电流变流体的研究进展

电流变流体是近年来逐渐受人们重视的一种功能材料，本文介绍其国内、外发展过程及研究现状。     

Development of a physics analysis procedure for the prismatic very high temperature gas-cooled reactors

A new physics analysis procedure has been developed for a prismatic very high temperature gas-cooled reactor based on a conventional two-step procedure for the PWR physics analysis. The HELIOS and MASTER codes were employed to generate the coarse group cross sections through a transport lattice calculation, and to perform the 3-dimensional core physics analysis by a nodal diffusion calculation, respectively. Physics analysis of the prismatic VHTRs involves particular modeling issues such as a double heterogeneity of the coated fuel particles, a neutron streaming in the coolant channels, a strong core-reflector interaction, and large spectrum shifts due to changes of the surrounding environment and state parameters. Double heterogeneity effect was considered by using a recently developed reactivity-equivalent physical transformation method. Neutron streaming effect was quantified through 3-dimensional Monte Carlo transport calculations by using the MCNP code. Strong core-reflector interaction could be handled by applying an equivalence theory to the generation of the reflector cross sections. The effects of a spectrum shift could be covered by optimizing the coarse energy group structure. A two-step analysis procedure was established for the prismatic VHTR physics analysis by combining all the methodologies described above. The applicability of our code system was tested against core benchmark problems. The results of these benchmark tests show that our code system is very accurate and practical for a prismatic VHTR physics analysis.     

Preparations of nanosized TiO2 in reverse microemulsion and their photocatalytic activity

Nanosized titania sol has been produced by the controlled hydrolysis of titanium tetraisopropoxide (TTIP) in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles. The physical properties, such as surface area, crystallite size and crystallinity according to R and W₀ ratio, have been investigated by TEM, XRD, BET, FT–IR, TGA and DTA. In addition, the photocatalytic decomposition of p-nitrophenol has been studied by using a batch reactor in the presence of UV light in order to compare the photocatalytic activity of prepared nanosized titania. It is shown that the anatase structure appears in the 300–600 °C calcination temperature range and the transformation of anatase into rutile starts above 700 °C. The crystallite size increases with increasing R and W₀ ratio but W₀ ratio shows a stronger effect on the crystallite size than R ratio. In the photocatalytic decomposition of p-nitrophenol, the photocatalytic activity is mainly determined by the crystallinity of titania. In addition, the titania calcined at 500 °C shows the highest activity on the photocatalytic decomposition of p-nitrophenol() and the pure anatase structure.     

溶胶-凝胶法制备(Sr,Pb)TiO3纳米晶粉及表征

采用溶胶－凝胶法成功地合成了（Sr,Pb)TiO3纳米晶粉，并利用FTIR技术对凝胶的形成过程及350℃，1．5h煅烧获得的粉体材料进行了表征。实验以TG－DSC分析作为拟定煅烧温度的依据，以XRD作为煅烧产物的分析手段，最佳煅烧温度为600℃，所合成的（Sr,Pb)TiO3纳米晶粉的平均晶粒尺寸约为21nm，属钙钛矿型立方顺电相结构。     

利用分形几何确定多孔介质的孔尺寸分布

提出了利用分形几何确定多孔介质孔尺寸分布的方法。考虑多孔介质中孔间的屏蔽，采用此方法得到的孔尺寸分布范围比采用平行孔模型宽，分别采用本方法和平行孔模型测定γ－Al2O3催化剂的孔尺寸分布，构造简单立方体三维网络模型模拟压汞过程，并将模拟曲线与γ－Al2O3压汞实验曲线比较，结果表明，采用本方法所得孔尺雨分布优于平行孔模型所得孔尺寸分布。     

