On enhanced non-linear free surface flow simulations with a hybrid LBM–VOF model

In this paper, we present extensions, extensive validations and applications of our previously published hybrid volume-of-fluid-based (VOF) model for the simulation of free-surface flow problems. For the solution of the flow field, the lattice Boltzmann method is used, where the free surface is represented by a VOF approach. The advection equation for the VOF fill level is discretized with a finite volume method, on the basis of a 3D Piecewise Linear Interface Reconstruction (PLIC) algorithm. The model is validated for several standard free surface benchmarks, such as breaking dam scenarios and a free falling jet. Finally, the hybrid algorithm is applied to the simulation of a wave breaking by overturning during shoaling, which is considered to be a demanding test case, especially for VOF solvers. In this case, the flow field is initialized early in the shoaling process with a solitary wave solution from inviscid, irrotational potential flow. The wave breaking process is then simulated with the 3D transient and turbulent LBM–VOF solver. All validation and benchmark tests confirm the accuracy of the proposed hybrid model.     

Growing a list

It is easy to find expert knowledge on the Internet on almost any topic, but obtaining a complete overview of a given topic is not always easy: information can be scattered across many sources and must be aggregated to be useful. We introduce a method for intelligently growing a list of relevant items, starting from a small seed of examples. Our algorithm takes advantage of the wisdom of the crowd, in the sense that there are many experts who post lists of things on the Internet. We use a collection of simple machine learning components to find these experts and aggregate their lists to produce a single complete and meaningful list. We use experiments with gold standards and open-ended experiments without gold standards to show that our method significantly outperforms the state of the art. Our method uses the ranking algorithm Bayesian Sets even when its underlying independence assumption is violated, and we provide a theoretical generalization bound to motivate its use.     

TIME'S ARROW IN PARTICLE PHYSICS

This article gives an introduction into the current understanding of time invariance and evidence of its violation in experimental particle physics. The connection between time invariance and other discrete symmetries, particularly, CP-invariance, is explained. The first experimental determination of CP-violation is explained, and recent experiments on CP-violation and on T-violation are discussed.     

Spatial Wavefunction-Switched (SWS) InGaAs FETs with II–VI Gate Insulators

This paper presents the implementation of a novel InGaAs field-effect transistor (FET), using a ZnSe-ZnS-ZnMgS-ZnS stacked gate insulator, in a spatial wavefunction-switched (SWS) structural configuration. Unlike conventional FETs, SWS devices comprise two or more asymmetric coupled quantum wells (QWs). This feature enables carrier transfer vertically from one quantum well to another or laterally to the wells of adjacent SWS-FET devices by manipulation of the gate voltages (V _g). Observation of an extra peak (near both accumulation and inversion regions) in the capacitance–voltage data in an InGaAs-AlInAs two-quantum-well SWS structure is presented as evidence of spatial switching. The peaks are attributed to the appearance of carriers first in the lower well and subsequently their transfer to the upper well as the gate voltage is increased. The electrical characteristics of a fabricated SWS InGaAs FET are also presented along with simulations of capacitance–voltage (C–V) behavior, showing the effect of wavefunction switching between wells. Finally, logic operations involving simultaneous processing of multiple bits in a device, using coded spatial location of carriers in quantum well channels, are also described.     

Slip behaviour at cyclic pullout tests under transverse tension

In case of a reinforced concrete structure being exposed to bond stresses that transfer great forces, a relative displacement between reinforcing bar and concrete occurs. The slip is an important parameter in order to evaluate the quality of the bond concerning repeated pullout loads. A rapid slip increase is caused by bond weakening due to longitudinal cracks resulting from transverse tension. Within the bond area the slip is not uniformly distributed along the reinforcing bar. It is still unexplained how far fatigue and transverse tension affect the distribution. This paper focuses on the development of the slip curve under repeated loading and transverse tension. Results from cyclic pullout tests were applied and particularly the slip difference between the loaded and unloaded end of the pullout bar was investigated. It could be observed that both an increase in load cycles and transverse tension did not cause an appreciable change in slip difference.     

Modification of CaCO3 precipitation rates by water-soluble nacre proteins

Mineral growth in nacre and other CaCO₃-containing biominerals is controlled by biopolymers. Water-soluble proteins were extracted from nacre of the sea snail Haliotis laevigata by dissolving the mineral phase with 6% acetic acid. The influence of this protein mixture on CaCO₃ precipitation rates was investigated at different concentrations. A well-established assay for measuring the pH-value during CaCO₃ precipitation with and without protein additives was extended by calculating maximum precipitation rates from the pH-values. It could be shown that precipitation rates are greatly influenced by the mixtures of water-soluble nacre proteins. At very low protein concentrations (0.02 μg/ml) a rate enhancement in comparison to the pure supersaturated calcium carbonate solution by a factor of 1.4 was observed. At higher protein concentrations, a strong inhibitory effect occurred, with total inhibition at concentrations of 1.0 μg/ml and higher. Two unspecific proteins (bovine serum albumin and lysozyme) showed little or no modification of precipitation rates. In vivo, the function of the strong inhibition of CaCO₃ precipitation by nacre proteins at higher concentrations is presumably to prevent uncontrolled crystallization in the extrapallial fluid. The rate-enhancing capability of proteins at low concentrations may be explained by the presence of acidic and/or hydrophilic moieties.     

The Impact of Selective Oxidation on the Phase Transformation in the Sub‐Surface of Advanced High Strength Steels

The present paper contributes in the discussion of heterogeneous gas/metal reactions by discussing the influence of the dew point (dp) during intercritical annealing on the sub‐surface constitution. Annealing trials with different Advanced High Strength Steels (AHSS) were carried out and the element distribution within the sub‐surface was analysed by glow discharge optical emission spectrometer (GD‐OES). For modelling purpose the gained element distribution data were adjusted in a way that the selective oxidation products were considered within the sub‐surface element profiles. Several transformation temperatures along the depth profiles according to the adjusted GD‐OES data have been computed for the dp ?30 °C and +5 °C. In all cases the according models have been implemented in Matlab. The thermodynamic data have been obtained via the Matlab‐ThermoCalc interface. Empirical equations have been applied for the determination of the bainite and martensite start temperatures. It is shown that the sub‐surface constitution and the transformation temperature differ significantly. In most cases the change of the transformation temperature within the surface and sub‐surface reaches up to 100 °C compared to the bulk. For a Dual‐Phase (DP) Steel with C(0.15%)Mn(1.7%)Al(1.7%)Cr(0.5%), the change of the A_e1‐temperature is with 300 °C significantly higher. However one has to keep in mind that the 2‐phase composition can not be assumed to be constant during intercritical annealing. It is therefore concluded that for the purpose of simulating the selective oxidation processes during intercritical annealing of AHSS the continuous change of the sub‐surface constitution must be incorporated in the future work.