Manipulation of micro solid particles and induced flows in water by laser irradiation

Q-switch for pulsing laser beam and Galvano scanner for rapid scanning laser beam were adapted to manipulatemicro solid particles in a water droplet.The trapping of fine particles at micron-sized diameters by a YAG lasersystem,induced flows,and the induced motion of the particles by laser beam irradiations are discussed.Particlerotations are observed by using anisotropic micro objects,and moreover the rotational rate with clockwise direc-tion is 22 r/min.The fragments of a cover glass were mixed in a water droplet,and their size and shape are un-even.The rotation of that non-spheres without scanning by the Galvano scanner is also observed in water.     

Numerical modeling of CdS/CdTe and CdS/CdTe/ZnTe solar cells as a function of CdTe thickness

CdTe-based solar cells have long been of interest for terrestrial usage because of their high potential conversion efficiency (in the range of 18–24%) with low-cost manufacturability and concern over environmental effects. In order to conserve material and address environmental pollution concerns as well as to reduce carrier recombination loss throughout the absorber layer, efforts have been carried out to decrease the thickness of the CdTe absorption layer to 1 μm. As a result, to date, the experimental part of this study has realized cell efficiencies of 15.3% and 11.5% with 7 and 1.2-μm-thick CdTe layers, grown by close-spaced sublimation (CSS) [N. Amin, T. Isaka, T. Okamoto, A. Yamada, M. Konagai, Jpn. J. Appl. Phys. 38 (8) (1999) 4666; N. Amin, T. Isaka, A. Yamada, M. Konagai, Sol. Energy Matter. Sol. Cells 67 (2001) 195]. Since some problems remain with such thin 1 μm CdTe layers, possible methods to realize higher efficiency have been investigated using novel solar cell structures, with the help of numerical analyses tools. In the theory part of this study, numerical analysis with a 1-D simulation program named NSSP (Numerical Solar Cell Simulation Program) has been used to simulate these structures. We investigated the viability of CdTe thickness reduction to 1 μm together with the insertion of higher band-gap materials (i.e., ZnTe) at the back contacts to reduce carrier recombination loss there. The study shows potential results of the thickness reduction of CdTe absorption layer for a conventional CdS/CdTe/Cu-doped C structure with around 16% efficiency for cells below 3  μm CdTe. Decreases were found in spectral response that suggest from minority carrier recombination loss at the back contact interface. A higher band-gap material like ZnTe has been inserted to produce a back surface field (BSF) to inhibit the minority carrier loss at the back contact. An increase in the efficiency to about 20% has been found for a 1 μm-thin CdTe cell, which can be attributed to the increased BSF effect at the back contact of thinner CdTe-based cells.     

Molecular Design and Synthesis of a Novel Substrate for Assaying Lysozyme Activity

A novel substrate {Galβ1,4GlcNAcβ1,4GlcNAc-β-pNP [Gal(GlcNAc)₂-β-pNP]} for assaying lysozyme activity has been designed using docking simulations and enzymatic synthesis via β-1,4-galactosyltransferase-mediated transglycosylation from UDP-Gal as the donor to (GlcNAc)₂-β-pNP as the acceptor. Hydrolysis of the synthesized Gal(GlcNAc)₂-β-pNP and related compounds using hen egg-white lysozyme (HEWL) demonstrated that the substrate was specifically cleaved to Gal(GlcNAc)₂ and p-nitrophenol (pNP). A combination of kinetic studies and docking simulation was further conducted to elucidate the mode of substrate binding. The results demonstrate that Gal(GlcNAc)₂-β-pNP selectively binds to a subsite of lysozyme to liberate the Gal(GlcNAc)₂ and pNP products. The work therefore describes a new colorimetric method for quantifying lysozyme on the basis of the determination of pNP liberated from the substrate.     

Coordinate-Based Evaluation of Two Dimensional Artefact Calibration Value as the Reference Standards for Coordinate Measuring Machines

Two dimensional standards are important materials which are used in the calibration and the verification of coordinate measuring machines. In several countries, the national metrology institutes or accredit laboratories provide the calibration services of the two dimensional standards such as ball plates, hole plates and grid plates. The metrological equivalence of the measurement standards among the calibration providers is validated through the key comparison program. In the previous key comparison for a ball plate and a hole plate, the equivalences among the participants’ calibration results were verified on the distances between the No. 1 ball/hole (i.e., the origins of the workpiece coordinates) and other balls/holes on the plates respectively. The essential measurands of the two dimensional standards are the coordinates of the feature points, however, the measurement equivalences on them have not been verified. In this study, the authors propose the coordinates-based evaluation of the reference values and their uncertainty in two dimensional standard calibration comparison.     