Long-term evaluation of the ventricular defibrillation energy requirement

INTRODUCTION: Defibrillation energy requirements in patients with nonthoracotomy defibrillators may increase within several months after implantation. However, the stability of the defibrillation energy requirement beyond 1 year has not been reported. The purpose of this study was to characterize the defibrillation energy requirement during 2 years of clinical follow-up. METHODS AND RESULTS: Thirty-one consecutive patients with a biphasic nonthoracotomy defibrillation system underwent defibrillation energy requirement testing using a step-down technique (20, 15, 12, 10, 8, 6, 5, 4, 3, 2, and 1 J) during defibrillator implantation, and then 24 hours, 2 months, 1 year, and 2 years after implantation. The mean defibrillation energy requirement during these evaluations was 10.9+/-5.5 J, 12.3+/-7.3 J, 11.7+/-5.6 J, 10.2+/-4.0 J, and 11.7+/-7.4 J, respectively (P = 0.4). The defibrillation energy requirement was noted to have increased by 10 J or more after 2 years of follow-up in five patients. In one of these patients, the defibrillation energy requirement was no longer associated with an adequate safety margin, necessitating revision of the defibrillation system. There were no identifiable clinical characteristics that distinguished patients who did and did not develop a 10-J or more increase in the defibrillation energy requirement. CONCLUSION: The mean defibrillation energy requirement does not change significantly after 2 years of biphasic nonthoracotomy defibrillator system implantation. However, approximately 15% of patients develop a 10-J or greater elevation in the defibrillation energy requirement, and 3% may require a defibrillation system revision. Therefore, a yearly evaluation of the defibrillation energy requirement may be appropriate.     

汽油机爆震强度的分析

分析了汽油机缸内气体爆震燃烧压力的频率特性并推导了爆震压力共振频率计算公式。研究表明：在爆震工况下，缸内压力在高频域中有几个共振峰，峰的大小表明了汽油机爆震强度。汽油机的表面振动在这些共振频率峰处也出现相应振动峰。表面振动峰与缸力压内峰值近似成正比。汽油机表面振动峰值可作为爆震强度的评价指标，该结论在ＣＡ１１０２汽油机上得到了证实。     

钨带灯的稳定性判据试验

我们通过对国产ＢＷ—１４００型真空钨带灯的稳定性判据进行研究，发现通过钨带灯的电流达到稳定的时间很短（小于５分钟），而钨带灯的灯电阻需要经过２０分钟后才能达到稳定，因此，用电流稳定性作为钨带灯的热平衡判据是不够的，更可靠的判据还应看灯电阻是否达到平衡。     

Temperature-regulated expression of the tac/lacl system for overproduction of a fungal xylanase in Escherichia coli

Temperature-regulated expression of recombinant proteins in the tac promoter (Ptac) system was investigated. Expression levels of fungal xylanase and cellulase from N. patriciarum in E. coli strains containing the natural lacI gene under the control of the Ptac markedly increased with increasing cultivation temperature in the absence of a chemical inducer. The specific activities (units per milligram protein of crude enzyme) of the fungal xylanase and cellulase produced from recombinant E. coli strain pop2136 grown at 42 degrees C were about 4.5 times higher than those of the cells grown at 23 degrees C and were even slightly higher when compared with cells grown in the presence of the inducer isopropyl beta-D-thiogalactopyranoside. The xylanase expression level in the temperature-regulated Ptac system was about 35% of total cellular protein. However, this system can not be applied to E. coli strains containing lacIq, which confers over production of the lac repressor, for high-level expression of recombinant proteins. In comparison with the lambda PL system, the Ptac-based xylanase plasmid in E. coli pop2136 gave a considerably higher specific activity of the xylanase than did the best lambda PL-based construct using the same thermal induction procedure. The high-level expression of the xylanase using the temperature-regulated Ptac system was also obtained in 10-litre fermentation studies using a fed-batch process. These results unambiguously demonstrated that the temperature-modulated Ptac system can be used for overproduction of some non-toxic recombinant proteins.     

天津市正常人全血和血清微量元素含量分析

人体内微量元素含量平衡与否与人体健康状态有着密切关系已为大量实践所证实。人体血液中微量元素的正常值测定是研究人体健康与微量元素关系的一项基础性工作,本文提供了天津市正常人全血及血清中几种微量元素含量的数据。