Craze initiation,crack growth,and lifetime trends in fatigue of poly(vinylchloride)

The fatigue behavior of pure poly (vinylchloride) (PVC) and a PVC pipe compound has been investigated. Unnotched S-N lifetime, fatigue-crack growth, and craze/crack-initiation data are presented. The data trends, coupled with direct-microscopic observation, suggest that the unnotched-specimen lifetime in fatigue is dominated by the craze/crack-initiation process. This differs from the observed consistency of crack propagation and specimen-lifetime trends in several other polymers, whose failure can be traced to the initiation and growth to instability of a single dominant craze/crack.     

High-temperature mechanical behaviour of multidirectional Nicalon/CAS-II composite

High-temperature mechanical behaviour of Nicalon/CAS-II composite has been investigated. Oxidation of the exposed interfaces along matrix cracks at 1000 °C lowered the longitudinal unidirectional strength to the stress level at which matrix cracking began to occur. The strength of cross-plied composites was also severely reduced in 800 °C air. Transverse plies cracked prior to 0° ply matrix cracking. However, embrittlement did not occur until the matrix in the 0° plies cracked. It was established that oxidation does not take part in crack growth parallel to the fibres, except adjacent to exposed edges. Neither does oxygen enter 90° ply cracks in cross-plied composites in sufficient quantity to produce oxidation embrittlement, at least up to the 0° matrix cracking strain.The work was established while the author was at the Department of Chemical Engineering at Montana State University.     

Physicians' retirement

There are few guidelines available for physicians approaching retirement. Since many physicians do not enjoy their years after practice, guidelines for making this time of life enriching and a period of intellectual growth can be helpful.     

Multiple crazing at crack tips in PVC under plane strain conditions

The nature of the yield zone at the crack tip of poly(vinyl chloride) (PVC) pipe materials has been investigated. Microscopy studies employing a plasma etching technique reveal the presence of multiple crazes ahead of the crack tip in the interior of specimens of pure PVC, CaCO₃ filled PVC, and PVC pipe compound. The craze zone and the fracture toughness of blade-notched specimens are compared with those of fatigue pre-cracked specimens. Both types of specimens have similar fracture toughness values and form multiple crazes upon loading, suggesting that multiple crazing Is an intrinsic property of the material. The kinetics of craze initiation and the development of the multiple craze zones have also been explored.     

Fracture toughness and crack instability in tough polymers under plane strain conditions

The plane strain fracture toughness and fracture mechanisms of several tough engineering plastics have been studied and compared with poly(methyl methacrylate) (PMMA), a relatively brittle polymer. The tough polymers all are observed to form a multiple craze zone at the crack tip, which is shown to be the primary source of plane strain fracture toughness in these materials. The multiple craze zone is retained during slow crack growth but is metastable, and at a critical stress intensity and associated crack velocity, the system passes through a transition to a greatly accelerated single craze mode of unstable propagation.     

Solvent stress cracking and failure mechanisms in polyetherimide composites

Solvent stress cracking studies have been carried out in o-xylene and other solvents on polyetherimide (PEI) based materials including neat resin, woven fabric composites, and adhesively bonded systems. The results show crack growth in solvents at very low G_I levels as compared with tests in air. The composite and adhesively bonded systems have sufficiently high residual thermal stresses to drive an array of intersecting matrix/adhesive cracks even without mechanical loading. The matrix/adhesive residual stress driven crack patterns in these systems are shown to retard main delamination crack growth relative to that in the neat resin, and to raise the applied threshold G₁ level for main crack growth by about a factor of ten, as predicted by an approximate model.     

Effects of hot boning and moisture enhancement on the eating quality of cull cow beef

The effects of chilling method and moisture enhancement were examined for improving eating quality of semimembranosus (SM) and longissimus lumborum (LL) from 62 cull beef cows. Chilling method included hot boning muscles after 45 to 60 min postmortem or conventional chilling for 24 h. Moisture enhancement included 1) a non-injected control (CONT) or injection processing (10% of product weight) using 2) Sodium Tripolyphosphate/salt (Na/STP), 3) Sodium Citrate (NaCIT), 4) Calcium Ascorbate (CaASC), or 5) Citrus Juices (CITRUS). Chilling method by moisture enhancement treatment interactions (P < 0.09) were due to decreased hue, chroma and sarcomere length values in hot boned vs. conventionally chilled product (SM and LL) for CaASC vs. other moisture enhancement treatments. Chilling method by moisture enhancement treatment interactions (P < 0.05) were due to decreased shear force and increased tenderness in conventionally chilled vs. hot boned LL using CaASC vs. Na/STP. Moisture enhancement can improve tenderness of cull cow beef depending on combinations of chilling method and moisture enhancement treatments used.     

Fatigue of glass and carbon fiber reinforced engineering thermoplastics

Cyclic tension fatigue S-N curves are given for injection moleded Nylon 6/6, polycarbonate, polysulfone, polyphenylene sulfide, and poly(amide-imide) matrices with glass and carbon fibers as well as for unreinforced material. The S-N curves for most composites appear linear, with no evidence of a fatigue limit up to 10⁶ cycles. Some nonlinearity is evident with the Nylon 6/6 composities, and these appear to fail at a cumulative strain similar to the ultimate static strain. The remainder of the composites appear to fail by a crack propagation mechanism. The glass reinforced materials all degrade at a similar rate in fatigue, while the carbon reinforced materials with brittle matrices degrade more slowly than do those with ductile matrices. The latter effect may be due to greater integrity of the cracked regions for brittle matrix systems.     

Executive Function and Theory of Mind: Stability and Prediction From Ages 2 to 3.

Several studies have demonstrated a relation between executive functioning (EF) and theory of mind (ToM) in preschoolers, yet the developmental course of this relation remains unknown. Longitudinal stability and EF-ToM relations were examined in 81 children at 24 and 39 months. At Time 1, EF was unrelated to behavioral measures of ToM but was significantly related to parent report of children's internal-state language, independent of vocabulary size. At Time 2, behavioral batteries of EF and ToM were significantly related (r=.50, p     

Hydrophobic free energy eigenfunctions of pore, channel, and transporter proteins contain beta-burst patterns

Hydropathy plots are often used in place of missing physical data to model transmembrane proteins that are difficult to crystallize. The sequential maxima of their graphs approximate the number and locations of transmembrane segments, but potentially useful additional information about sequential hydrophobic variation is lost in this smoothing procedure. To explore a broader range of hydrophobic variations without loss of the transmembrane segment-relevant sequential maxima, we utilize a sequence of linear decompositions and transformations of the n-length hydrophobic free energy sequences, Hi, i = 1...n, of proteins. Constructions of hydrophobic free energy eigenfunctions, psil, from M-lagged, M x M autocovariance matrices, CM, were followed by their all-poles, maximum entropy power spectral, Somega(psil), and Mexican Hat wavelet, Wa,b(psil), transformations. These procedures yielded graphs indicative of inverse frequencies, omega-1, and sequence locations of hydrophobic modes suggestive of secondary and supersecondary protein structures. The graphs of these computations discriminated between Greek Key, Jelly Role, and Up and Down categories of antiparallel beta-barrel proteins. With these methods, examples of porins, connexins, hexose transporters, nuclear membrane proteins, and potassium but not sodium channels appear to belong to the Up and Down antiparallel beta-barrel variety.