Effective Characterization of DNA Ligation Kinetics by High-Resolution Melting Analysis

High-resolution melting (HRM) analysis has been improved and applied for the first time to quantitative analysis of enzymatic reactions. By using the relative ratios of peak intensities of substrates and products, the quantitativity of conventional HRM analysis has been improved to allow detailed kinetic analysis. As an example, the ligation of sticky ends through the action of T4 DNA ligase has been kinetically analyzed, with comprehensive data on substrate specificity and other properties having been obtained. For the first time, the kinetic parameters (k_obs and apparent K_m) of sticky-end ligation were obtained for both fully matched and mismatched sticky ends. The effect of ATP concentration on sticky-end ligation was also investigated. The improved HRM method should also be applicable to versatile DNA-transforming enzymes, because the only requirement is that the products have T_m values different enough from the substrates.     

Full Eulerian deformable solid-fluid interaction scheme based on building-cube method for large-scale parallel computing

We propose a full Eulerian incompressible solid-fluid interaction scheme capable of achieving high parallel efficiency and easily generating meshes for complex solid geometries. While good scalability of a full Eulerian solid-fluid interaction formulation has been reported by Sugiyama et al, their analysis was carried out using uniform Cartesian mesh and an artificial compressibility method. Typically, it is more challenging to achieve good scalability for hierarchical Cartesian meshes and a fully incompressible formulation. In addition, the conventional full Eulerian methods require a large computational cost to resolve complex solid geometries due to the usage of uniform Cartesian meshes. In an attempt to overcome the aforementioned issues, we employ the building-cube method, where the computational domain is divided into cubic regions called cubes. Each cube is divided at equal intervals, the same number of cubes is assigned to each core, and the spatial loop processing is executed for each cube. The numerical method is verified by computing five numerical examples. In the weak scaling test, the parallel efficiency at 32768 cores with 32 cores as a reference is 93.6%. In the strong scaling test, the parallel efficiency at 32768 cores with 128 cores as a reference is 70.2%.     

‘Lipase and protease production of dairy Penicillium sp. on milk‐protein‐based solid substrates’

The lipolytic and proteolytic activity of Penicillium camemberti PC TT033 and Penicillium roqueforti PR G3, cultured on the whey solids or simulated cheese media, were compared under several pH reaction conditions. Lipolytic activity was higher when both strains had been cultured on the whey medium than on the simulated cheese medium, whereas proteolytic activity was less influenced by the culture medium. The relationship between the reaction pH and these enzyme activities was dependent on the culture medium, which suggested that the expression level and balance of isozyme rely on the culture substrate.     

Potent antioxidative activity of non‐polyphenolic fraction of green tea (Camellia sinensis) – association with pheophytins a and b

The antioxidative activity of green tea‐derived polyphenols known as catechins has been extensively studied. However, the antioxidative activity of the non‐polyphenolic fraction of green tea has been poorly elucidated and is the subject of the present study. The non‐polyphenolic fraction of green tea showed a significant dose‐dependent suppressive effect against the autooxidation of linoleic acid. The chlorophyll‐related compounds pheophytins a and b showed similar antioxidative activities in the same assay, much higher than those of α‐tocopherol and the green tea catechin (−)‐epigallocatechin‐3‐gallate (EGCG). The non‐polyphenolic fraction of green tea and pheophytins a and b exhibited suppressive activities against superoxide anion (${\bf O}_{2}ˆ{‐}$ ) generation in mouse macrophages induced by 12‐O‐tetradecanoylphorbol‐13‐acetate, showing higher activities than that of EGCG. These results suggest that the non‐polyphenolic fraction of green tea leaves has potent antioxidative activity and that this activity is associated with pheophytins a and b. © 2000 Society of Chemical Industry     

Fusion and molecular aspects of liposomal nanocarriers incorporated with isoprenoids

The present study was conducted to investigate whether typical isoprenyl compounds (TICs) can control liposomal fusion reactions through changes in the physical properties of membranes. The fusion capabilities of TIC-incorporated liposomes were characterized by measuring the 13C spin-lattice relaxation times (13CT1) and the gel permeation chromatogram (GPC) patterns. The 13CT1 relaxivities of some of these TIC-liposomes were remarkably enhanced at 27 degrees C. The highest 13CT1 value obtained was for the beta-carotene-liposome, which ruptured, and was attributed to the highest membrane fusion reactivity. The other TIC-liposomes incorporated with alpha-tocopherol, canthaxanthin, or coenzyme Q10 also induced significant fusion and did not rupture in comparison with the beta-carotene-liposome. These results show that the incorporations of TICs into lipid bilayers are useful to control liposomal nanocarriers for suitable membrane packing and advantageous phase separation, which could affect membrane-related processes.     

12300 ps/nm, 2.4 Gb/s nonregenerative optical fiber transmissionexperiment and effect of transmitter phase noise

A nonregenerative optical transmission experiment with a chromatic dispersion of more than 10000 ps/nm is reported. Externally intensity-modulated 2.4 Gb/s optical signals were transmitted over 710 km of nondispersion-shifted optical fiber using ten Er-doped fiber amplifiers with a total net optical gain of 125 dB. Although the total chromatic dispersion amounted to 12300 ps/nm, the power penalty observed was as small as 0.5 dB, and an error floor was not observed. The effect of transmitter phase noise associated with fiber chromatic dispersion was experimentally investigated