Relative contributions of expressive behavior and contextual information to the judgment of the emotional state of another.

Used a technique for assessing the relative impact of facial–gestural expressions, as opposed to contextual information regarding the elicitor and situation, on the judgment of emotion. In Study 1, 28 undergraduates rated videotapes of spontaneous facial–gestural expressions and separately rated the emotionally loaded color slides that elicited those expressions. The source clarities of the expressions and slides were matched using correlation and distance measures, and 18 expressions and 9 slides were selected. In Study 2, 72 undergraduate receivers were shown systematic pairings of these expressions and slides and rated the emotional state of the expresser, who was supposedly watching that slide under public or private situational conditions. Expressions were found to be more important sources for all emotion judgments. For female receivers slides were relatively more important in the public than the private situation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

XPS and IR study of electrochemically or chemically redoped poly(3-methylthienylene) films

XPS (X-ray photoemission spectroscopy) and IR (infrared) analyses of poly(3-methylthienylene) films, electrochemically or chemically redoped0 with various chemical species at varying doping levels, have been investigated. On the basis of these results, the major chemical species of dopants have been identified. As a results, the dopant content was determined and the poly(3-methylthienylene) films were classified as light or heavy by doping level. The conductivity ranged from about 10^?12 to 10₂ S cm^?1 for all the films investigated. The conductivity and the activation energy of conduction for the heavily-doped films vary as a function of the dopant content, independent of the different chemical species of dopants. In particular, a sudden change is observed in the dependence of activation energy on dopant content. This sudden change may be associated with the semi-conductor-metal transition. Furthermore, it is shown that the specific absorption bands in the infrared are induced by the doping, intensified with increasing dopant uptake and accompanied by an increase in conductivity.     

Fundamental study of high Q‐factor RF spiral inductor using carbonyl‐iron/epoxy composite magnetic core

In order to increase the Q‐factor of an RF spiral inductor used in the RF front‐end circuit of smartphone handsets, we introduced a carbonyl‐iron/epoxy composite magnetic core in the air‐core spiral inductor. The composite magnetic core, which was made by metal‐mask printing, consisted of carbonyl‐iron powder of 1.1 μm mean diameter and an epoxy resin matrix. We found that the 45 vol.% CIP composite magnetic core had a saturation magnetization of 0.9 T, relative permeability of ∼6, and loss tangent (tan δ) of ∼0.2 at 1 GHz. A two‐turn copper spiral inductor fabricated with the composite magnetic core filled only in the spacing between the conductor lines showed a clear Q‐factor increase of ∼29% compared to the air‐core spiral inductor at 1 GHz. Thus we obtained a substantial increase in the Q‐factor by the embedded composite magnetic core in the spacing between the conductor lines. The main reason for this is that the magnetic flux passing through the conductor lines was decreased by the magnetic core embedded in the spacing between conductor lines as a result of the magnetic flux passing mainly through the embedded magnetic core. Therefore, proximity effect is suppressed in the conductor line of the spiral coil. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Structurally Diverse Polyamines: Solid‐Phase Synthesis and Interaction with DNA

A versatile solid‐phase approach based on peptide chemistry was used to construct four classes of structurally diverse polyamines with modified backbones: linear, partially constrained, branched, and cyclic. Their effects on DNA duplex stability and structure were examined. The polyamines showed distinct activities, thus highlighting the importance of polyamine backbone structure. Interestingly, the rank order of polyamine ability for DNA compaction was different to that for their effects on circular dichroism and melting temperature, thus indicating that these polyamines have distinct effects on secondary and higher‐order structures of DNA.     

Study of an annular laser beam based axially-fed powder cladding process

An annular laser beam based powder cladding head, which enables an axial powder feeding and variation of the laser beam intensity distribution (LBID) on the workpiece surface is presented. The influence of typical LBIDs, including Ring, Tophat(?), Tophat(+), and Gaussian-like, on a cladding process has been characterized based on the process and melt pool visualization, powder catchment efficiency, clad layer geometry, and porosity. The results showed that the most stable process without plasma formation but with low dilution and porosity of the clad layer can be achieved within the range from a Ring to a Tophat(?) LBID. Additionally, axial powder feeding results in a high powder catchment efficiency above 80%.     

