Evaluation of method for simultaneous determination of pesticide residues in fruits and vegetables by collaborative study

A collaborative study involving 8 laboratories was conducted to evaluate a method for the simultaneous determination of pesticide residues in 6 types of fruits and vegetables (spinach, tomato, apple, radish, cabbage and carrot). The method of analysis was the same as reported by Kakimoto et al. in 2003. One hundred and thirty-nine pesticides were spiked by each of 8 laboratories at levels of 0.1 microg/g (pesticides analyzed by GC/MS) or 0.5 microg/g (pesticides analyzed by HPLC) into the 6 kinds of samples. Statistical analysis showed that 111 pesticides could be analyzed with practical precision by this method. For screening purposes, the method could analyze 118 pesticides. The median values of the limits of detection were 0.001-0.041 microg/g. The calibration curves were linear in the range of 0.5-5 microg/mL for most pesticides with median correlation coefficients of 0.983-1.000.     

Hydration of halide anions in ion-exchange resin and their dissociation from cationic groups

The local structures of Cl- and Br- in an anion-exchange resin have been investigated by X-ray absorption fine structure (XAFS). The resins, which have been equilibrated under various partial water vapor pressures to allow the anions to have various hydration numbers, are provided for XAFS measurements. The XAFS spectra indicate that two scattering groups around the counteranion are present, that is, water molecules and an ion-exchange group. Regression analyses allow the separation of the contributions from these two scattering groups; thus, the average hydration number (N) is determined. The hydration number linearly increases with increasing the number of water molecules (n) adsorbed by an ion-exchange pair (an ion-exchange group and a counteranion) until the ion-exchange pair adsorbs ca. 3 water molecules, indicating that all of the adsorbed water molecules coordinate the counteranion. However, an increase in N with increasing n becomes small as n exceeds 3; N finally reaches 3.9 (+/-0.4) for Cl- and ca. 3.4 (+/-0.5) for Br-. Detailed studies of the water adsorption isotherms imply that the maximum hydration number of these anions is three when they are bound by the ion-exchange groups, and as more water molecules are supplied, they are dissociated from the ion-exchange groups; ca. 40% of total counteranions are dissociated from the ion-exchange groups.     

Defect levels in chromium-doped silicon

The transient capacitance technique has been used to study the chromium-related levels in the silicon band gap. Chromium was diffused at temperature of 1100 and 1150°C for 0.5 and 3 hr. Five different levels at E_c?0.11 eV, E_c?0.21 eV, E_c?0.28 eV, E_c?0.36 eV and E_c?0.45 eV were obtained from the Arrheniu plots of the electron thermal-emission rates. The number of levels in the upper half of the band gap decreased from five to two with an increase of Cr-diffusion period. Two levels were located at E_c?0.20 eV (donor) and E_c?0.43 eV (acceptor). A donor level was also observed at E_v + 0.25 eV. The donor level was not affected by the diffusion condition. The majority carrier capture cross sections of the three dominant levels have been measured by the transient capacitance technique modified by the pulse transformer. The values were σ_n = 4.1 × 10^?15 cm² for the upper donor at E_c?0.20 eV, σ_n = 2.0 × 10^?16 cm² for the acceptor at E_c ?0.43 eV and σ_p = 9.1 × 10^?18 cm² for the lower donor at E_v + 0.25 eV, and were independent of temperature. The three dominant levels are due to distinct chromium centers.     

Rate of emulsion polymerization of styrene

In emulsion polymerization, the Smith and Ewart theory gives about two or three times the number of polymer particles obtained by experiment. In this paper, a reaction model is proposed which, from the standpoint of reactor design, can give an adequate explanation of the whole course of an emulsion polymerization of monomer highly insoluble in water. Among other things, the generating process of polymer particles is examined in detail. It is demonstrated experimentally that a new parameter proposed here, which represents the degree of difficulty of monomer initiation in micelles, is indispensable in explaining that process. Also confirmed is that monomer initiation takes place more easily in polymer particles than in micelles. According to the new model, the progress of polymerization, i.e., monomer conversion, the number of the polymer particles, and properties of polymer thus produced can be estimated with satisfactory accuracy. Furthermore, approximate equations are derived for easier estimation.     

Effects of hydrophilicity of crosslinker on membrane properties of poly(N-hydroxyethyl-L-glutamine) hydrogels

Summary Poly(N-hydroxyethyl-L-glutamine) (PHEG) hydrogels were prepared by aminolysis of poly( -benzyl L-glutamate) with 2-aminoethanol and hydrophobic or hydrophilic crosslinkers, and the effect of the hydrophobicity of the crosslinkers was evaluated. The swelling properties, tensile properties and enzymatic degradation behavior were studied in phosphate buffered saline (PBS). The swelling ratio and degradation rate of these hydrogels were highly dependent on the hydrophobicity of the crosslinkers, while tensile properties were dependent on the swelling ratio, but not on the hydrophobicity of the crosskinkers.     

Measurement of air turbulence for on-machine interferometry

There is increasing demand for in situ shape measurements performed on ultraprecision processing machines. One major source of error during interferometric measurements performed on machines is fringe displacement due to external disturbances. We have developed an interferometer equipped with an electro-optic phase modulator that measures the phase of interference fringes before they are displaced by air turbulence. The frequency characteristics of air turbulence induced by a heat source are derived from successive measurements of a test surface. Experimental results show that the phase of the interference fringes can be accurately measured in the presence of air turbulence when the intensity of the fringes is sampled at a speed of several hundred hertz.     

Synthesis and properties of ellipsoidal hematite/silicone core-shell particles

Monodispersed ellipsoidal hematite particles were synthesized and coated with silicone using a silane-coupling agent, phenyltriethoxysilane. The thickness of the silicone shell was controlled by the concentration of phenyltriethoxysilane and the presence of n-hexadecyltrimethylammonium chloride, which was thought to modify the surface properties of the hematite particles to be organophilic. The hematite/silicone core-shell particles were strongly hydrophobic and had a good dispersibility and stability in toluene. Hollow ellipsoidal silicone particles were obtained by the dissolution of hematite with hydrochloric acid from the core-shell particles.     

Dissipation of Gross-Pitaevskii Turbulence Coupled with Thermal Excitations

Microscopic dissipation mechanism of quantized vortices in quantum fluid is studied numerically by solving the Gross-Pitaevskii equation coupled with the Bogoliubov-de-Gennes equation for thermal excitations. At low temperatures, dissipation works at smaller scales than the vortex core size, which supports the self-similar cascade process of quantized vortices at large scales and the Kolmogorov energy spectrum of quantum turbulence. On the other hand, this dissipation spreads to larger scales at high temperatures, and directly affects the vortex dynamics. This effect of dissipation at high temperatures is qualitatively similar to the mutual friction in superfluid ⁴He.     

Performance Improvement of Current Source Inverter-Fed Induction Motor Drives

A high performance variable speed drive system using current source inverter fed induction motor is described. The principle of the drive control is based on the field-orientation method, where the stator current is used as the vector quantity. To improve the system response and to operate smoothly at low speed, a current pulsewidth modulation (PWM) control is provided by means of a feedback loop. This system operates stably and shows a high dynamic performance in a wide range, from zero to rated speed. Dual current source inverter is applied to this drive system which results in a remarkably low copper loss of the motor, even in PWM operation.