Influence of ash composition on heavy metal emissions in ash melting process

Two kinds of fly ash, discharged in the combustion of either refused derived fuel (RDF) or car shredder dust (SD), were examined for the emission of heavy metals in melting process under oxidizing and reducing conditions. The residual fractions of heavy metal in slag were experimentally estimated. As a result, it was confirmed that several volatile heavy metals were readily emitted during melting process. The type of atmosphere provided for the melting process was found to affect the emission of some volatile metals in RDF ash, but not in SD ash. The emission of volatile heavy metals in RDF ash under oxidizing conditions was lower than under any other conditions in this study. The emission behavior of iron and heavy metals in RDF ash under reducing conditions was similar to that in SD ash. These facts indicated that phosphorous in RDF ash had the property of fixing the volatile metals in the slag only under oxidizing conditions. Then the mixture of SD ash with phosphorous oxide powder was also tested in a melting process, and the result was consistent with the above inference of the effect of phosphorous.     

Crystal growth and scintillation properties of Nd-doped Lu3Al5O12 single crystals with different Nd concentrations

Nd 0.1%, 0.5%, 1% and 3% doped Lu₃Al₅O₁₂ (Nd:LuAG) single crystals were grown in the nitrogen atmosphere by the micro-pulling down (μ-PD) method. The grown crystals had a single-phase confirmed by powder XRD analysis. In absorption spectra, some weak absorption lines due to Nd³⁺ 4f-4f transitions were observed and their intensity increased with the increase of Nd concentration. When excited by ²⁴¹Am α-ray, a broad emission peak due to defects in the host lattice at 320 nm and some sharp lines due to Nd³⁺ 4f-4f transitions at wavelength longer than 400 nm were observed. The decay time profiles of Nd:LuAG under γ-ray excitation were well approximated by two exponential function of 340-760 ns and 3-5 μs for each sample. By pulse height measurement using ¹³⁷Cs, Nd 0.5%:LuAG showed the highest light yield of 7600 ± 760 photons/MeV.     

Influence of tungsten–carbon mixed layer and irradiation defects on deuterium retention behavior in tungsten

The D₂⁺ fluence dependence on deuterium (D) retention was studied to clarify the D retention mechanism in tungsten. The additional D desorption stage was observed around 660 K in the TDS spectrum for a sample implanted with D₂⁺ up to the fluence of 10²³ D⁺ m^?2, which desorption stage was not observed the D₂⁺ implanted sample with the fluence less than 10²² D⁺ m^?2. The TEM observation showed that the highly dense voids were formed in tungsten by D₂⁺ implantation with the fluence of 10²³ D⁺ m^?2, considering that the D would be trapped by voids. To understand the D trapping by voids in C⁺ implanted tungsten, C⁺–D₂⁺ sequential implantation experiments at various C⁺ implantation temperatures were performed. It was found that the amount of D desorbed around 560 K was increased by increasing the C⁺ implantation temperature. The formation of the voids was observed with increasing the C⁺ implantation temperature by TEM, indicating that the increase of D desorption around 560 K was caused by the formation of voids. However, the desorption temperature of D trapped by voids in C⁺ implanted sample was lower than that in D₂⁺ implanted one. TEM observation and XPS measurement indicated that this difference was caused by the increase of void size and/or the presence of implanted carbon.     

Synthesis of sulfonated organic–inorganic hybrids through the radical copolymerization of vinyl sulfonate esters and vinyl trialkoxysilanes

Novel organic–inorganic hybrids with sulfonic acid groups were prepared using random copolymers composed of vinyl sulfonate esters and vinyl trialkoxysilanes. Five vinyl sulfonate esters with different substituent groups were employed as protecting monomers for the production of the poly(vinyl sulfonic acid) component, and three vinyl trialkoxysilanes were used as cross-linkable monomers. Free radical and reversible addition-fragmentation chain transfer (RAFT) copolymerizations were performed for the production of random copolymers with two different functional groups. The selective deprotection of the sulfonate esters of the copolymers proceeded smoothly and resulted in the formation of copolymers with lithium vinyl sulfonate units and cross-linkable trialkoxysilane units. The co-condensation of the trialkoxysilane moieties in the deprotected copolymers with cross-linkers yielded transparent hybrid films that contained lithium sulfonate groups without aromatic rings or ester linkages.     

