-receptor antagonist FK-888 in anesthetized guinea pigs. The airway plasma leakage was evaluated by measuring extravasated Evans blue dye in the animals pretreated with propranolol and atropine. Infusion of 1 N HCl into the esophagus significantly increased plasma extravasation in the trachea. Phosphoramidon significantly potentiated plasma extravasation in the trachea and main bronchi, whereas FK-888 significantly inhibited that extravasation in a dose-related manner. In the capsaicin-treated animals, airway plasma extravasation was completely inhibited even in the presence of phosphoramidon. Tracheal plasma extravasation potentiated by phosphoramidon was significantly inhibited in the bilateral vagotomized animals. These results suggest that 1) tachykinin-like substances are released to cause plasma extravasation in the airways as a result of intraesophageal HCl stimulation and 2) there are neural pathways communicating between the esophagus and airways, including the vagus nerve.     

DX centers in AlxGa1-xAs bulk alloy,AlAs/GaAs ordered,and disordered superlattices

Properties of theDX centers in Al_0.5Ga_0.5As bulk alloy (b-AL), (AlAs)₂ (GaSa)₂ ordered superlattice (o-SL) and (AlAs) _m (GaAs) _n disordered superlattice (d-SL) (m = 1, 2, 3,n = 1, 2, 3) with the same macroscopic composition were measured and compared. By deconvolution of deep level transient spectroscopy (DLTS) spectrum due to theDX center, we have found a decrease in the number of separate peaks in DLTS spectrum in an intentionally atomic ordered arrangement. Visiting Scholar of the Japan Society for the Promotion of Science. On leave from Department of Electrical Engineering, San Jose State University, San Jose, California 95192-0084, USA.     

Effects of electrode arrangement and pressure on synthesis of diamond films by arc discharge plasma jet chemical vapor deposition

The setup and deposition conditions of electrode arrangement and pressure have been studied to synthesize diamond films at high growth rate on wide area efficiently by arc discharge plasma jet chemical vapor deposition. An apparatus has been used in which four plasma torches, one is used for cathode and the others for divided anodes, are arranged and the positions of these torches are changeable. Growth rate, deposition area and thickness of diamond films have increased with changing the electrode arrangements without improvement of thickness variation. Maximum growth rate of our apparatus has occurred at the pressure of 6.7 kPa and diamond films that have less variations of quality and surface roughness have been synthesized at lower pressure during deposition. Moreover, a high conversion rate, which is the ratio of carbon atoms that form diamond in supplied methane gas, of 16% has been obtained at the pressure of 6.7 kPa and methane concentration of 2%.     

Isolation identification and quantitative culture of Helicobacter pylori from gastric mucosa

The biopsy specimens were homogenized and diluted ten-fold serially in Hank's solution. Each dilution samples were streaked on Skirrow's selective medium. The plates were incubated at 37 degrees C 5 to 7 days under micro-aerobic condition and counting the viable cell of H. pylori. The positive rate of specimens with H. pylori in active gastric ulcer tissue (62.0%) was higher than that in scarred tissue (51.9%). Number of H. pylori viable cells in active ulcer tissue was significantly larger than in scarred tissue. The positive correlation between Raw's gastritis score of specimens from patients with erosive gastritis and number of H. pylori viable cells was clearly noticed.     

Effects of Environmental Temperature and Compression Energy on Polymorphic Transformation During Tabletting

The effects of temperature on the polymorphic transformation and the compression of chlorpropamlde forms A and C during tabletting were investigated by X-ray diffractometry. The X-ray diffraction profiles of the sample powders deagglomerated after compression were recorded to calculate the degree of polymorphic transformation. A single punch eccentric tabletting machine equipped with two load cells (upper and lower punches) and with a noncontact displacement transducer was used to measure the compression stress, energy and distance between punches. A heater and a liquid nitrogen pool were mounted on the die of the tabletting machine, and the die temperature was controlled with a thermocontroller. Two types of compression methods, multi-tabletting at room temperature and single tabletting at 0-45°C, were used in the present study. In the first method, the stable form A or metastable form C was loaded in to the die and the sample was compressed with a compression stress of 196 MPa. Compression was repeated from 1 to 30 times. The results for forms A and C suggested that both forms were mutually transformed, and that the content of forms A and C reached equilibrium above 100 J/g of compression energy after more than 10-times compression. After 30-times compression, the content of A, C, and the noncrystalline solid form were almost constant at about 45%, 25% and 30%, respectively. The compression energy was estimated to be 500-600 J/g. In the second method, single tabletting at 0° and 45°C, the amount of form C transformed from form A at 45°C was about two times larger than that at 0°C at the same compression energy. The amount of form A transformed from form C at 45°C was almost the same as that transformed at 0°C. This suggests that the mechanochemical stability of form A was affected by compression temperature, while that of form C was independent of temperature. The crushing strength (CS) of from A tablet was about two times higher than that of form C even at the same porosity. The relationships between log (CS) of form A tablets compressed at 0 or 45°C and porosity showed straight lines with the same slope, but the slope for form C tablets compressed at 45°C was smaller than that for those compression at 0°C. From these results it appears that the transformation mechanism of forms A and C during compression was as follows: Form A or C was converted to a noncrystalline solid by mechanical energy, and then the solid was transformed into form A or C. The transformation of every form was affected by the environmental temperature.     

A far-infrared spectroscopic study of low temperature soft phonon mode in Tris-Sarcosine Calcium Chloride(TSCC)

Temperature dependences of the soft phonon frequency and the damping constant in Tris-Sarcosine Calcium Chloride (TSCC) single crystal have been investigated between 5K and 100K by using a Fourier-transform far-infrared spectrometer. It has been observed that the soft phonon frequency decreases gradually and the damping constant increases as the transition temperature is approached from below The damping constant varies from 7cm^-1 a 90K to less than 0.5cm^-1 at 5K. It has been found that the damping constant is approximately proportional to temperature below about 60K.     

Flexural properties of moldings of rigid polyurethane made by reaction injection molding

Flexural properties of moldings made by Reaction Injection Molding (RIM), which are structural foams consisting of high density skin and low density core, were investigated by three-point bending tests. Two failure modes were observed in bending tests of the moldings made by RIM, and they are classified as follows according to the density ratio of skin layer to core layer: the opposite side of the skin layer to which load was subjected failed by tensile stress: and the same side of the skin layer to which load was subjected failed by compressive stress, causing wrinkling or buckling. Then the conventional composite beam theory was applied to the former failure mode and Hoff s buckling theory to the latter, and equations were derived to predict the flexural properties of the structural foams, which involved buckling from the flexural properties of solid construction. In addition, it has been shown that there exists a density distribution that maximizes the flexural strength of the moldings made by RIM with a given overall density. The results obtained here should be useful to the optimum structural design of moldings made by RIM.