InGaP//GaAs//c‐Si 3‐junction solar cells employing spectrum‐splitting system

In this work, we practically demonstrated spectrum‐splitting approach for advances in efficiency of photovoltaic cells. Firstly, a‐Si:H//c‐Si 2‐junction configuration was designed, which exhibited 24.4% efficiency with the spectrum splitting at 620 nm. Then, we improved the top cell property by employing InGaP cells instead of the a‐Si:H, resulting in an achievement of efficiency about 28.8%. In addition, we constructed 3‐junction spectrum‐splitting system with two optical splitters, and GaAs solar cells as middle cell. This InGaP//GaAs//c‐Si architecture was found to deliver 30.9% conversion efficiency. Our splitting system includes convex lenses for light concentration about 10 suns, which provided concentrated efficiency exceeding 33.0%. These results suggest that our demonstration of 3‐junction spectrum‐splitting approach can be a promising candidate for highly efficient photovoltaic technologies. Copyright © 2016 John Wiley & Sons, Ltd.     

Measurement Scheme for One‐Way Delay Variation with Detection and Removal of Clock Skew

One‐way delay variation (OWDV) has become increasingly of interest to researchers as a way to evaluate network state and service quality, especially for real‐time and streaming services such as voice‐over‐Internet‐protocol (VoIP) and video. Many schemes for OWDV measurement require clock synchronization through the global‐positioning system (GPS) or network time protocol. In clock‐synchronized approaches, the accuracy of OWDV measurement depends on the accuracy of the clock synchronization. GPS provides highly accurate clock synchronization. However, the deployment of GPS on legacy network equipment might be slow and costly. This paper proposes a method for measuring OWDV that dispenses with clock synchronization. The clock synchronization problem is mainly caused by clock skew. The proposed approach is based on the measurement of inter‐packet delay and accumulated OWDV. This paper shows the performance of the proposed scheme via simulations and through experiments in a VoIP network. The presented simulation and measurement results indicate that clock skew can be efficiently measured and removed and that OWDV can be measured without requiring clock synchronization.     

Decreasing resistances of membrane-electrode assemblies containing hydrocarbon-based ionomers for improving their anodic performances

To improve methanol-oxidation performances of membrane-electrode assemblies composed of a hydrocarbon-based ionomers, the resistances involved in the reaction were decreased. Electrochemical impedance spectroscopy revealed that the proton-conductive resistance (R_i) in the anode was decreased from 0.54 to 0.40 Ω cm² by increasing a loading ratio of platinum-ruthenium to carbon support of anode catalyst from 54 to 73 wt.%. In addition, R_i was decreased to be 0.25 Ω cm² by increasing ion-exchange capacity (IEC) of the ionomer from 1.4 to 2.9 mequiv. g⁻¹. Consequently, the polarization resistance of the anode was significantly decreased, in turn, increasing current density of methanol oxidation at the potential of 0.45 V from 0.110 to 0.244 A cm⁻².     

Evidence for Altered Phosphoinositide Signaling-Associated Molecules in the Postmortem Prefrontal Cortex of Patients with Schizophrenia

Phosphoinositides (PIs) play important roles in the structure and function of the brain. Associations between PIs and the pathophysiology of schizophrenia have been studied. However, the significance of the PI metabolic pathway in the pathology of schizophrenia is unknown. We examined the expression of PI signaling-associated proteins in the postmortem brain of schizophrenia patients. Protein expression levels of phosphatidylinositol 4-phosphate 5-kinase type-1 gamma (PIP5K1C), phosphatidylinositol 4-kinase alpha (PIK4CA, also known as PIK4A), phosphatase and tensin homolog deleted from chromosome 10 (PTEN), protein kinase B (Akt), and glycogen synthase kinase 3β (GSK3β) were measured using enzyme-linked immunosorbent assays and multiplex fluorescent bead-based immunoassays of the prefrontal cortex (PFC) of postmortem samples from 23 schizophrenia patients and 47 normal controls. We also examined the association between PIK4CA expression and its genetic variants in the same brain samples. PIK4CA expression was lower, whereas Akt expression was higher, in the PFC of schizophrenia patients than in that of controls; PIP5K1C, PTEN, and GSK3β expression was not different. No single-nucleotide polymorphism significantly affected protein expression. We identified molecules involved in the pathology of schizophrenia via this lipid metabolic pathway. These results suggest that PIK4CA is involved in the mechanism underlying the pathogenesis of schizophrenia and is a potential novel therapeutic target.