Hydrodynamics and liquid phase axial mixing in orifice pipe reactor

Two phase flow in a horizontal pipe, with orifice plates placed at regular intervals as obstructions, was studied for the effect of phase velocities on flow patterns, fractional phase hold-ups, pressure drop and liquid phase axial dispersion. Radioactive technetium-99m (as an aqueous solution of sodium pertechnatate) was used as tracer. A pulse injection technique with two point measurements was employed. Three different orifice diameters were used (8 mm, 16 mm, and 20 mm) in a pipe diameter of 32 mm. The orifice spacing was 500 mm in all cases. Superficial gas (air) velocity was varied over a range from 0.02 m/s to 1.0 m/s and superficial liquid (water) velocity from 0.03 m/s to 0.85 m/s. Different flow patterns under different flow conditions were identified and a generalised flow map is presented. Variations in hold-ups and pressure drop with flow patterns have been explained. Rational correlations have been developed for fractional phase hold-ups and pressure drop. A preliminary comparison of two phase gas-liquid flow in a horizontal pipe with orifice obstructions (to be called orifice pipe reactor), as a gas-liquid contacting device, is made with a conventional bubble column reactor. Recommendations have been made for future work.     

The yields of extracted leaf protein from lucerne (Medicago sativa L.)

The effects of fertilisers, frequency of cutting, row spacing and simazine on the yields of dry matter and extractable protein from lucerne (Medicago sativa L.) were studied using the laboratory-scale pulper and press. Between 40 and 65% protein nitrogen was extractable; extractability was not affected by the various treatments but altered with season. Lucerne responded with increased yields of dry matter and extractable protein to fertilisers, simazine (35 g/ha) and rows spaced at 30.5 cm. Six or 8 harvests were found to give greater yields than 5 harvests in 180 days. The annual yields of extractable protein reached 3100 kg/ha and it is felt that better control of pests could lead to even greater yields.     

Functional polymer–polymer/carbon nanotube bi-component fibers

Bi-component fibers typically combine multiple functions that arise from at least two distinct components. As a result, these fibers can incorporate carbon nanotubes, which impart specific and controllable mechanical, electrical, and thermal transport properties to the fibers. Using gel spinning, sheath-core polyacrylonitrile–polyacrylonitrile/carbon nanotube bi-component fibers with a diameter of less than 20 μm and carbon nanotube concentrations of up to 10 wt% were produced. In these fibers, the carbon nanotubes were well dispersed and aligned along the fiber axis. The fibers exhibited a tensile strength as high as 700 MPa, and a tensile modulus as high as 20 GPa, as well as enhanced electrical and thermal conductivities when compared to the fibers without carbon nanotubes.     

Effect of functionalization on dispersion of POSS‐silicone rubber nanocomposites

The nanocomposite of PDMS using functionalized fumed silica and nonreactive POSS as fillers were prepared by blend method in a planetary mixer. Fumed silica was functionalized by aliphatic and aromatic groups to study the filler–filler interactions with the aliphatic and aromatic POSS fillers and consequently their influence on the properties in the PDMS matrix. Transmission electron microscope (TEM) showed a good dispersion in the systems having the silica and POSS fillers with similar modifications. However, aliphatic and aromatic filler combinations showed more aggregated structures. Moreover, aliphatic POSS despite of good dispersion at higher loadings, act as lubricant, which is attributed to the disturbance in the PDMS‐ silica filler interaction and also the filler–filler interaction within fumed silica. There is a decrease in complex viscosity with the functionalization of fumed silica and with the aromatic/aliphatic POSS fillers. The thermal stability of aromatic functionalized fillers improves owing to the thermally stable phenyl groups. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Erbium-Ion-Doped Tellurite Glass Fibers and Waveguides—Devices and Future Prospective: Part II

Following on from Part I of this review article that focuses on the suitability of Er³⁺-doped tellurium oxide glass for optical amplification in fiber, this Part II article describes how the fiber gain data were then employed to engineer amplification in waveguides, which can be integrated with semiconductor pump sources. The gain characteristics and bandwidth of a phosphate modified tellurite waveguide formed on a GaAs substrate are discussed. The limiting structural compatibility of Er³⁺-doped tellurite glass with polydimethylsiloxane polymer for active–passive integration is overcome by adopting a nanoscale super-lattice approach for waveguide engineering.     

白炭黑胎面胶的新一代硅烷偶联剂

填充白炭黑的低滚动阻力轮胎的开发不断获得新进展。与填充普通炭黑的轮胎相比，白炭黑轮胎不仅降低了油耗，而且具有优异的牵引性能和与后者相当的磨耗寿命。高分散性白炭黑和多硫化双-烷氧基硅烷的发展使高填充白炭黑轮胎商品化获得重大突破。炭黑胶料和白炭黑-硅烷胶料的能耗散机理差异很大，     

Freestanding fiber mats of zeolitic imidazolate framework 7 via one‐step,scalable electrospinning

We demonstrated the fabrication of freestanding zeolitic imidazolate framework 7 (ZIF‐7) nanofiber (NF) mats by means of one‐step, scalable electrospinning. The formation of ZIF‐7 nanoparticles embedded in polymer fibers was unambiguously pinpointed via X‐ray diffraction, transmission electron microscopy, and adsorption studies. The NF mats exhibited excellent characteristics, with an average diameter of 245 nm, in the adsorption and desorption of carbon dioxide (CO₂); this makes them attractive candidates for gas separation and other selective filtration applications. This excellent property of the ZIF‐7 mats was explained by the gate‐opening phenomenon of ZIF‐7, which yielded a stepwise increase in the overall CO₂ uptake capacity. The mechanical strength of the NF mats was also obtained via large‐strain uniaxial tensile deformation, which enabled preliminary assessment of the mat's suitability for textiles and membranes in targeting separation and filtration applications with large‐area permeability. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43788.     

Segregation and intermixing in polydisperse liquid–solid fluidized beds: A multifluid model validation study

Multifluid model (MFM) simulations have been carried out on liquid–solid fluidized beds (LSFB) consisting of binary and higher-order polydisperse particle mixtures. The role of particle–particle interactions was found to be as crucial as the drag force under laminar and homogenous LSFB flow regimes. The commonly used particle–particle closure models are designed for turbulent and heterogeneous gas–solid flow regimes and thus exhibit limited to no success when implemented for LSFB operating under laminar and homogenous conditions. A need is perceived to carry out direct numerical simulations of liquid–solid flows and extract data from them to develop rational closure terms to account for the physics of LSFB. Finally, a recommendation flow regime map signifying the performance of the MFM has been proposed. This map will act as a potential guideline to identify whether or not the bed expansion characteristics of a given polydisperse LSFB can be correctly simulated using MFM closures tested.     

Reusable and Efficient Polystyrene Immobilized Ionic Liquid Catalyst for Batch and Flow Methylation of Hydroquinone

Catalysis Letters - An environmentally benign process for synthesizing 4-methoxyphenol through methylation of hydroquinone using polystyrene immobilized Bronsted acidic ionic liquid is presented....