Preparation and characterization of sulfonated block‐graft copolyimide/sulfonated polybenzimidazole blend membranes for fuel cell application

Polymer electrolyte blend membranes composed of sulfonated block‐graft polyimide (S‐bg‐PI) and sulfonated polybenzimidazole (sPBI) were prepared and characterized. The proton conductivity and oxygen permeability coefficient of the novel blend membrane S‐bg‐PI/sPBI (7 wt%) were 0.38 S cm^?1 at 90 °C and 98% relative humidity and 7.2 × 10^?13 cm³(STP) cm (cm² s cmHg)^?1 at 35 °C and 76 cmHg, respectively, while those of Nafion^® were 0.15 S cm^?1 and 1.1 × 10^?10 cm³(STP) cm (cm² s cmHg)^?1 under the same conditions. The apparent (proton/oxygen transport) selectivity calculated from the proton conductivity and the oxygen permeability coefficient in the S‐bg‐PI/sPBI (7 wt%) membrane was 300 times larger than that determined in the Nafion membrane. Besides, the excellent gas barrier properties based on an acid ? base interaction in the blend membranes are expected to suppress the generation of hydrogen peroxide and reactive oxygen species, which will degrade fuel cells during operation. The excellent proton conductivity and gas barrier properties of the novel membranes promise their application for future fuel cell membranes. © 2015 Society of Chemical Industry     

Effects of CuO Addition on Electrical Properties of 0.6BiFeO3–0.4(Bi0.5K0.5)TiO3 Lead‐Free Piezoelectric Ceramics

0.6BiFeO₃–0.4(Bi_0.5K_0.5)TiO₃ (0.6BF–0.4BKT) ceramic samples with 0.0–4.0 mol% CuO were prepared by the solid‐state reaction. The CuO addition aided the densification of the samples and slightly increased the lattice constant. The relaxor‐like defuse dielectric peak of 0.6BF–0.4BKT became sharper with increasing the CuO content. Polarization–electric field curve of the undoped 0.6BF–0.4BKT was a pinched loop in the as‐sintered state, while that was a square hysteresis with a large remanent polarization of 48 μC/cm² after the thermal quenching, demonstrating a strong domain wall pinning due to defect dipoles. We found that the CuO addition up to 2.0 mol% facilitates the polarization switching in the as‐sintered samples to increase the remanent polarization and the piezoelectric d₃₃ coefficient. The results of the structural and electrical investigations suggested that the copper ion acts as a donor in 0.6BF–0.4BKT by compensating the potassium vacancy created by the evaporation of K₂O during the calcination and sintering processes.     

Relationship between degree of polymerization and optical and thermal properties of fluorene in polycarbonate polymers

The influences of average degree of polymerization (D_p) and terminal group on thermal and optical properties of high refractive indexed transparent polymers were investigated. In this study, 9,9‐bis[4–(2‐hydroxyethoxy) phenyl] fluorene (BPEF) homo polymer was selected because it has been used as a representative monomer in high refractive index polymers as well as its unique property. BPEF has stable amorphous phase and reacts like a polymer. Its unique reaction allows continuous investigation from monomer to polymer. For hydroxyl‐terminated polymer, the refractive index (n_d) decreased with increasing D_p. On the other hand, for a phenolic‐terminated group, n_d increased with increasing D_p, and both converged to same value in high D_p region. As for glass transition temperatures (T_g), both terminal group series were increased as D_p increased. Though T_g of hydroxyl‐terminated polymer was higher than that of phenolic‐terminated polymer in the low D_p region, both converged to the same value and the inverse number of T_g had linear correlation against the weight percentage of carbonyl groups (CO), which was calculated by D_p. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45042.     

Incorporation of Dust Particles into a Growing Film During Silicon Dioxide Deposition from a TEOS/O2 Plasma

The effects of gas flow rate on particle formation and film deposition during the preparation of silica thin film using a TEOS/O₂ plasma were investigated. Particle formation and growth are suppressed with increasing gas flow rates. The film deposition rate increases with increasing gas flow rate, reaches a maximum value, and eventually decreases again. However, the uniformity of the film tends to degrade at high gas flow rates. At a high gas flow rate, some particles trapped in the sheath near the grounded electrode pass through the sheath to reach the substrate and are then embedded in the growing film. A self-consistent sheath model combined with particle force balance based on charge fluctuation was developed to explain these experimental findings qualitatively. The model reveals that charge fluctuation is a key factor for the particle to overcome the potential barrier of the negatively charged particles to pass through the sheath, eventually reaching the substrate. The model further shows that the probability of a particle being deposited on the substrate is higher for increased gas flow rates, which correctly predicts the experimentally observed trend.     

Unipolar Charging of Nanosized Aerosol Particles Using Soft X-ray Photoionization

A unipolar charging device based on a soft X-ray (<9.5 keV) photoionization was developed to investigate the charging efficiency of aerosol nanoparticles. Unipolar charging using a 241 Am charger was also evaluated as a comparison with the characteristics obtained by X-ray charging. The production rate and the concentration of ions generated by the X-ray and 241 Am unipolar chargers were estimated from ion current measurements. Theoretical calculations by the unipolar diffusion charging theory were also carried out and the calculated data were compared with the experimental results. For acquiring a high number of standard nanoparticles, the classification of monodisperse nanoparticles from polydisperse aerosol particles using the X-ray unipolar charger and a differential mobility analyzer (DMA) was also evaluated. The ion production rate of the X-ray unipolar charger was at least 5.5 times higher than that of the 241 Am unipolar charger and the ion concentration was about three times higher. Therefore, the X-ray unipolar charger showed a higher capability for charging aerosol particles of 10-40 nm size in diameter than the 241 Am charger. The charging state of particles produced by the X-ray unipolar charger was in good agreement with theoretical calculations. The X-ray unipolar charger developed herein has potential for use in charging a high number concentration of nanoparticles for use in nanotechnology investigations.     

