Importance of nuclear generation in the struggles to reduce CO2 emission at Kansai Electric Power Co.

It has been pointed out in recent years that the potential impacts of global warming has been becoming more and more serious because of the rapid increase of anthropogenic CO₂ emission.

Japan's annual CO₂ emissions (fiscal 1994) amounted to 343 million tons of carbon. Although CO₂ emissions caused by fossil-fuel power generation accounted for 29.4% of total, on a sector basis, those directly from the energy conversion sector accounted for only 7.7%. Most CO₂ emissions (21.7% of total) resulted from electric power use in the industrial, commercial and domestic sectors. Thus, the reduction of CO₂ emissions caused by the use of electricity is a nationwide subject.

Understanding that both supply side and demand side approaches are necessary, Kansai Electric has been deploying “New ERA Strategy” as a comprehensive strategy to seek a potential for CO₂ reduction more broadly and deeply. Among a number of action items are the promotion of nuclear power generation, and improvement of overall energy efficiency, besides such demand side measures as leveling off the peak load.

The effectiveness of action items of the New ERA Strategy was evaluated in terms of CO₂ reduction. As a result, estimated CO₂ reduction related to nuclear power amounted to 88% of the total for fiscal 1995 in comparison with 1990, and that expected in 2000 is 84%. These results reconfirm that nuclear power is always the key to practical CO₂ reduction at present and in the future.

Comparison with candidate technology alternatives revealed that photovoltaic power generation needed 7 times greater rated capacity and 280 times larger area than nuclear power, so it is not realistic as a central power station alternative. The comparison also clarified that if wind power stations were constructed at all feasible sites in the Kansai region, they would not be a viable alternative to a single nuclear unit from CO₂ reduction viewpoint.     

A decentralized control system for stabilizing multimachine power systems

A decentralized control system is studied for stabilizing multimachine power systems. A longitudinal power system with three areas, each having one machine, is considered in this study. A decentralized control design method is proposed, which is based on the optimal regulator theory. First a centralized control system is designed without any consideration on whether state variables are all available or not. Second a pseudo-decentralized control system is designed by omitting control gains corresponding to state variables which give hardly any effects on the power system stability. It is found that only one variable of phase angle of each machine is absolutely necessary for the pseudo-decentralized control system. This leads to an idea based on power system engineering, that is to say, new variables of tieline power flow are introduced in the decentralized control system design to substitute for the phase angle of each machine. Thus a decentralized control system for power system stability can be designed using the new variables of tieline power flow. It is demonstrated from simulation studies that the decentralized control system improves even longitudinal power system stability as well as the centralized control system.     

Development of XLPE insulated DC cable

This paper describes the development of dc XLPE cable. Through a series of material investigations, an XLPE compound containing highly purified special filler was developed. To check the dc insulation performance of the cable insulated with this new material, a prototype cable with 9 mm insulation thickness was manufactured. It was confirmed that the performance of the prototype cable was excellent. Based on the study of the prototype cable, a 250-kV dc cable with 20 mm insulation thickness was designed and manufactured. Through a series of voltage tests, excellent dc insulation performance of the developed cable was verified.     

Colour stability of shisonin,red pigment of a Perilla (Perilla ocimoides L. var.crispa Benth)

The colour stability of shisonin, a red pigment isolated from the leaves of a perilla (Perilla ocimoidesL. var. crispaBenth),was studied in model systems. At pH less than 6, the absorbance of shisonin in solution decreases with increase in pH. The degradation of shisonin in buffers at both pH 3 and 4 followed first-order reaction kinetics. Fructose, sucrose, metal cations Cu⁺⁺ and Fe⁺⁺⁺, hydrogen peroxide, oxygen and daylight affected the degradation rate of shisonin, while glucose, lactose, glycine and leucine had essentially no effect on the degradation rate.     

Coolability study on two-bundle scale flow blockage in the reflood process

A two-bundle scale channel flow blockage in the eight-bundle slab core test facility (SCTF) was examined for core cooling capability study in the reflood phase of a PWR-LOCA. The coplanar blockage with 60% blockage fraction resulted in promotion of quench for the elevation immediately above the blockage in relatively high reflood velocity tests. Conversely, this blockage led to delay of quench in low reflood velocity tests. Peak clad temperature, however, was not affected much by the existence of the blockage. These results are examined in comparison with the results of similar small scale test facilities. This examination revealed that the promotion of quench above the blockage was confined to a shorter length but the quench delay time was slightly longer for a large partial blockage than for a small blockage.     

A far-infrared spectroscopic study of low temperature soft phonon mode in Tris-Sarcosine Calcium Chloride(TSCC)

Temperature dependences of the soft phonon frequency and the damping constant in Tris-Sarcosine Calcium Chloride (TSCC) single crystal have been investigated between 5K and 100K by using a Fourier-transform far-infrared spectrometer. It has been observed that the soft phonon frequency decreases gradually and the damping constant increases as the transition temperature is approached from below The damping constant varies from 7cm^-1 a 90K to less than 0.5cm^-1 at 5K. It has been found that the damping constant is approximately proportional to temperature below about 60K.