Continuous reactor system of monosized colloidal particles

A reactor system, which continuously hydrolysed the metal alkoxide in an alcohol solution, was designed using an electromagnetic stirrer and an ageing tube. Several monosized colloidal particles were produced by this reactor system, which had high reproducibility and reliability for long-term production. The relation between powder characteristics and experimental parameters such as reagent concentration, mixing rate, ageing time, temperature, was investigated. These parameters had an effect on the particle size, size distribution, morphology and state of agglomeration. It is possible to control the particle size to between 0.1 and 1.0 μm by varying the experimental conditions. A narrower size distribution of powders was obtained by using an electromagnetic stirrer with greater flow rate. Physical and chemical properties of monosized colloidal particles obtained by this reactor were comparable to those of monosized colloidal particles obtained by the batch process.     

Velocity and turbulence measurements in a cylindrical bath subject to centric bottom gas injection

Laser Doppler velocimeter (LDV) measurements were made to clarify the fluid flow behavior in a bath subject to centric bottom gas injection. Correlations of the axial mean velocity and turbulence components in the gas-liquid two-phase flow region,i.e., in the bubbling jet region, were proposed as functions of the inner diameter of nozzle, gas flow rate, and densities of gas and liquid. Measured values of the flow rate, momentum, and kinetic energy of water rising upward were approximated satisfactorily by these empirical correlations. In addition, the Reynolds shear stress was calculated and compared with measured values. Formerly Graduate Student, Osaka University,     

Influences of electroosmotic flows in nanopillar chips on DNA separation: Experimental results and numerical simulations

The various potential factors affecting the performance of nanopillar chips on DNA separation were investigated from the viewpoints of both numerical calculations and actual experiments. To yield higher performance and replace the conventional DNA separation techniques such as microchip electrophoresis, the phenomenon specific to the nanopillar chips should be deeply understood. In this paper, although various factors affecting the performance of the nanopillar chips are considered, we focused on the effect of electroosmotic flow, which is particularly noticeable in quartz-made nanopillar chips. High-resolution separation of DNA was realized when an electroosmotic flow was suppressed by simply using a higher concentration of buffer, but DNA separation failed in the presence of an electroosmotic flow. It was confirmed from the numerical simulations and the direct observations that the deformation of DNA band during the injection process was induced by electroosmotic flow and consequently led to a poor resolution.     

Analysis of nonlinear transient responses of piezoelectric resonators

The electric transient response method is an effective technique to evaluate material constants of piezoelectric ceramics under high-power driving. In this study, we tried to incorporate nonlinear piezoelectric behaviors in the analysis of transient responses. As a base for handling the nonlinear piezoelectric responses, we proposed an assumption that the electric displacement is proportional to the strain without phase lag, which could be described by a real and constant piezoelectric e-coefficient. Piezoelectric constitutive equations including nonlinear responses were proposed to calculate transient responses of a piezoelectric resonator. The envelopes and waveforms of current and vibration velocity in transient responses observed in some piezoelectric ceramics could be fitted with the calculation including nonlinear responses. The procedure for calculation of mechanical quality factor Q(m) for piezoelectric resonators with nonlinear behaviors was also proposed.     

Nano-strip grating lines self-organized by a high speed scanning CW laser

After a laser annealing experiment on Si wafer, we found an asymmetric sheet resistance on the surface of the wafer. Periodic nano-strip grating lines (nano-SGLs) were self-organized along the trace of one-time scanning of the continuous wave (CW) laser. Depending on laser power, the nano-trench formed with a period ranging from 500 to 800 nm with a flat trough between trench structures. This simple method of combining the scanning laser with high scanning speed of 300 m min(-1) promises a large area of nanostructure fabrication with a high output. As a demonstration of the versatile method, concentric circles were drawn on silicon substrate rotated by a personal computer (PC) cooling fan. Even with such a simple system, the nano-SGL showed iridescence from the concentric circles.     