Stereoselective partitioning of organic substrates by thermoresponsive polymers in aqueous phases

Partitioning of organic substrates by thermoresponsive polymer having N‐acryloylaminoalcohol moieties in aqueous phase has been studied. Thermoresponsive polymers, such as poly(N‐isopropylacrylamide) (PNIPAAm) and poly(NIPAAm‐co‐N‐acryloyl‐(±)‐alaninol) (poly(NIPAAm‐co‐HIPAAm)), were found to concentrate several organic substrates into the hydrophobic field generated during their phase transition. The amount of the substrates recoverd from the polymer phase mainly depended on the hydrophobicity of the substrates. Aqueous solutions of PNIPAAm (lower critical solution temperature, LCST = 33°C) and poly(NIPAAm‐co‐HIPAAm) (LSCT = 41°C) containing 1‐phenylethanol showed LCSTs at 22°C and 33°C, respectively. The changes of LCSTs indicate that specific interactions such as hydrogen bonding between the side chain functionalities of the polymers and the substrates influence the phase transition behavior. Moreover, new optically active polymers having chiral aminoalcohol moieties have been synthesized by copolymerizations of NIPAAm with N‐acryloylaminoalcohols such as N‐acryloyl‐(S)‐alaninol and N‐acryloyl‐(S)‐prolinol. The (R)/(S) ratio of 1‐phenylethanol recovered from poly(NIPAAm‐co‐N‐acryloyl‐(S)‐alaninol) and poly(NIPAAm‐co‐N‐acryloyl‐(S)‐prolinol) were determined to be 75/25 and 68/32, respectively. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3458–3464, 2013     

The content of tocopherols and oxidative quality of oils prepared from sunflower (Helianthus annuus L.) seeds roasted in a microwave oven

Sunflower seeds ((Helianthus annuus were roasted for 6, 12, 20 or 30 min at a frequency of 2450 MHz using a domestic microwave oven. After the kernels were separated from the sunflower seeds, the quality characteristics and the compositions of the oils were investigated in relation to their tocopherol distributions, and they were further evaluated as compared with an unroasted oil sample. Only minor increases (p < 0.05) in chemical and physical changes of the oils, such as the carbonyl value, the p‐anisidine value and the color development, occurred at a prolonged roasting period. Significant decrease (p < 0.05) was observed in the amounts of phospholipids in the oils after microwave roasting. Nevertheless, compared to the original level, more than 92 wt‐% tocopherols still remained after 30 min of roasting. With a few exceptions, these results indicate that the exposure of sunflower seeds to microwaves for 12 min caused no significant (p < 0.05) loss or change in the content of tocopherols and polyunsaturated fatty acids in the kernels.     

Properties and estimation of mullite thermal insulators prepared by gelation–freezing with alumina nanofibers

Thermal insulators were fabricated by freezing gelatin gels containing calcined kaolinite with alumina nanofibers, followed by sintering. The resultant porosity could be varied from 81.0% to 89.8% by solid loadings in the initial slurry. The relationship among porosity, microstructure, compressive strength, and thermal conductivity was examined. The compressive strength and thermal conductivities of the insulators prepared with initial solid loadings from 3 to 6 vol% ranged from 11.6 to 56.7 MPa and from .25 to .46 W/mK, respectively. Those properties were also estimated by simulation using modeling of overall pore morphology, resulting in good agreement.     

New Approach for Macro Porous RB‐SiC Derived from SiC/Novolac‐type Phenolic Composite

A novel fabrication route to make macroporous silicon carbide (SiC) has been proposed in this study. The route is composed of the following two steps: the fabrication of porous α‐SiC/novolac‐type phenolic composite using hexamethylenetetramine (HMT) as a curing/blowing agent for the novolac monomer and a conventional reaction‐bonded (RB) sintering of the composite. The α‐SiC/novolac‐type phenolic composite was carbonized at 800°C for 2 h in N₂ gas and then reacted with the molten silicon at 1450°C for 30 min under vacuum, resulting in the macroporous RB‐SiC with an open porosity of 48% and relatively large pore size of ~110 μm. The compressive strength of the macroporous RB‐SiC was 113 MPa, which is relatively high compared to those reported for macroporous SiC of equivalent porosities and pore sizes.     

Imaging Secondary-Ion Mass Spectroscopy Observation of the Scavenging of Siliceous Film from 8-mol%-Yttria-Stabilized Zirconia by the Addition of Alumina

The scavenging of a resistive siliceous phase via the addition of Al₂O₃ was studied, using imaging secondary-ion mass spectroscopy (SIMS), given the improved grain-boundary conductivity in 8-mol%-yttria-stabilized zirconia (8YSZ). The grain-boundary resistivity in 8YSZ decreased noticeably with the addition of 1 mol% of Al₂O₃. Strong SiO₂ segregation at the grain boundaries was observed in a SIMS map of pure 8YSZ that contained 120 ppm of SiO₂ (by weight). The addition of 1 mol% of Al₂O₃ caused the SiO₂ to gather around the Al₂O₃ particles. The present observations provided direct and visual evidence of SiO₂ segregation at the grain boundaries (which had a deleterious effect on grain-boundary conductivity) and the scavenging of SiO₂ via Al₂O₃ addition.