Early stage of the crystallization in amorphous Fe–Si layers: Formation and growth of metastable α-FeSi2

Crystallization processes of amorphous Fe–Si layers have been investigated using transmission electron microscopy (TEM). Si(1 1 1) substrates were irradiated with 120 keV Fe ions at ?150 °C to a fluence of 1.0 × 10¹⁷ cm². An Fe-rich amorphous layer embedded in an amorphous Si was formed in the as-irradiated sample. Plan-view TEM observations revealed that a part of the amorphous Fe–Si layer crystallized to the metastable α-FeSi₂ after thermal annealing at 350 °C for 8 h. The lattice parameter of c-axis decreased with thermal annealing. It was considered that the change in the lattice parameter originates from the decrease of the Fe occupancy at (0, 0, 1/2) and its equivalent positions in the unit cell of the metastable α-FeSi₂.     

Effect of Vacancy Distribution on the Thermal Conductivity of Ga<Subscript>2</Subscript>Te<Subscript>3</Subscript> and Ga<Subscript>2</Subscript>Se<Subscript>3</Subscript>

Our group has focused attention on Ga₂Te₃ as a natural nanostructured thermoelectric material. Ga₂Te₃ has basically a zincblende structure, but one-third of the Ga sites are structural vacancies due to the valence mismatch between Ga and Te. It has been confirmed that (1) vacancies in Ga₂Te₃ exist as two-dimensional (2D) vacancy planes, and (2) Ga₂Te₃ exhibits an unexpectedly low thermal conductivity (κ), most likely due to highly effective phonon scattering by the 2D vacancy planes. However, the effect of the size and periodicity of the 2D vacancy planes on κ has been unclear. In addition, it has also been unclear whether only the 2D vacancy planes reduce κ or if point-type vacancies can also reduce κ. In the present study, we tried to prepare Ga₂Te₃ and Ga₂Se₃ with various vacancy distributions by controlling annealing conditions. The atomic structures of the samples were characterized by means of transmission electron microscopy, and κ was evaluated from the thermal diffusivity measured by the laser flash method. The effects of vacancy distributions on κ of Ga₂Te₃ and Ga₂Se₃ are discussed.     

Cathode properties of metal trifluorides in Li and Na secondary batteries

Fluorine compounds have high discharge voltage due to its highly ionic metal-ligand bonds. In them, perovskite-type metal trifluorides with corner sharing matrix have large bottlenecks of diffusion pathways for intercalants. Iron trifluoride composites (FeF₃-C) prepared by planetary ball milling with carbon showed reversible charge/discharge behavior not only for Li, but also for Na anodes. X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy were applied to characterize the electrochemical properties of FeF₃ vs. Li and Na anodes. The cathode performances of the other commercially available transition metal trifluorides such as MF₃ (M = Ti, V, Mn, Co) have been also investigated.     

Effect of Cation Doping on the Superplastic Flow in Yttria-Stabilized Tetragonal Zirconia Polycrystals

The superplastic characteristics of various cation-doped yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) were examined. For 1 mol% cation doping the true stress of Y-TZP is very dependent on the ionic radii of the doped cations; for instance, smaller cation radii give rise to lower true stress when compared with the other compositions for the same grain size, strain rate, and testing temperature. The altered true stress level must be due to the change in diffusivity of the accommodation process for grain boundary sliding caused by the addition of cations in ZrO₂. The strain to failure of the doped zirconia is affected by both ionic radius and valence of the dopant cations.     

In-Flight Particle Measurement of Alkali-Free Glass Raw Materials in 12-Phase AC Arc Plasma

In-flight particle measurements of the surface temperature and velocity are important for understanding of melting behavior of glass particles during in-flight melting by multi-phase AC arc plasma. However, the use of optical pyrometry for particle surface temperature has inevitable uncertainties due to non-thermal emissions signals from the plasma plume. This work presents spectroscopic measurements of the non-thermal signals which were found to be caused mainly by the plasma emissions scattered by the particles and the radiation emitted by vapor. After that, the accuracy of thermal radiation measurement was estimated and surface temperature of in-flight glass particle was corrected.     

