Dynamic Changes in Reactive Oxygen Species in the Shoot Apex Contribute to Stem Cell Death in Arabidopsis thaliana

In monocarpic plants, stem cells are fated to die. However, the potential mechanism of stem cell death has remained elusive. Here, we reveal that the levels of two forms of reactive oxygen species (ROS), superoxide anion free radical (O2·−) and hydrogen peroxide (H₂O₂), show dynamic changes in the shoot apex during the plant life cycle of Arabidopsis thaliana. We found that the level of O2·− decreased and disappeared at four weeks after bolting (WAB), while H₂O₂ appeared at 3 WAB and showed a burst at 5 WAB. The timing of dynamic changes in O2·− and H₂O₂ was delayed for approximately three weeks in clv3-2, which has a longer lifespan. Moreover, exogenous application of H₂O₂ inhibited the expression of the stem cell determinant WUSCHEL (WUS) and promoted the expression of the developmentally programmed cell death (dPCD) marker gene ORESARA 1 (ORE1). These results indicate that H₂O₂ triggers an important signal inducing dPCD in stem cells. Given that O2·− plays roles in maintaining WUS expression and stem cell activity, we speculate that the dynamic shift from O2·− to H₂O₂ in the shoot apex results in stem cell death. Our findings provide novel insights for understanding ROS-mediated regulation during plant stem cell death.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.     

GPC Profile Change of Potato Starch with Extrusion Processing

Native potato starch (moisture content 15%) was treated by twin screw extruder under four operating conditions with varying barrel temperatures (110°C–230°C). These modified starch samples were compared to native and drum-dried starch. Starch sample solution for gel chromatography was prepared by the three methods (acidic, alkaline, and neutral methods). They were subjected to gel chromatography on Toyopearl HW-75, and some difference was found among the three gel chromatographic patterns obtained from the same starch solution. This discrepancy among GPC patterns suggests formation of some types of anhydro-bonds between chains of amylopectin and or amylose in the extrusion process. Elevating barrel temperature increases degree of depolymerization. The size of fragments formed with the treatment is bigger than that of oligosaccharides but smaller than that of amylose.     

Vitamin E reduces cholesterol esterification and uptake of acetylated low density lipoprotein in macrophages

The effects of vitamin E on cholesteryl ester (CE) metabolism in 1774 cells were examined. Pretreatment of 1774 cells with vitamin E at concentrations above 50 μM significantly decreased acetylated low density lipoprotein (LDL)-induced incorporation of [¹⁴C]oleate into CF in cells in a dose-dependent manner. This was partly due to vitamin E Also significantly inhibiting the uptake of [³H]CE-labeled acetylated LDL by 1774 cells. A trend existed toward suppression of acyl-CoA:cholesterol acyltransferase (ACAT) activity in the cell lysate at high vitamin E concentration, but there was no effect on hydrolysis of CE. These data indicate that vitamin E reduces the uptake of modified LDL and suppresses ACAT activity, resulting in less cholesterol esterification in macrophages; a novel mechanism underlying the antiatherogenic properties of vitamin E.     

Investigation of hydrogen plasma treatment for reducing defects in silicon quantum dot superlattice structure with amorphous silicon carbide matrix

We investigate the effects of hydrogen plasma treatment (HPT) on the properties of silicon quantum dot superlattice films. Hydrogen introduced in the films efficiently passivates silicon and carbon dangling bonds at a treatment temperature of approximately 400°C. The total dangling bond density decreases from 1.1 × 10¹⁹ cm^-3 to 3.7 × 10¹⁷ cm^-3, which is comparable to the defect density of typical hydrogenated amorphous silicon carbide films. A damaged layer is found to form on the surface by HPT; this layer can be easily removed by reactive ion etching.     

An Additional Insight into the Correlation between the Distribution Ratios and the Aqueous Acidity of the TODGA System

Abstract

Extraction of Eu(III) and Am(III) from HNO₃ into the organic solvents using N,N,N′,N′‐tetraoctyl‐diglycolamide (TODGA) was investigated in order to study the detailed extraction reaction. The chemical species: 1:2 for metal:TODGA complex is present in polar diluents. On the other hand, the metal complexes need three or more TODGA molecules to remain stable in non‐polar diluents. The HNO₃ concentration dependence on the distribution ratio suggests that HNO₃ participates in the metal extraction. Infrared spectra indicate that the carbonyl oxygen coordinates with Eu(III), and luminescence lifetimes suggest that there are no water molecules in the inner coordination sphere of the extracted Eu‐complex.     