Oxidative Dehydrogenation of Propane with CO2 Over Cr/H[B]MFI Catalysts

Abstract  

Cr/silicalite-1 and Cr/H[B]MFI catalysts were prepared by the impregnation method, and Cr/H[B]MFI were further treated by steaming. The catalysts were employed for the oxidative dehydrogenation of propane to propylene with CO₂ as the oxidant. Cr/H[B]MFI showed significantly higher catalytic activity than Cr/silicalite-1, and steamed Cr/H[B]MFI was superior in the reaction stability to Cr/H[B]MFI. The nature of the supported chromium species have been characterized by a number of physicochemical techniques, such as Raman, UV–vis and NMR. It is concluded that the steaming led to the auto-reduction of some Cr⁶⁺ to Cr³⁺, and resultant Cr³⁺ species might be located near the boron center in the borosilicate framework to counterbalance the negative charge of the framework. The transformation of Cr⁶⁺ species to Cr³⁺ species, facilitated by the steaming process and the presence of boron in the catalyst, is responsible for the enhanced stability of oxidative dehydrogenation of propane to propylene with carbon dioxide as the oxidant.     

Heterogeneous Catalysis by Heteropoly Compounds of Molybdenum and Tungsten

Heteropolyanions are polymeric oxoanions which are formed by the condensation of more than two different oxoanions [Eq. (1)l. Polyanions consisting of one kind of oxoanion are called isopolyanions [Eq. (2)]. Acidic elements such as Mo, W, V, Nb, and Ta are present as oxoanions in aqueous solutions and polymerize to form polyanions at low pH. Free acids (or acid forms) of these species are called heteropoly and isopoly acids, respectively. Here, the term “heteropoly compounds” is used for heteropoly acids and their salts.     

Kinetics of solid acid catalyzed 1-octene reactions with TiO2 in sub- and supercritical water

Acid catalyzed reactions of 1-octene on TiO₂ in sub- and supercritical water were investigated (T = 250-450 °C, P = 11-33 MPa). The main products were 2-octene and 2-octanol. Additionally, other liner C₈ alkenes and liner secondary C₈ alcohols were produced as by-products. Through kinetic analysis, acid catalyzed reactions can divide into the reaction catalyzed by Lewis acidic sites on TiO₂ and the reaction catalyzed by protons produced by the dissociation of water molecules. Each type of the reaction is affected by water density or ionic product of water, respectively, therefore, reaction mechanism changes with temperature and pressure. From the contribution of each reaction type, the temperature dependence of cis/trans ratio of produced 2-octene could also be explained.     

Impact of Serum Chemerin Levels on Liver Functional Reserves and Platelet Counts in Patients with Hepatocellular Carcinoma

Obesity-related metabolic abnormalities, including adipokine imbalance and chronic inflammation, are involved in liver carcinogenesis. Chemerin, a novel adipokine, plays a critical role in adipogenesis, energy metabolism, and inflammation. We evaluated the impact of serum chemerin levels on liver functional reserves in hepatocellular carcinoma (HCC) patients and on the recurrence and prognosis of HCC. This study included 44 patients with any stage of HCC who underwent curative treatment at Gifu Municipal Hospital (Gifu, Japan) between 2006 and 2007. Recurrence-free survival and overall survival were estimated using the Kaplan-Meier method. Serum albumin levels (Pearson’s correlation coefficient; r = 0.3110, p = 0.0399), platelet counts (r = 0.4159, p = 0.0050), and prothrombin times (r = 0.3775, p = 0.0115) were significantly correlated with serum chemerin levels in patients with HCC, and they were inversely correlated with Child-Pugh scores (r = −0.3732, p = 0.0126), serum alanine aminotransferase levels (r = −0.3864, p = 0.0105), and total bilirubin levels (r = −0.4023, p = 0.0068). Among these variables, a multiple comparison test identified that platelet counts and total bilirubin levels were associated with serum chemerin levels (p < 0.0083). No significant correlation was found between serum chemerin levels and recurrence-free survival (p = 0.3691) or overall survival (p = 0.7916). In HCC patients, serum chemerin concentrations were correlated with liver functional reserves and platelet counts, but not with recurrence or prognosis.     

Numerical Simulation of Sterilization Processes for Shear‐Thinning Food in Taylor‐Couette Flow Systems

The performance of the Taylor‐Couette flow apparatus as a heat sterilizer is numerically investigated. The destruction of Clostridium botulinum and thiamine (vitamin B1) was selected as model reaction. When Taylor vortices were formed in the annular space, the heat transfer significantly enhanced as compared to the case without vortex flow. As a result, the equivalent lethality calculated from the temperature field increased, which is regarded as a quantum leap. Conversely, the improvement of heat transfer induced destruction of thiamine. These results suggest that there is a trade‐off relationship between the enhancement of heat transfer and the avoidance of thermal destruction of nutritional components. In conclusion, the Taylor‐Couette flow sterilizer has the potential for process intensification in heat sterilization processes.