An Additional Insight into the Correlation between the Distribution Ratios and the Aqueous Acidity of the TODGA System

Abstract

Extraction of Eu(III) and Am(III) from HNO₃ into the organic solvents using N,N,N′,N′‐tetraoctyl‐diglycolamide (TODGA) was investigated in order to study the detailed extraction reaction. The chemical species: 1:2 for metal:TODGA complex is present in polar diluents. On the other hand, the metal complexes need three or more TODGA molecules to remain stable in non‐polar diluents. The HNO₃ concentration dependence on the distribution ratio suggests that HNO₃ participates in the metal extraction. Infrared spectra indicate that the carbonyl oxygen coordinates with Eu(III), and luminescence lifetimes suggest that there are no water molecules in the inner coordination sphere of the extracted Eu‐complex.     

Heterogeneous Catalysis by Heteropoly Compounds of Molybdenum and Tungsten

Heteropolyanions are polymeric oxoanions which are formed by the condensation of more than two different oxoanions [Eq. (1)l. Polyanions consisting of one kind of oxoanion are called isopolyanions [Eq. (2)]. Acidic elements such as Mo, W, V, Nb, and Ta are present as oxoanions in aqueous solutions and polymerize to form polyanions at low pH. Free acids (or acid forms) of these species are called heteropoly and isopoly acids, respectively. Here, the term “heteropoly compounds” is used for heteropoly acids and their salts.     

Burning Characteristics of Ammonium Nitrate‐Based Composite Propellants Supplemented with Fe2O3

Ammonium nitrate (AN)‐based composite propellants have attracted a considerable amount of attention because of the clean burning nature of AN as an oxidizer. However, such propellants have several disadvantages such as poor ignition and a low burning rate. In this study, the burning characteristics of AN‐based propellants supplemented with Fe₂O₃ as a burning catalyst were investigated. The addition of Fe₂O₃ is known to improve the ignitability at low pressure. Fe₂O₃ addition also increases the burning rate, while the pressure exponent generally decreases. The increasing ratio (R) of the burning rate of the AN/Fe₂O₃ propellant to that of the corresponding AN propellant vs. the amount of Fe₂O₃ added (ξ) depends on the burning pressure and AN content. R decreases at threshold value of ξ. The most effective value of ξ for increasing the burning rate was found to be 4 % for the propellant at 80 % AN, and the value generally decreased with decreasing AN content. According to thermal decomposition kinetics, Fe₂O₃ accelerates the reactions of AN and binder decomposition gases in the condensed‐ and/or gas‐phase reaction zones. The burning characteristics of the AN‐based propellant were improved by combining catalysts with differing catalytic mechanisms instead of supplementing the propellant with a single catalyst owing to the multiplicative effect of the former.     

Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

Kinetics of solid acid catalyzed 1-octene reactions with TiO2 in sub- and supercritical water

Acid catalyzed reactions of 1-octene on TiO₂ in sub- and supercritical water were investigated (T = 250-450 °C, P = 11-33 MPa). The main products were 2-octene and 2-octanol. Additionally, other liner C₈ alkenes and liner secondary C₈ alcohols were produced as by-products. Through kinetic analysis, acid catalyzed reactions can divide into the reaction catalyzed by Lewis acidic sites on TiO₂ and the reaction catalyzed by protons produced by the dissociation of water molecules. Each type of the reaction is affected by water density or ionic product of water, respectively, therefore, reaction mechanism changes with temperature and pressure. From the contribution of each reaction type, the temperature dependence of cis/trans ratio of produced 2-octene could also be explained.     

Very slow formation of copper sulfide and cobalt sulfide nanoparticles in montmorillonite

Intercalation of semiconductor nanoparticles, copper sulfide or cobalt sulfide, into montmorillonite was carried out by solid–solid reactions of Cu(II)- or Co(II)-montmorillonite with sodium sulfide at room temperature. The intercalation compounds were characterized by X-ray diffraction, thermal analysis, transmission electron microscopy, Raman, UV–visible and photoluminescence spectroscopy. The photoluminescent copper sulfide and cobalt sulfide nanoparticles in the interlayer spaces formed after the sample storage at room temperature for several months.     

Fabrication of fluorine-terminated diamond-like carbon thin film using a hyperthermal atomic fluorine beam

Surface modification of diamond-like carbon (DLC) film was performed using a hyperthermal atomic fluorine beam on the purpose of production of hydrophobic surface by maintaining the high hardness of DLC film. By the irradiation of atomic fluorine beam of a 1.0 × 10²⁰ atoms/cm², the contact angle of a water drop against the DLC surface increased from 73° to 111°. The formation of CF₃, CF₂ and CF bonding on the modified DLC surface was confirmed from the measurements of X-ray photoelectron spectra and near-edge X-ray absorption fine structure spectra. Irradiation of hyperthermal atomic fluorine beam was concluded to produce insulator fluorine-terminated DLC film, which has high F content on the surface, by the taking of the use of neutral atomic beam as a fluorine source.     

Alignment of a nematic liquid crystal on nano‐grooved material

We demonstrate the alignment characteristics of a nematic liquid crystal on the surface of a nanoimprinted material that is a functionally graduated composite suitable for the alignment of a liquid crystal on a groove surface processed by nanoimprinting lithography. With the electro‐optic characteristics shown in twisted nematic and in‐plane switching modes, the potential liquid crystal applications are examined. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Oxidative Dehydrogenation of Propane with CO2 Over Cr/H[B]MFI Catalysts

Abstract  

Cr/silicalite-1 and Cr/H[B]MFI catalysts were prepared by the impregnation method, and Cr/H[B]MFI were further treated by steaming. The catalysts were employed for the oxidative dehydrogenation of propane to propylene with CO₂ as the oxidant. Cr/H[B]MFI showed significantly higher catalytic activity than Cr/silicalite-1, and steamed Cr/H[B]MFI was superior in the reaction stability to Cr/H[B]MFI. The nature of the supported chromium species have been characterized by a number of physicochemical techniques, such as Raman, UV–vis and NMR. It is concluded that the steaming led to the auto-reduction of some Cr⁶⁺ to Cr³⁺, and resultant Cr³⁺ species might be located near the boron center in the borosilicate framework to counterbalance the negative charge of the framework. The transformation of Cr⁶⁺ species to Cr³⁺ species, facilitated by the steaming process and the presence of boron in the catalyst, is responsible for the enhanced stability of oxidative dehydrogenation of propane to propylene with carbon dioxide as the oxidant.