Synergistic effect of Pt or Pd and perovskite oxide for water gas shift reaction

The water gas shift (WGS) reaction over Pt and Pd catalysts supported on various perovskite oxides has been investigated at 573 K without catalyst pretreatment. The Pt and Pd catalysts on LaCoO₃ support showed high catalytic activity. Interaction between Pt or Pd and the support is considered to promote the WGS reaction: Pt/LaCoO₃ had high initial activity but deactivated immediately; Pd/LaCoO₃ was less active than Pt/LaCoO₃, but had superior stability. Catalysts were characterized using XRD, STEM, XPS, and H₂-temperature programmed reduction (TPR). Results of this study showed that reduction of the support decreased the CO conversion on Pt/LaCoO₃. On the other hand, Pd/LaCoO₃ showed stable activity for the WGS reaction. Therefore, Pd was added to Pt/LaCoO₃ for stabilizing the catalyst activity, and 0.5 wt.% Pd/1 wt.% Pt/LaCoO₃ catalyst showed higher activity and stability.     

Biochemical characterization of horA-independent hop resistance mechanism in Lactobacillus brevis

We isolated a strain from hop-resistant Lactobacillus hrevis ABBC45, which had lost a plasmid (pRH45) harboring a putative hop resistance gene, horA. The hop resistance level of this horA-deficient strain, named ABBC45(C), was initially low but gradually induced by repeated growth in media containing progressively increasing levels of hop compounds. Although the hop resistance level was substantially lower than that of the hop-adapted wild type strain, hop-adapted ABBC45(C) (ABBC45(CR)) was still capable of growing in beer, suggesting ABBC45 possesses at least two hop resistance mechanisms. Hop resistance acquired by ABBC45(CR) gradually diminished to the pre-adapted level, when the strain was grown repeatedly in the absence of hop compounds. ABBC45(CR) was found to be cross-resistant to several structurally unrelated drugs, including ethidium bromide, daunomycin and nisin. In addition, ABBC45(CR) was shown to extrude ethidium in an energy-dependent manner, while ABBC45(C) did not show such activity. This indicates that the efflux pump was induced by adaptation to hop compounds. The efflux activity of ethidium was reduced by the addition of hop compounds, suggesting hop compounds are also the substrate of the efflux pump. It was also shown that the efflux activity was completely dissipated with the abolition of proton motive force (PMF). These results, taken together, suggest the hop resistance mechanism of ABBC45(C) is mediated by PMF-dependent multidrug efflux pump.     

Successive changes in community structure of an ethylbenzene-degrading sulfate-reducing consortium

The microbial community structure and successive changes in a mesophilic ethylbenzene-degrading sulfate-reducing consortium were for the first time clarified by the denaturing gradient gel electrophoresis (DGGE) analysis of the PCR amplified 16S rRNA gene fragments. At least ten bands on the DGGE gel were detected in the stationary phase. Phylogenetic analysis of the DGGE bands revealed that the consortium consisted of different eubacterial phyla including the delta subgroup of Proteobacteria, the order Sphingobacteriales, the order Spirochaetales, and the unknown bacterium. The most abundant band C was closely related to strain mXyS1, an m-xylene-degrading sulfate-reducing bacterium (SRB), and occurred as a sole band on DGGE gels in the logarithmic growth phase that 40% ethylbenzene was consumed accompanied by sulfide production. During further prolonged incubation, the dominancy of band C did not change. These results suggest that SRB corresponds to the most abundant band C and contributes mainly to the degradation of ethylbenzene coupled with sulfate reduction.     

Stabilization by harmonic intensities for the output signal in heterodyne detection

We experimentally demonstrated that the technique to stabilize the output signal by harmonic intensities is useful in heterodyne detection with an incoherent light source such as a halogen lamp. The relation between the relative standard deviation of an output signal and the fluctuation of the light intensity is analyzed and simulated. Using the fundamental to sixth harmonics increases the stabilities of output signal approximately 3 times, and subtracting the relative standard deviation of the intensity of light source enhances the stabilities 49 times. The fluctuating phase that is due to the fluctuating frequency and temperature and its power spectrum density for an interferometer is also calculated with the Allan variance.