Immobilization of glucose oxidase on nonwoven fabrics with bombyx mori silk fibroin gel

The enzyme glucose oxidase (GOD) was immobilized on the nonwoven fabrics, which have excellent properties in diffusivity of substrates, mechanical strength, and handling, with Bombyx mori silk fibroin gel. The nonwoven fabrics of silk fibroin, viscose rayon, poly-ethyleneterephthalate, 6-nylon, and polypropylene with activated surface by fluoline treatment were used. The stabilities of GOD to heat or pH changes were much improved by the immobilization as well as the case of the GOD immobilized in the silk fibroin membrane. Among nonwoven fabrics, silk fibroin was the most excellent support material for the immobilization of GOD although all nonwoven fabrics used here are able to be used as the support materials. The increase of the sensitivity was observed when the glucose sensor was made with the GOD immobilized on nonwoven silk fabrics as four times compared with the case of the GOD immobilized in the silk fibroin membrane.     

Two types of a passive safety containment for a near future BWR with active and passive safety systems

The paper presents two types of a passive safety containment for a near future BWR. They are named Mark S and Mark X containment. One of their common merits is very low peak pressure at severe accidents without venting the containment atmosphere to the environment. The PCV pressure can be moderated within the design pressure. Another merit is the capability to submerge the PCV and the RPV above the core level. The third merit is robustness against external events such as a large commercial airplane crash. Both the containments have a passive cooling core catcher that has radial cooling channels. The Mark S containment is made of reinforced concrete and applicable to a large power BWR up to 1830 MWe. The Mark X containment has the steel secondary containment and can be cooled by natural circulation of outside air. It can accommodate a medium power BWR up to 1380 MWe. In both cases the plants have active and passive safety systems constituting in-depth hybrid safety (IDHS). The IDHS provides not only hardware diversity between active and passive safety systems but also more importantly diversity of the ultimate heat sinks between the atmosphere and the sea water. Although the plant concept discussed in the paper uses well-established technology, plant performance including economy is innovatively and evolutionally improved. Nothing is new in the hardware but everything is new in the performance.     

Study of crater formation and sputtering process with large gas cluster impact by molecular dynamics simulations

Molecular dynamics (MD) simulations of large argon clusters impacting on silicon solid targets were performed in order to study the transient process of crater formation and sputtering. The MD simulations demonstrate that the initial momentum of incident cluster is transferred to target surface atoms through multiple collision mechanism, where the initial momentum, which is along to the surface normal before impact, is deflected to lateral direction. This momentum transfer process was analyzed by the calculation of the velocity at the crater edge (the interface between cluster and target). In the case of Ar₁₀₀₀ cluster impact on Si(1 0 0) target at low energy per atom less than 40 eV/atom, the maximum value of lateral velocity of the crater edge increases in proportional to the velocity of incident cluster atoms. On the other hand, the crater edge velocity saturates over 40 eV/atom of incident energy per atom. In this case, the whole of constituent cluster atoms are implanted into the target and expand in both lateral and reflective directions at the subsurface region of the target. These MD simulations demonstrated that this collisional process result in the high yield sputtering of the target atoms.     

Mumefural and related HMF derivatives from Japanese apricot fruit juice concentrate show multiple inhibitory effects on pandemic influenza A (H1N1) virus

Fruit-juice concentrate of Japanese apricot (Prunus mume Sieb. et Zucc.) has been shown to be effective against influenza A infection in MDCK cells. In this study, we isolated five components from the fruit-juice concentrate of Japanese apricot, 5-(hydroxymethyl)-2-formylfuran (HMF), 1-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (mumefural, MF), 2-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (MF‘), 1-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA1) and 2-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA2), and investigated their inhibitory activities against the novel influenza A/Narita/1/2009 (H1N1) pandemic virus hemagglutinin and neuraminidase functions, which are essential for viral attachment and budding, respectively. An hemagglutination inhibition assay indicated that MF and MF‘ were effective at minimum hemagglutination concentrations of 3.1 and 6.3 mM, respectively. An inhibition study for sialidase activity of the neuraminidase spike showed that MF was the most active anti-sialidase compound with an IC₅₀ value of 0.21 ± 0.01 mM, followed by MA2 (IC₅₀, 0.71 ± 0.09 mM), MA1 (IC₅₀, 1.64 ± 0.31 mM) and MF‘(IC₅₀, 1.62 ± 0.22 mM). Furthermore, MF was shown to inhibit the growth of the pandemic virus in a dose-dependent manner (62 ± 3% inhibition at 5 mM). The results suggest that MF, a citric acid ester linked to HMF at the 1-position of the propane backbone, might be a lead compound for the development of anti-influenza A inhibitors.