Anti-obesity and anti-diabetic effects of ethanol extract of Artemisia princeps in C57BL/6 mice fed a high-fat diet

Artemisia princeps is commonly used as a food ingredient and in traditional Asian medicine. In this study, we examined the effects of long-term administration of an ethanol extract of A. princeps (APE) on body weight, white adipose tissue, blood glucose, insulin, plasma and hepatic lipids, and adipocytokines in C57BL/6 mice fed a high-fat diet. Daily feeding of a 1% APE diet for 14 weeks normalized elevated body weight, white adipose tissue, and plasma glucose and insulin levels, and delayed impaired glucose tolerance in mice a fed high-fat diet. These events were not observed in mice fed a control diet containing 1% APE. Liver triglyceride and cholesterol levels were similar in mice fed a 1% APE-diet and those fed a control diet. In the high-fat diet groups, APE inhibited hepatic fatty acid synthase (FAS) and suppressed the elevation of plasma leptin, but had no effect on adiponectin levels. These findings suggest that the regulation of leptin secretion by APE may inhibit FAS activity with subsequent suppression of triglyceride accumulation in the liver and adipose tissues. Inhibition of lipid accumulation can, in turn, lead to improvements in impaired glucose tolerance.     

Low-dose CDDP and continuous 5-FU treatment of advanced gastric cancer with peritoneal dissemination: a case with long disease-free survival

The patient was diagnosed to have gastric cancer (T3 N3 M0 P3, Stage IV b). We conducted LcFP therapy. CDDP, 7 mg/m2/day, day 1-5 i.v. drip for 2 hours, and 5-FU, 170 mg/m2/day, day 1-7, i.v. continuously for 24 hours. After 3 courses (one course: 4 LcFPs followed by one rest week), down staging (T3 N2 M0 P1. Stage IV a) and improvement of performance status were obtained, and then surgical resection was undertaken. After operation one course of LcFP therapy served as adjuvant chemotherapy. The patient has survived over one year and 8 months to date in a tumor-free condition. LcFP therapy promises to be useful in the clinical management of advanced gastric cancer.     

Effect of cross-flow on the frequency of bubble formation from a single-hole nozzle

Bubble formation from a single-hole nozzle placed vertically upward in a rotating water bath was investigated using a high-speed video camera. Air was used as the working gas. The measured values of the frequency of bubble formation, f _B, were compared with those observed in a stationary bath, f _B0. The velocity of cross-flow, ν_θ, affected the bubble formation significantly when it exceeded a critical value, ν_θc . The ratio of f _B to f _B0 was unity for ν_θ≦ν_θc , but it changed in a complex manner for ν_θ>ν_θc . In the latter case, when the air flow rate Q _g was relatively low, f _B/f _B0 became larger than unity irrespective of Q _g, and an empirical correlation of f _B/f _B0 was proposed as a function of ν_θ and the inner diameter of the nozzle, d _ni. As the gas flow rate increased, f _B/f _B0 decreased monotonically and became smaller than unity, and an empirical correlation of f _B/f _B0 was derived as a function of Q _g, ν_θ, and d _ni. These empirical correlations could approximate the measured values of f _B/f _B0 within a scatter of −15 to +20 pct.     

Evaluation of Tensile Strength and Fracture Toughness of Yttria-Stabilized Zirconia Polycrystals with Fracture Surface Analysis

The tensile strength of yttria-stabilized tetragonal zirconia polycrystals (Y-TZPs) was measured and the fracture surfaces were analyzed with the scanning electron microscope and X-ray microanalyzer. The fracture origins of the pressureless-sintered samples were voids or inclusions such as A1₂O₃, A1₂O₃ with SiO₂, and cubic-ZrO₂, while the fracture origins of the hot isostatically pressed samples were inclusions; no voids were detected at fracture origins. The higher strengths of the hot isostatically pressed samples versus those of the pressureless-sintered samples were consistent with the change in fracture origins. The fracture toughness of the samples calculated from the tensile strength and analysis of the fracture origins was 3.4 to 3.7 MPa √m. These values are lower than those measured with the SEPB method. These discrepancies might be caused by the difference in the state of the fracture origin and its neighborhood, such as the size of the fracture origin and interaction between two surfaces in the precrack.